Copper Complexes with the Ligand [Cp2MoH2]

1999 ◽  
Vol 54 (3) ◽  
pp. 337-340 ◽  
Author(s):  
Henri Brunner ◽  
Manfred Muschiol ◽  
Thomas Neuhierl ◽  
Bernhard Nuber
Keyword(s):  
Aqueous Solution ◽  
Structure Analysis ◽  
Copper Complexes ◽  
Chloride Ion ◽  
Molar Ratio ◽  
Fourier Methods ◽  
Polymeric Structure ◽  
X Ray ◽  
Difference Fourier ◽  
Hydride Ligands

The reaction of CuCl with [CP2MoH2] yields the complex [Cu(Cp2MoH2)2Cl]. An X-ray structure analysis shows that the coordination of the copper(I) ion by two [CP2MoH2] ligands and the chloride ion is pseudo-trigonal planar. The hydride ligands were located by using difference Fourier methods. A manifold of reactions took place when an aqueous solution of CUSO4 was treated with a solution of [Cp2MoH2] in dichloromethane in a 1:2 molar ratio. The X-ray structure analysis established a polymeric structure of the complex [Cu(Cp2MoH2)2Cu(Cp2MoH2)SO4]n with two different copper centers.

scholarly journals Synthese und Struktur diastereomerer, zweikerniger Kupferkomplexe [1] / Synthesis and Structure of Diastereomerie Dinuclear Copper Complexes [1]

1994 ◽  
Vol 49 (10) ◽  
pp. 1410-1414 ◽  
Author(s):  
Rolf W. Saalfrank ◽  
Oliver Struck ◽  
Karl Peters ◽  
Hans Georg von Schnering
Keyword(s):  
Structure Analysis ◽  
Copper Complexes ◽  
Molar Ratio ◽  
Dinuclear Copper ◽  
X Ray ◽  
Dark Green ◽  
2D Polymer ◽  
Light Green

Abstract Depolymerisation of a copper(II)/pyrrolidine-based 2D -polymer 2 by 4,4′-bipyridyl [molar ratio: 2 (CuL2) : 1 (Bipy)] and recrystallisation of the reaction product leads to two visually distinguishable crystal charges, composed of dark green octahedra meso-4 and light green rod-shaped crystals racem-5. Separation of the conglomerate of the morphologically different crystals is accomplished by pick out. The structure of the dinuelear complex racem-5 has been established unambigously by X-ray structure analysis. EPR and susceptibility measurements of mixtures of complex meso-4 and racem-5 indicate that there is no interaction be­tween the two copper(II) centres.

Adsorption of Chloride Anion from Aqueous Solution by Calcined (Mg-Al) Hydrotalcites of Different Mg/Al Ratio

2011 ◽  
Vol 233-235 ◽  
pp. 420-426 ◽  
Author(s):  
Dong Jin Wan ◽  
Dan Qu ◽  
Hua Xiao ◽  
Yong De Liu ◽  
Ting Lu ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Adsorption Capacity ◽  
Chloride Ion ◽  
Interlayer Spacing ◽  
Precipitation Method ◽  
Molar Ratio ◽  
Maximum Adsorption Capacity ◽  
Batch Mode ◽  
X Ray ◽  
Electric Charge Density

Hydrotalcites (HT-X) of different Mg/Al ratio (X is Mg/Al molar ratio, 3 and 4) was synthesized by co-precipitation method. Calcined HTLCs (CHT-X) at 500°C have been shown to recover their original layered structure by taking up chloride ion from aqueous solution. Adsorption of chloride by CHT-X was investigated in batch mode. The kinetics study showed that the pseudo-second-order kinetics model could be used to describe the adsorption process satisfactorily. The equilibrium isotherm showed that the Langmuir model gave a better fit to the experimental data than the Freundlich model. The maximum adsorption capacity of CHT-3 was 83.33 mg/g; CHT-4 was 90.09 mg/g .The samples of different Mg/Al ratio have different crystallite size, thus showing different adsorption capacity. As the Mg/Al ratio increases from 3 to 4; the electric charge density between the layers becomes weaker; the interlayer spacing increases; the sample shows greater adsorption capacity. The HT-X where characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), electron dispersive X-ray analysis (EDX).

