On the applicability of a scan-based mobile mapping system for monitoring the planarity and subsidence of road surfaces – Pilot study on the A44n motorway in Germany

2020 ◽  
Vol 14 (1) ◽  
pp. 39-54 ◽  
Author(s):  
Erik Heinz ◽  
Christian Eling ◽  
Lasse Klingbeil ◽  
Heiner Kuhlmann
Keyword(s):  
Standard Deviation ◽  
Point Clouds ◽  
Road Surface ◽  
Control Points ◽  
Mobile Mapping ◽  
The Road ◽  
Mapping System ◽  
Road Surfaces ◽  
Mobile Mapping System ◽  
Physical Height

AbstractKinematic laser scanning is widely used for the fast and accurate acquisition of road corridors. In this context, road monitoring is a crucial application, since deficiencies of the road surface due to non-planarity and subsidence put traffic at risk. In recent years, a Mobile Mapping System (MMS) has been developed at the University of Bonn, consisting of a GNSS/IMU unit and a 2D laser scanner. The goal of this paper is to evaluate the accuracy and precision of this MMS, where the height component is of main interest. Following this, the applicability of the MMS for monitoring the planarity and subsidence of road surfaces is analyzed. The test area for this study is a 6 km long section of the A44n motorway in Germany. For the evaluation of the MMS, leveled control points along the motorway as well as point cloud comparisons of repeated passes were used. In order to transform the ellipsoidal heights of the MMS into the physical height system of the control points, undulations were utilized. In this respect, a local tilt correction for the geoid model was determined based on GNSS baselines and leveling, leading to a physical height accuracy of the MMS of < 10 mm (RMS). The related height precision has a standard deviation of about 5 mm. Hence, a potential subsidence of the road surface in the order of a few cm is detectable. In addition, the point clouds were used to analyze the planarity of the road surface. In the course of this, the cross fall of the road was estimated with a standard deviation of < 0.07 %. Yet, no deficiencies of the road surface in the form of significant rut depths or fictive water depths were detected, indicating the proper condition of the A44n motorway. According to our tests, the MMS is appropriate for road monitoring.

scholarly journals Generation of effective orthophotos for road surfaces using MMS

2014 ◽  
Vol XL-5 ◽  
pp. 621-628
Author(s):  
D. Yagishita ◽  
H. Chikatsu
Keyword(s):  
Laser Scanner ◽  
Road Surface ◽  
Mobile Mapping ◽  
Video Cameras ◽  
The Road ◽  
Lack Of Information ◽  
Mapping System ◽  
Road Surfaces ◽  
Mobile Mapping System ◽  
On The Road

In recent years, high precision and high resolution road surface orthophotos have been generated using video cameras mounted on surveying vehicles. However, there is a serious issue in generating an orthophoto from this image. The shadows of the surrounding structures and vehicles on the road surface cause a lack of information and decrease in visibility. Therefore, the shadows should be removed from the images for exact road management. On the other hand, the Mobile Mapping System with a laser scanner mounted on vehicles has been receiving more attention because the laser scanner intensity is almost unaffected by shadows. This paper presents shadow extraction and shadow correction for generating road surface orthophotos using the laser scanner intensity.

Pothole Mapping and Patching Quantity Estimates using LiDAR-Based Mobile Mapping Systems

2020 ◽  
Vol 2674 (9) ◽  
pp. 124-134
Author(s):  
Radhika Ravi ◽  
Ayman Habib ◽  
Darcy Bullock
Keyword(s):  
Point Clouds ◽  
Relative Accuracy ◽  
Mobile Mapping ◽  
Cloud Data ◽  
Pavement Distress ◽  
The Road ◽  
Mapping System ◽  
Mobile Mapping System ◽  
The Cost ◽  
Mapping Systems

Pavement distress or pothole mapping is important to public agencies responsible for maintaining roadways. The efficient capture of 3D point cloud data using mapping systems equipped with LiDAR eliminates the time-consuming and labor-intensive manual classification and quantity estimates. This paper proposes a methodology to map potholes along the road surface using ultra-high accuracy LiDAR units onboard a wheel-based mobile mapping system. LiDAR point clouds are processed to detect and report the location and severity of potholes by identifying the below-road 3D points pertaining to potholes, along with their depths. The surface area and volume of each detected pothole is also estimated along with the volume of its minimum bounding box to serve as an aide to choose the ideal method of repair as well as to estimate the cost of repair. The proposed approach was tested on a 10 mi-long segment on a U.S. Highway and it is observed to accurately detect potholes with varying severity and different causes. A sample of potholes detected in a 1 mi segment has been reported in the experimental results of this paper. The point clouds generated using the system are observed to have a single-track relative accuracy of less than ±1 cm and a multi-track relative accuracy of ±1–2 cm, which has been verified through comparing point clouds captured by different sensors from different tracks.

scholarly journals IQPC 2015 TRACK: TREE SEPARATION AND CLASSIFICATION IN MOBILE MAPPING LIDAR DATA

2015 ◽  
Vol XL-3/W3 ◽  
pp. 607-612 ◽  
Author(s):  
B. Gorte ◽  
S. Oude Elberink ◽  
B. Sirmacek ◽  
J. Wang
Keyword(s):  
Point Clouds ◽  
Mobile Mapping ◽  
The Road ◽  
Mapping System ◽  
Mobile Mapping System ◽  
Street Furniture ◽  
Set Up ◽  
Novel Algorithms ◽  
Individual Trees ◽  
System Point

