Gas Turbine Diagnostics Under Variable Operating Conditions

2007 ◽  
Vol 24 (3-4) ◽  
Author(s):  
I. Loboda ◽  
Y. Feldshteyn ◽  
S. Yepifanov
Keyword(s):  
Gas Turbine ◽  
Operating Conditions ◽  
Variable Operating Conditions

Gas Turbine Diagnostics Under Variable Operating Conditions

2007 ◽  
Author(s):  
Igor Loboda ◽  
Yakov Feldshteyn ◽  
Sergiy Yepifanov
Keyword(s):  
Gas Turbine ◽  
Health Monitoring ◽  
Correct Diagnosis ◽  
Diagnostic System ◽  
Diagnostic Technique ◽  
Operating Conditions ◽  
Diagnostic Process ◽  
Ambient Conditions ◽  
Operating Points ◽  
Variable Operating Conditions

Operating conditions (control variables and ambient conditions) of gas turbine plants and engines vary considerably. The fact that health monitoring has to be uninterrupted creates the need for a run time diagnostic system to operate under any conditions. The diagnostic technique described in this paper utilizes the thermodynamic models in order to simulate gaspath faults and uses neural networks for the faults localization. This technique is repeatedly executed and the diagnoses are registered. On the basis of these diagnoses and beforehand known faults, the correct diagnosis probabilities are then calculated. The present paper analyses the influence of the operating conditions on a diagnostic process. In the technique, different options are simulated of a diagnostic treatment of the measured values obtained under variable operating conditions. The mentioned above probabilities help to compare these options. The main focus of the paper is on the so called multipoint (multimode) diagnosis that groups the data from different operating points (modes) to set only a single diagnosis.

Research on Prediction of NOx Emission Performance of Marine Gas Turbine Under Variable Operating Conditions

2020 ◽  
Author(s):  
Jian Li ◽  
Zhitao Wang ◽  
Tielei Li ◽  
Shuying Li
Keyword(s):  
Gas Turbine ◽  
Chemical Reactor ◽  
Operating Conditions ◽  
Nox Emissions ◽  
Chemical Reactor Network ◽  
Computational Fluid Dynamics Cfd ◽  
Reactor Network ◽  
D Model ◽  
Operating Points ◽  
Variable Operating Conditions

Abstract With the global warming, many countries pay more attention to environmental pollution. The NOx emissions has become an important index when gas turbine designed. This paper provides a method for predicting NOx emissions of marine gas turbine under variable operating conditions. Firstly build the 3-D model of combustor. The characteristic regions of combustor were divided according to the reaction principle. Then build the chemical reactor network (CRN) models of different characteristic regions. According to the NOx emissions of several specific operating points simulated by computational fluid dynamics (CFD), fit the relation between residence time and operating conditions by Newton interpolation in the CRN models. Then the prediction model of NOx emissions of gas turbine was established by using neural network. The NOx emissions under 0.7∼1.0 working conditions and 0.019∼0.023 fuel-air ratios can be predicted efficiently.

Investigations of Road Wear Caused by Studded Tires

2014 ◽  
Vol 42 (1) ◽  
pp. 2-15
Author(s):  
Johannes Gültlinger ◽  
Frank Gauterin ◽  
Christian Brandau ◽  
Jan Schlittenhard ◽  
Burkhard Wies
Keyword(s):  
Traffic Safety ◽  
Test Bench ◽  
Operating Conditions ◽  
Test Method ◽  
Analytical Models ◽  
The Road ◽  
Driving Speed ◽  
Major Factors ◽  
Tire Friction ◽  
Variable Operating Conditions

ABSTRACT The use of studded tires has been a subject of controversy from the time they came into market. While studded tires contribute to traffic safety under severe winter conditions by increasing tire friction on icy roads, they also cause damage to the road surface when running on bare roads. Consequently, one of the main challenges in studded tire development is to reduce road wear while still ensuring a good grip on ice. Therefore, a research project was initiated to gain understanding about the mechanisms and influencing parameters involved in road wear by studded tires. A test method using the institute's internal drum test bench was developed. Furthermore, mechanisms causing road wear by studded tires were derived from basic analytical models. These mechanisms were used to identify the main parameters influencing road wear by studded tires. Using experimental results obtained with the test method developed, the expected influences were verified. Vehicle driving speed and stud mass were found to be major factors influencing road wear. This can be explained by the stud impact as a dominant mechanism. By means of the test method presented, quantified and comparable data for road wear caused by studded tires under controllable conditions can be obtained. The mechanisms allow predicting the influence of tire construction and variable operating conditions on road wear.

Treatment system response to transient AOX (adsorbable organic halogen) loadings

1997 ◽  
Vol 35 (2-3) ◽  
pp. 85-91
Author(s):  
D. A. Barton ◽  
J. D. Woodruff ◽  
T. M. Bousquet ◽  
A. M. Parrish
Keyword(s):  
Paper Industry ◽  
Model Development ◽  
Operating Conditions ◽  
System Response ◽  
Additional Information ◽  
Organic Halogen ◽  
Aox Removal ◽  
Variable Operating Conditions ◽  
Plant Shutdown

If promulgated as proposed, effluent guidelines for the U.S. pulp and paper industry will impose average monthly and maximum daily numerical limits of discharged AOX (adsorbable organic halogen). At this time, it is unclear whether the maximum-day variability factor used to establish the proposed effluent guidelines will provide sufficient margin for mills to achieve compliance during periods of normal but variable operating conditions within the pulping and bleaching processes. Consequently, additional information is needed to relate transient AOX loadings with final AOX discharges. This paper presents a simplistic dynamic model of AOX decay during treatment. The model consists of hydraulic characterization of an activated sludge process and a first-order decay coefficient for AOX removal. Data for model development were acquired by frequent collection of influent and effluent samples at a bleach kraft mill during a bleach plant shutdown and startup sequence.

