The CANDLE burnup strategy applied to small modular pressurized water reactor loading with fully ceramic microencapsulated fuel

Kerntechnik ◽  
2022 ◽  
Vol 0 (0) ◽  
Author(s):  
Jinfeng Huang ◽  
Jiaming Jiang
Keyword(s):  
Equilibrium State ◽  
Power Plants ◽  
Reactor Core ◽  
Severe Accident ◽  
Pressurized Water Reactor ◽  
Pressurized Water ◽  
Water Reactor ◽  
The Core ◽  
Core Height ◽  
Optimization Schemes

Abstract For post-Fukushima nuclear power plants, there has been interested in accident-tolerant fuel (ATF) since it has better tolerant in the event of a severe accident. The fully ceramic microencapsulated (FCM) fuel is one kind of the ATF materials. In this study, the small modular pressurized water reactor (PWR) loading with FCM fuels was investigated, and the modified Constant Axial shape of Neutron flux, nuclide number densities and power shape During Life of Energy producing reactor (CANDLE) burnup strategy was successfully applied to such compact reactor core. To obtain ideal CANDLE shape, it’s necessary to set the infinity or enough length of the core height, but that is impossible for small compact core setting infinity or enough length of the core height. Due to the compact and finite core, the equilibrium state can only be maintained short periods and is not obvious, other than infinitely long active core to reach the long equilibrium state for ideal CANDLE. Consequently, the modified CANDLE shape would be presented. The approximate characteristics of CANDLE burnup are observed in the finite and compact core, and the power density and fuel burnup are selected as main characteristic of modified CANDLE burnup. In this study, firstly, lots of optimization schemes were discussed, and one of optimization schemes was chosen at last to demonstrate the modified CANDLE burnup strategy. Secondly, for chosen compact small rector core, the modified CANDLE burnup strategy is applied and presented. Consequently, the new characteristics of this reactor core can be discovered both in ignition region and in fertile region. The results show that application of CANDLE burnup strategy to small modular PWR loading with FCM fuels suppresses the excess reactivity effectively and reduces the risk of small PWR reactivity-induced accidents during the whole core life, which makes the reactor control more safety and simple.

scholarly journals Analysis of thermal hydraulic behavior of KONVOI PWR during a design extension condition

2021 ◽  
pp. 4-4
Author(s):  
Salwa Helmy ◽  
Magy Kandil ◽  
Ahmed Refaey
Keyword(s):  
Power Plants ◽  
Pressurized Water Reactor ◽  
Fuel Temperature ◽  
Pressurized Water ◽  
Water Reactor ◽  
The Core ◽  
Loss Of Coolant Accident ◽  
Hydraulic Behaviour ◽  
Loss Of Coolant ◽  
Safety Systems

In Nuclear Power Plants the Design Extension Conditions are more complex and severe than those postulated as Design Basis Accidents, therefore, they must be taken into account in the safety analyses. In this study, many hypothetical investigated transients are applied on KONVOI pressurized water reactor during a 6-in. (182 cm2) cold leg Small Break Loss-of-Coolant-Accident to revise the effects of all safety systems ways through their availability/ nonavailability on the thermal hydraulic behaviour of the reactor. The investigated transients are represented through three cases of Small Break Loss-of-Coolant-Accident as, case-1, without scram and all of the safety systems are failure, case-2, the normal scram actuation with failure of all safety systems (nonavailability), and finally case 3, with normal actuation scram sequence and normal sequential actuation of all safety systems (availability). These three investigated transient cases are simulated by creation a model using Analysis of Thermal-Hydraulics of LEaks and Transient code. In all transient cases, all types of reactivity feedbacks, boron, moderator density, moderator temperature and fuel temperature are considered. The steady-state results are nearly in agreement with the plant parameters available in previous literatures. The results show the importance effects of the feedbacks reactivity at Loss-of-Coolant-Accident on the fallouts power, since they are considered the key parameters for controlling the clad and fuel temperatures to maintain them below their melting point. Moreover, the calculated results in all cases show that the thermal hydraulic parameters are in acceptable ranges and encounter the safety criterion during Loss-of-Coolant-Accident the Design Extension Conditions accidents processes. Furthermore, the results show that the core uncovers and fuel heat up do not occur in KONVOI pressurized water reactor in theses the Design Extension Conditions simulations since, all safety systems provide adequate core cooling by sufficient water inventory into the core to cover it.

scholarly journals Neutronic Analysis of Small Long-Life Pressurized Water Reactor Using (Th-U)O2 Fuels with Gd2O3 and Pa-231 as Burnable Poisons

2020 ◽  
Vol 31 (1) ◽  
pp. 10-15
Author(s):  
Duwi Hariyanto ◽  
Nining Yuningsih ◽  
Sidik Permana
Keyword(s):  
Uranium Dioxide ◽  
Power Plants ◽  
Volume Fraction ◽  
Reactor Core ◽  
Pressurized Water Reactor ◽  
Pressurized Water ◽  
Water Reactor ◽  
Nuclear Data Library ◽  
Long Life ◽  
Enriched Uranium