The European FP7 project IQmulus yearly organizes several processing contests, where submissions are requested for novel algorithms for point cloud and other <i>big</i> geodata processing. This paper describes the set-up and execution of a contest having the purpose to evaluate state-of-the-art algorithms for Mobile Mapping System point clouds, in order to detect and identify (individual) trees. By the nature of MMS these are trees in the vicinity of the road network (rather than in forests). Therefore, part of the challenge is distinguishing between trees and other objects, such as buildings, street furniture, cars etc. Three submitted segmentation and classification algorithms are thus evaluated.

scholarly journals INVESTIGATING THE PERFORMANCE OF A HANDHELD MOBILE MAPPING SYSTEM IN DIFFERENT OUTDOOR SCENARIOS

2021 ◽  
Vol XLIII-B1-2021 ◽  
pp. 103-109
Author(s):  
E. Maset ◽  
S. Cucchiaro ◽  
F. Cazorzi ◽  
F. Crosilla ◽  
A. Fusiello ◽  
...  
Keyword(s):  
Laser Scanning ◽  
Point Clouds ◽  
Qualitative Assessment ◽  
Case Scenario ◽  
Mobile Mapping ◽  
Mapping System ◽  
Mobile Mapping System ◽  
Survey Instruments ◽  
Large Building

Abstract. In recent years, portable Mobile Mapping Systems (MMSs) are emerging as valuable survey instruments for fast and efficient mapping of both internal and external environments. The aim of this work is to assess the performance of a commercial handheld MMS, Gexcel HERON Lite, in two different outdoor applications. The first is the mapping of a large building, which represents a standard use-case scenario of this technology. Through the second case study, that consists in the survey of a torrent reach, we investigate instead the applicability of the handheld MMS for natural environment monitoring, a field in which portable systems are not yet widely employed. Quantitative and qualitative assessment is presented, comparing the point clouds obtained from the HERON Lite system against reference models provided by traditional techniques (i.e., Terrestrial Laser Scanning and Photogrammetry).

scholarly journals Novel Approach to Automatic Traffic Sign Inventory Based on Mobile Mapping System Data and Deep Learning

2020 ◽  
Vol 12 (3) ◽  
pp. 442 ◽  
Author(s):  
Jesús Balado ◽  
Elena González ◽  
Pedro Arias ◽  
David Castro
Keyword(s):  
False Positive Rate ◽  
Good Condition ◽  
Point Clouds ◽  
Traffic Sign ◽  
Mobile Mapping ◽  
Traffic Signs ◽  
Novel Approach ◽  
Mapping System ◽  
Positive Rate ◽  
Mobile Mapping System

Traffic signs are a key element in driver safety. Governments invest a great amount of resources in maintaining the traffic signs in good condition, for which a correct inventory is necessary. This work presents a novel method for mapping traffic signs based on data acquired with MMS (Mobile Mapping System): images and point clouds. On the one hand, images are faster to process and artificial intelligence techniques, specifically Convolutional Neural Networks, are more optimized than in point clouds. On the other hand, point clouds allow a more exact positioning than the exclusive use of images. The false positive rate per image is only 0.004. First, traffic signs are detected in the images obtained by the 360° camera of the MMS through RetinaNet and they are classified by their corresponding InceptionV3 network. The signs are then positioned in the georeferenced point cloud by means of a projection according to the pinhole model from the images. Finally, duplicate geolocalized signs detected in multiple images are filtered. The method has been tested in two real case studies with 214 images, where 89.7% of the signals have been correctly detected, of which 92.5% have been correctly classified and 97.5% have been located with an error of less than 0.5 m. This sequence, which combines images to detection–classification, and point clouds to geo-referencing, in this order, optimizes processing time and allows this method to be included in a company’s production process. The method is conducted automatically and takes advantage of the strengths of each data type.

Curb Detection and Accessibility Evaluation from Low-Density Mobile Mapping Point Cloud Data

2018 ◽  
Vol 12 (3) ◽  
pp. 376-385
Author(s):  
Kiichiro Ishikawa ◽  
Daisuke Kubo ◽  
Yoshiharu Amano ◽  
◽  
Keyword(s):  
Point Clouds ◽  
Noise Removal ◽  
Low Density ◽  
Mobile Mapping ◽  
Cloud Data ◽  
Mapping System ◽  
Mobile Mapping System ◽  
System Data ◽  
Scan Data

Our goal is to automatically classify objects from Mobile Mapping System data to enable the automatic construction of dynamic maps. We aimed at the extraction of curbstones and classification of curb types. Although there is much research about curbstones being recognized from laser-scanned point clouds, there are few methods to classify curb types. In this paper, we propose a method to extract curbstones from low-density-type laser scan data. We also propose a method to distinguish whether curbstones allow access to off-road facilities. Evaluation tests give anF-measure of ≥94.4% and an accessibility classification accuracy of ≥99.6%. Moreover, the results of applying multiple filters to noise removal are compared.

Sign in / Sign up

Export Citation Format

Share Document