scholarly journals Microstructure evaluation, thermal and mechanical characterization of hybrid metal matrix composite

2018 ◽  
Vol 25 (6) ◽  
pp. 1187-1196 ◽  
Author(s):  
Shyam Lal ◽  
Sudhir Kumar ◽  
Zahid A. Khan
Keyword(s):  
Metal Matrix Composite ◽  
Matrix Composite ◽  
Metal Matrix ◽  
Casting Process ◽  
Xrd Analysis ◽  
Stir Casting ◽  
Al 7075 ◽  
Dta Analysis ◽  
Hybrid Metal Matrix Composite ◽  
7075 Alloy

AbstractIn this paper, an inert gas assisted electromagnetic stir casting process is adapted for manufacturing a cast hybrid metal matrix composite (MMC) using Al2O3 and SiC particulates as a hard phase reinforcement in Al 7075 alloy metal matrix. Four different samples containing 5, 10, 15 and 20 wt% of Al2O3 and SiC with Al 7075 alloy composites were fabricated. The characterizations for all the samples were carried out through optical microstructure, scanning electron microscopy (SEM) fractograph, X-ray diffraction (XRD) analysis, differential thermal analysis (DTA) analysis and mechanical properties. The results revealed that the particles are uniformly distributed in the matrix. No peaks of Al4C3 were found. There is negligible loss of material in the composite. The tensile strength and microhardness of the hybrid composite are higher by 65.7% and 13.5%, respectively, when compared to its cast metal matrix Al 7075 alloy.

Corrosion Behavior of AA2014/SiC Metal Matrix Composite Fabricated by Stir Casting Process

2016 ◽  
Vol 4 (3) ◽  
pp. 1
Author(s):  
PRAKASH DWIVEDI SHASHI ◽  
SHARMA ANAND ◽  
PRATAP RAO SHASHANK ◽  
BAHUGUNA SUMIT ◽  
◽  
...  
Keyword(s):  
Metal Matrix Composite ◽  
Corrosion Behavior ◽  
Matrix Composite ◽  
Metal Matrix ◽  
Casting Process ◽  
Stir Casting

Investigation of Tensile Property of Aluminium SiC Metal Matrix Composite

2015 ◽  
Vol 766-767 ◽  
pp. 252-256 ◽  
Author(s):  
A. Siddique Ahmed Ghias ◽  
B. Vijaya Ramnath
Keyword(s):  
Composite Material ◽  
Metal Matrix Composite ◽  
Matrix Composite ◽  
Metal Matrix ◽  
Matrix Material ◽  
Chemical Properties ◽  
High Strength ◽  
Stir Casting ◽  
The Matrix ◽  
Hybrid Metal Matrix Composite

The composite material is a combination of two or more materials with different physical and chemical properties. The composite has superior characteristics than those individual components. A hybrid composite is the one which contains at least three materials. When the matrix material is a metal, the composite is termed as metal matrix composites (MMC). The MMC is a composite material with two constituent parts, one being a metal. The other material may be another metal, ceramic or fiber. Among all the MMC’s, Aluminium is the most widely used matrix material due to its light weight, high strength and hardness. This paper deals with the fabrication and mechanical investigation of hybrid metal matrix composite Al - SiC. The fabrication is done by stir casting by adding the required quantities of additives into the stirred molten Aluminium. The results show significant effect of mechanical properties such as tensile strength, yield stress and flexural strength. The internal structure of the composite is observed using Scanning electron microscope (SEM) and found that are formation of pores in them.

The Mechanical Characterization of Al2O3 Reinforced AL6061 Metal Matrix Composite

2015 ◽  
Vol 766-767 ◽  
pp. 257-262
Author(s):  
P. Mohan ◽  
M. Kathirvel ◽  
N. Azhagesan ◽  
M. Sivapragash
Keyword(s):  
Fracture Toughness ◽  
Metal Matrix Composite ◽  
Matrix Composite ◽  
Material Characterization ◽  
Metal Matrix ◽  
Treatment Process ◽  
Mechanical Characterization ◽  
Casting Process ◽  
Stir Casting

The aluminium based composites are increasingly being used in the transport, aerospace, marine, automobile and mineral processing industries. The widely used reinforcing materials for these composites are silicon carbide, aluminium oxide and graphite in the form of particles or whiskers. In this study Al6061-6 & 4wt% Al2O3 based metal matrix composite were produced by mechanical stir casting process. The obtained cast metal matrix composite is carefully machined to prepare the test specimens for hardness, tensile as well as fracture toughness studies as per ASTM standards. The hardness, tensile strength and fracture toughness properties of Al6061-Al2O3 composites are explored experimentally. Finally compare the material characterization with heat treatment process sample and compare the fracture toughness of sample with mathematical approach, experimental and finite element method.

