Determination of spatial distribution of thermal-radiation sources by Monte-Carlo method

Author(s):  
S. A. UHINOV
2019 ◽  
pp. 69-74
Author(s):  
V.G. Rudychev ◽  
N.A. Azarenkov ◽  
I.O. Girka ◽  
D.V. Rudychev ◽  
Y.V. Rudychev

A technique to reduce the dose rates, produced by large-sized ground-based radiation sources with dozens of radiating elements of the same geometry arranged along the perimeter, is developed. The radiating elements represent the concrete rectangular casks into which cylindrical barrels filled with compacted RW are loaded. The spatial distribution of the radiation around the cask is calculated by the Monte Carlo method. The radiation is assumed to be produced by the definite radionuclides of RW. Shielding by neighboring containers and the presence of an additional biological shielding are taken into account. Different options of the container arrangement are considered.


2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Ronny Peter ◽  
Luca Bifano ◽  
Gerhard Fischerauer

Abstract The quantitative determination of material parameter distributions in resonant cavities is a relatively new method for the real-time monitoring of chemical processes. For this purpose, electromagnetic resonances of the cavity resonator are used as input data for the reverse calculation (inversion). However, the reverse calculation algorithm is sensitive to disturbances of the input data, which produces measurement errors and tends to diverge, which leads to no measurement result at all. In this work a correction algorithm based on the Monte Carlo method is presented which ensures a convergent behavior of the reverse calculation algorithm.


2020 ◽  
Vol 10 (12) ◽  
pp. 4229 ◽  
Author(s):  
Alexander Heilmeier ◽  
Michael Graf ◽  
Johannes Betz ◽  
Markus Lienkamp

Applying an optimal race strategy is a decisive factor in achieving the best possible result in a motorsport race. This mainly implies timing the pit stops perfectly and choosing the optimal tire compounds. Strategy engineers use race simulations to assess the effects of different strategic decisions (e.g., early vs. late pit stop) on the race result before and during a race. However, in reality, races rarely run as planned and are often decided by random events, for example, accidents that cause safety car phases. Besides, the course of a race is affected by many smaller probabilistic influences, for example, variability in the lap times. Consequently, these events and influences should be modeled within the race simulation if real races are to be simulated, and a robust race strategy is to be determined. Therefore, this paper presents how state of the art and new approaches can be combined to modeling the most important probabilistic influences on motorsport races—accidents and failures, full course yellow and safety car phases, the drivers’ starting performance, and variability in lap times and pit stop durations. The modeling is done using customized probability distributions as well as a novel “ghost” car approach, which allows the realistic consideration of the effect of safety cars within the race simulation. The interaction of all influences is evaluated based on the Monte Carlo method. The results demonstrate the validity of the models and show how Monte Carlo simulation enables assessing the robustness of race strategies. Knowing the robustness improves the basis for a reasonable determination of race strategies by strategy engineers.


Sign in / Sign up

Export Citation Format

Share Document