Magnetic resonance imaging study of water absorption in thermally modified pine wood

Holzforschung ◽  
2015 ◽  
Vol 69 (7) ◽  
pp. 899-907 ◽  
Author(s):  
Muhammad Asadullah Javed ◽  
Päivi M. Kekkonen ◽  
Susanna Ahola ◽  
Ville-Veikko Telkki
Keyword(s):  
Magnetic Resonance Imaging ◽  
Magnetic Resonance ◽  
Water Absorption ◽  
Free Water ◽  
Imaging Study ◽  
Gravimetric Analysis ◽  
Resonance Imaging ◽  
Noticeable Effect ◽  
Pine Wood ◽  
Environmentally Friendly Process

AbstractThermal modification is an environmentally friendly process that enhances the lifetime and properties of timber. In this work, the absorption of water in pine wood (Pinus sylvestris) samples, which were modified by the ThermoWood process, was studied by magnetic resonance imaging (MRI) and gravimetric analysis. The modification temperatures were varied between 180°C and 240°C. The data shows that the modification at 240°C and at 230°C decreases the water absorption rate significantly and slightly, respectively, while lower temperatures do not have a noticeable effect. MR images reveal that free water absorption in latewood (LW) is faster than in earlywood (EW), but in the saturated sample, the amount of water is greater in EW. Individual resin channels can be resolved in the high-resolution images, especially in LW regions of the modified samples, and their density was estimated to be (2.7±0.6) mm-2. TheT2relaxation time of water is longer in the modified wood than in the reference samples due to the removal of resin and extractives in the course of the modification process.

Dependence of Blood Clot Lysis on the Mode of Transport of Urokinase into the Clot - A Magnetic Resonance Imaging Study in Vitro

1991 ◽  
Vol 65 (05) ◽  
pp. 549-552 ◽  
Author(s):  
A Blinc ◽  
G Planinšič ◽  
D Keber ◽  
O Jarh ◽  
G Lahajnar ◽  
...  
Keyword(s):  
Magnetic Resonance Imaging ◽  
Magnetic Resonance ◽  
Pressure Difference ◽  
Volume Flow Rate ◽  
Blood Clot ◽  
Linear Regression Analysis ◽  
Imaging Study ◽  
Clot Lysis ◽  
Resonance Imaging

SummaryMagnetic resonance imaging was employed to study the dependence of clot lysing patterns on two different modes of transport of urokinase into whole blood clots. In one group of clots (nonperfused clots, n1 = 10), access of urokinase to the fibrin network was possible by diffusion only, whereas in the other group (perfused clots, n2 = 10) bulk flow of plasma containing urokinase was instituted through occlusive clots by a pressure difference of 3 .7 kPa (37 cm H2O) across 3 cm long clots with a diameter of 4 mm. It was determined separately that this pressure difference resulted in a volume flow rate of 5.05 ± 2.4 × 10−2 ml/min through occlusive clots. Perfused clots diminished in size significantly in comparison to nonperfused ones already after 20 min (p <0.005). Linear regression analysis of two-dimensional clot sizes measured by MRI showed that the rate of lysis was more than 50-times faster in the perfused group in comparison to the nonperfused group. It was concluded that penetration of the thrombolytic agent into clots by perfusion is much more effective than by diffusion. Our results might have some implications for understanding the differences in lysis of arterial and venous thrombi.

Sign in / Sign up

Export Citation Format

Share Document