Microstructural Studies of Aluminium 7075-Silicon Carbide-Alumina Metal Matrix Composite

2014 ◽  
Vol 984-985 ◽  
pp. 194-199 ◽  
Author(s):  
B. Rajeswari ◽  
K.S. Amirthagadeswaran ◽  
K. Ramya
Keyword(s):  
Silicon Carbide ◽  
Metal Matrix Composite ◽  
Matrix Composite ◽  
Metal Matrix ◽  
Stir Casting ◽  
Optical Microscope ◽  
Homogeneous Distribution ◽  
Modern Development ◽  
Al 7075 ◽  
Composite Samples

The modern development in the field of science and technology has created a demand for many advanced engineering materials. In recent days, aluminium related metal matrix composite is a probable material for many applications such as transport, aerospace, marine and automobile applications. In this paper, experiments were conducted on composite having various weight fractions of SiC and Al2O3particulates fabricated by stir casting method. Characterization studies were conducted on the Al 7075 alloy and composite samples to assess the hardness and microstructural properties. Final samples were tested for hardness using vickers hardness machine. Microstructure examination was conducted by optical microscope. Microstructure of the composite samples reveals the presence and homogeneous distribution of reinforcements in the Al 7075 matrix. The hardness of aluminium metal matrix composites was increased due to the addition of silicon carbide and alumina reinforcements.

scholarly journals Experimental Evaluation of Mechanical, Wear and Corrosion properties of AA5083/Graphite Metal Matrix Composite Prepared using Compocasting Process

2019 ◽  
Vol 9 (1) ◽  
pp. 2352-2357
Keyword(s):  
Tensile Strength ◽  
Metal Matrix Composite ◽  
Matrix Composite ◽  
Metal Matrix ◽  
Matrix Material ◽  
Research Work ◽  
Casting Process ◽  
Stir Casting ◽  
Corrosion Properties ◽  
Mechanical And Tribological Properties

In most of the engineering applications such as aviation, defence, marine and automotive requires components with light weight and along with favorable mechanical properties; this demand perhaps satisfied by metal matrix composites (MMCs) of aluminium by virtue of its distinguished achievement. Also MMCs suffer from insufficient process stability, in-adequate economic efficiency and reliability. In the present research work an experiment was developed to synthesize metal matrix composite adopting Aluminium Alloy (AA) 5083 as matrix material reinforced with graphite particulates (6 wt %, 8 wt % & 10 wt %) using two stage in-situ stir casting process. Experiments were implemented to analyze mechanical and tribological properties like ultimate tensile strength, microhardness, wear characteristics and corrosion properties. From the above investigations, it is revealed that microhardness increases with decrease in tensile strength with upsurge in more wt % of reinforcement. Due to the very high self-lubricating property of graphite significant reduction in wear can be observed with deepen in wt % of graphite. Also corrosion rate decreases with more amount of graphite particulate when compared with base matrix material.

Mechanical Properties and Microstructural Behavior of a Metal Matrix Composite Processed by Severe Plastic Deformation Techniques

MRS Advances ◽  
2015 ◽  
Vol 1 (58) ◽  
pp. 3865-3870 ◽  
Author(s):  
Shima Sabbaghianrad ◽  
Terence G. Langdon
Keyword(s):  
Plastic Deformation ◽  
Severe Plastic Deformation ◽  
Metal Matrix Composite ◽  
Matrix Composite ◽  
Metal Matrix ◽  
Room Temperature ◽  
High Pressure Torsion ◽  
Average Grain Size ◽  
Al 7075 ◽  
7075 Alloy

ABSTRACTA severe plastic deformation (SPD) technique was applied to an Al-7075 alloy reinforced with 10 vol.% Al2O3. This processing method of high-pressure torsion (HPT) was performed at room temperature under a pressure of 6.0 GPa through a total number of up to 20 turns. The metal matrix composite (MMC) showed a significant grain refinement from an initial average grain size of ∼8 μm to ∼300 nm after processing by HPT through 20 turns which led to an increase in the average values of Vickers microhardness at room temperature.

Sign in / Sign up

Export Citation Format

Share Document