scholarly journals A Comparative Study on Fault Detection Methods for Gas Turbine Combustion Systems

Energies ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 389
Author(s):  
Jinfu Liu ◽  
Zhenhua Long ◽  
Mingliang Bai ◽  
Linhai Zhu ◽  
Daren Yu
Keyword(s):  
Fault Detection ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Operating Conditions ◽  
Detection Methods ◽  
Distribution Model ◽  
Outlet Temperature ◽  
Combustion System ◽  
Comparison Results ◽  
Gas Turbine Combustion

As one of the core components of gas turbines, the combustion system operates in a high-temperature and high-pressure adverse environment, which makes it extremely prone to faults and catastrophic accidents. Therefore, it is necessary to monitor the combustion system to detect in a timely way whether its performance has deteriorated, to improve the safety and economy of gas turbine operation. However, the combustor outlet temperature is so high that conventional sensors cannot work in such a harsh environment for a long time. In practical application, temperature thermocouples distributed at the turbine outlet are used to monitor the exhaust gas temperature (EGT) to indirectly monitor the performance of the combustion system, but, the EGT is not only affected by faults but also influenced by many interference factors, such as ambient conditions, operating conditions, rotation and mixing of uneven hot gas, performance degradation of compressor, etc., which will reduce the sensitivity and reliability of fault detection. For this reason, many scholars have devoted themselves to the research of combustion system fault detection and proposed many excellent methods. However, few studies have compared these methods. This paper will introduce the main methods of combustion system fault detection and select current mainstream methods for analysis. And a circumferential temperature distribution model of gas turbine is established to simulate the EGT profile when a fault is coupled with interference factors, then use the simulation data to compare the detection results of selected methods. Besides, the comparison results are verified by the actual operation data of a gas turbine. Finally, through comparative research and mechanism analysis, the study points out a more suitable method for gas turbine combustion system fault detection and proposes possible development directions.

Chemical Reactor Network Application to Emissions Prediction for Industial DLE Gas Turbine

2006 ◽  
Author(s):  
I. V. Novosselov ◽  
P. C. Malte ◽  
S. Yuan ◽  
R. Srinivasan ◽  
J. C. Y. Lee
Keyword(s):  
Gas Turbine ◽  
Chemical Reactor ◽  
Kinetic Mechanism ◽  
Chemical Kinetic ◽  
Operating Conditions ◽  
Reacting Flow ◽  
Ongoing Research ◽  
Chemical Reactor Network ◽  
Reaction Zones ◽  
Reactor Network

A chemical reactor network (CRN) is developed and applied to a dry low emissions (DLE) industrial gas turbine combustor with the purpose of predicting exhaust emissions. The development of the CRN model is guided by reacting flow computational fluid dynamics (CFD) using the University of Washington (UW) eight-step global mechanism. The network consists of 31 chemical reactor elements representing the different flow and reaction zones of the combustor. The CRN is exercised for full load operating conditions with variable pilot flows ranging from 35% to 200% of the neutral pilot. The NOpilot. The NOx and the CO emissions are predicted using the full GRI 3.0 chemical kinetic mechanism in the CRN. The CRN results closely match the actual engine test rig emissions output. Additional work is ongoing and the results from this ongoing research will be presented in future publications.

Numerical Simulation of Gas Flow and Heat Transfer in Cross-Wavy Primary Surface Channel for Microtubine Recuperators

2005 ◽  
Author(s):  
H. X. Liang ◽  
Q. W. Wang ◽  
L. Q. Luo ◽  
Z. P. Feng
Keyword(s):  
Heat Transfer ◽  
Numerical Simulation ◽  
Gas Turbine ◽  
Numerical Study ◽  
High Reliability ◽  
Three Dimensional ◽  
Operating Conditions ◽  
Flow And Heat Transfer ◽  
High Heat Transfer ◽  
The Cross

Three-dimensional numerical simulation was conducted to investigate the flow field and heat transfer performance of the Cross-Wavy Primary Surface (CWPS) recuperators for microturbines. Using high-effective compact recuperators to achieve high thermal efficiency is one of the key techniques in the development of microturbine in recent years. Recuperators need to have minimum volume and weight, high reliability and durability. Most important of all, they need to have high thermal-effectiveness and low pressure-losses so that the gas turbine system can achieve high thermal performances. These requirements have attracted some research efforts in designing and implementing low-cost and compact recuperators for gas turbine engines recently. One of the promising techniques to achieve this goal is the so-called primary surface channels with small hydraulic dimensions. In this paper, we conducted a three-dimensional numerical study of flow and heat transfer for the Cross-Wavy Primary Surface (CWPS) channels with two different geometries. In the CWPS configurations the secondary flow is created by means of curved and interrupted surfaces, which may disturb the thermal boundary layers and thus improve the thermal performances of the channels. To facilitate comparison, we chose the identical hydraulic diameters for the above four CWPS channels. Since our experiments on real recuperators showed that the Reynolds number ranges from 150 to 500 under the operating conditions, we implemented all the simulations under laminar flow situations. By analyzing the correlations of Nusselt numbers and friction factors vs. Reynolds numbers of the four CWPS channels, we found that the CWPS channels have superior and comprehensive thermal performance with high compactness, i.e., high heat transfer area to volume ratio, indicating excellent commercialized application in the compact recuperators.

Sign in / Sign up

Export Citation Format

Share Document