The requirement for electricity increases with the growth of the human population. The existing power plants have not been able to fulfill all electricity requirements, especially in remote areas. The small long-life pressurized water reactor (PWR) is one of the solutions and innovations in nuclear technology that can produce electrical energy for a long time without refueling. This study aimed to analyze the neutronic of small long-life PWR that using Thorium-Uranium dioxide ((Th-U)O2) fuels with enriched Uranium-235 (U-235) and the addition of Gadolinium (Gd2O3) and Protactinium-231 (Pa-231) as the burnable poisons. The SRAC Code with the JENDL-4.0 nuclear data library had been used for the calculation method. In this study, the geometry of the two-dimensional (R-Z) reactor core with different fuel volume fraction was analyzed. Moreover, variations of the Uranium-235, Gadolinium, and Protactinium-231 fractions in the fuels were carried out. The result in this study was a PWR 420 MWt design using 60% Uranium dioxide fuel with enriched Uranium-235 of 10%-11%-12% and the addition of 0,0125% Gadolinium and 1,0% Protactinium-231 as the burnable poisons that could operate for thirteen years without refueling. The small long-life PWR design could produce a power density of 85,1 watts/cc with the reactivity for less than 4,6% dk/k.

scholarly journals A RELAP5 model for the thermal-hydraulic analysis of a typical pressurized water reactor

2010 ◽  
Vol 14 (1) ◽  
pp. 79-88 ◽  
Author(s):  
Said Agamy ◽  
Adul Metwally ◽  
Mohammad Al-Ramady ◽  
Sayed Elaraby
Keyword(s):  
Power Plants ◽  
Natural Circulation ◽  
Reactor Core ◽  
Cooling Water ◽  
Pressurized Water Reactor ◽  
Hydraulic Analysis ◽  
Pressurized Water ◽  
Water Reactor ◽  
Operator Action ◽  
Thermal Hydraulic Analysis

This study describes a RELAP5 computer code for thermal-hydraulic analysis of a typical pressurized water reactor. RELAP5 is used to calculate the thermal hydraulic characteristics of the reactor core and the primary loop under steady-state and hypothetical accidents conditions. New designs of nuclear power plants are directed to increase safety by many methods like reducing the dependence on active parts (such as safety pumps, fans, and diesel generators ) and replacing them with passive features (such as gravity draining of cooling water from tanks, and natural circulation of water and air). In this work, high and medium pressure injection pumps are replaced by passive injection components. Different break sizes in cold leg pipe are simulated to analyze to what degree the plant is safe (without any operator action) by using only these passive components. Also station blackout accident is simulated and the time response of operator action has been discussed.

CFD Analysis of the Coolant Mixing within the Upper Plenum of a Pressurized Water Reactor (PWR)

2013 ◽  
Vol 444-445 ◽  
pp. 411-415 ◽  
Author(s):  
Fu Cheng Zhang ◽  
Shen Gen Tan ◽  
Xun Hao Zheng ◽  
Jun Chen
Keyword(s):  
Temperature Distribution ◽  
Fluid Dynamic ◽  
Characteristic Temperature ◽  
Reactor Core ◽  
Flow Distribution ◽  
Sensitivity Study ◽  
Cfd Model ◽  
Pressurized Water Reactor ◽  
Pressurized Water ◽  
Water Reactor

In this study, a Computational Fluid Dynamic (CFD) model is established to obtain the 3-D flow characteristic, temperature distribution of the pressurized water reactor (PWR) upper plenum and hot-legs. In the CFD model, the flow domain includes the upper plenum, the 61 control rod guide tubes, the 40 support columns, the three hot-legs. The inlet boundary located at the exit of the reactor core and the outlet boundary is set at the hot-leg pipes several meters away from upper plenum. The temperature and flow distribution at the inlet boundary are given by sub-channel codes. The computational mesh used in the present work is polyhedron element and a mesh sensitivity study is performed. The RANS equations for incompressible flow is solved with a Realizable k-ε turbulence model using the commercial CFD code STAR-CCM+. The analysis results show that the flow field of the upper plenum is very complex and the temperature distribution at inlet boundary have significant impact to the coolant mixing in the upper plenum as well as the hot-legs. The detailed coolant mixing patterns are important references to design the reactor core fuel management and the internal structure in upper plenum.

scholarly journals Contribution to the study of fission products release from nuclear fuels in severe accident conditions: effect of the pO2 on Cs, Mo and Ba speciation

2020 ◽  
Vol 6 ◽  
pp. 2 ◽  
Author(s):  
Claire Le Gall ◽  
Fabienne Audubert ◽  
Jacques Léchelle ◽  
Yves Pontillon ◽  
Jean-Louis Hazemann
Keyword(s):  
Oxygen Potential ◽  
Fission Products ◽  
Severe Accident ◽  
Pressurized Water Reactor ◽  
Pressurized Water ◽  
Water Reactor ◽  
Mox Fuel ◽  
Chemical Behaviour ◽  
Accident Conditions ◽  
The Impact

The objective of this work is to experimentally investigate the effect of the oxygen potential on the fuel and FP chemical behaviour in conditions representative of a severe accident. More specifically, the speciation of Cs, Mo and Ba is investigated. These three highly reactive FP are among the most abundant elements produced through 235U and 239Pu thermal fission and may have a significant impact on human health and environmental contamination in case of a light water reactor severe accident. This work has set out to contribute to the following three fields: providing experimental data on Pressurized Water Reactor (PWR) MOX fuel behaviour submitted to severe accident conditions and related FP speciation; going further in the understanding of FP speciation mechanisms at different stages of a severe accident; developing a method to study volatile FP behaviour, involving the investigation of SIMFuel samples manufactured at low temperature through SPS. In this paper, a focus is made on the impact of the oxygen potential towards the interaction between irradiated MOX fuels and the cladding, the interaction between Mo and Ba under oxidizing conditions and the assessment of the oxygen potential during sintering.

Sign in / Sign up

Export Citation Format

Share Document