Die Röntgenstrukturanalyse von (CO)9Co3CΟΒΒr2Ν(C5)3. X-ray Structure Analysis of (CO)9Co3COBBr2N(C2H5)3

1976 ◽  
Vol 31 (3) ◽  
pp. 342-344 ◽  
Author(s):  
Volker Bätzel
Keyword(s):  
Least Squares ◽  
Structure Analysis ◽  
Reliability Index ◽  
Three Dimensional ◽  
Diagonal Matrix ◽  
Crystal Data ◽  
Block Diagonal Matrix ◽  
Fourier Methods ◽  
Space Group ◽  
X Ray

Using three dimensional X-ray data collected on a four circle diffractometer, the structure of (CO)9Co3COBBr2N(C2H5)3 was solved by Patterson and Fourier methods. Least squares refinement with a block-diagonal matrix leads to a reliability index of R = 10.7%. Crystal data: α = 13.277(6) Å, b = 10.17(1) Å, c = 9.22(2) Å; α = 91.12(6)°, β = 87.61(4)°, γ = 98.79(2)°; space group P1̅; Z = 2; V = 1229,7 Å3; Dx = 1.97 gcm-3.

Die Kristallstruktur von Kalium-bis(hexamethylentetramin)-tris-(isothiocyanato)cuprat(II)-dihydrat, K[Cu(C6H12N4)2(NCS)3] · 2 H2O, einem trigonal-bipyramidalen Kupfer(II) -Komplex / The Crystal Structure of Potassium-bis(hexamethylenetetramine)-tris-(isothiocyanato) cuprate(II )-dihydrate, K[Cu(C6H12N4)2(NCS)3] · 2 H2O, a Trigonal Bipyramidal Cupric Complex

1981 ◽  
Vol 36 (5) ◽  
pp. 649-650 ◽  
Author(s):  
Joachim Pickardt
Keyword(s):  
Crystal Structure ◽  
Aqueous Solution ◽  
Structure Analysis ◽  
Title Compound ◽  
X Ray ◽  
Trigonal Bipyramidal Geometry ◽  
Trigonal Bipyramidal ◽  
Cupric Acetate

From an aqueous solution of cupric acetate containing an excess of KSCN and hexamethy- lenetetramine crystals of the title compound could be obtained. An X-ray structure analysis showed that the cuprate(II) anion has trigonal bipyramidal geometry. The three equatorial positions are occupied by NCS groups, the axial positions by the hexamethylenetetramine molecules

Synthesis, Characterization and Photocatalytic Activity of Nb-Doped TiO2 Nanoparticles

2012 ◽  
Vol 455-456 ◽  
pp. 110-114 ◽  
Author(s):  
Xuan Dong Li ◽  
Xi Jiang Han ◽  
Wen Ying Wang ◽  
Xiao Hong Liu ◽  
Yan Wang ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Photocatalytic Activity ◽  
Methyl Orange ◽  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Molar Ratio ◽  
X Ray Diffraction ◽  
Doped Tio2 ◽  
X Ray ◽  
Vis Spectroscopy

Nb-doped TiO2 powders with different concentrations of Nb have been synthesized by a sol-gel method and characterized by a series of technologies including X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and UV-vis spectroscopy. The photocatalytic activity of Nb-doped TiO2 is evaluated by degradation efficiency of methyl orange in aqueous solution. The results indicate that the photocatalytic activity of Nb-doped TiO2 synthesized with a Nb/Ti molar ratio of 5% is higher than that of TiO2 under the visible light.

Morphology Controllable Preparation of Gold Nanoplates through an Eco-Friendly Wet-Chemical Route

2014 ◽  
Vol 887-888 ◽  
pp. 108-111
Author(s):  
Zao Yi ◽  
Jiang Shan Luo ◽  
Xi Bo Li ◽  
Yong Yi ◽  
Xi Bin Xu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Aqueous Solution ◽  
Photoelectron Spectroscopy ◽  
Molar Ratio ◽  
Chemical Route ◽  
X Ray ◽  
Transmission Electron ◽  
Wet Chemical ◽  
Wet Chemical Route ◽  
Controllable Preparation

In this paper a simple eco-friendly wet-chemical way was mentioned to synthesize gold nanoplates. The prepared of the gold nanoplates was a seedless process that carried out by mixing HAuCl4 aqueous solution and Tannic acid (TA) solution at room temperature without the other surfactant and capping agents. The scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS) have been used to characterize the shape and composition the prepared gold nanoplates. The molar ratio of HAuCl4 and TA can control the shape and the size of gold nanoplates effectively. This research can provide a simple and eco-friendly way for the prepared gold nanoplates in aqueous solution.

Photoluminescent Characteristics of ZnS Quantum Dots Synthesized in Non-Aqueous-Phase

2013 ◽  
Vol 750-752 ◽  
pp. 991-994
Author(s):  
Jing Liu ◽  
Ming Ying ◽  
Yu Ling Tan ◽  
Bo Xi
Keyword(s):  
Aqueous Solution ◽  
Quantum Dots ◽  
Quantum Yield ◽  
Reaction Medium ◽  
Emission Spectra ◽  
Molar Ratio ◽  
X Ray Diffraction ◽  
Zinc Blend ◽  
Red Emission ◽  
X Ray

ZnS quantum dots (ZnS QDs) synthesized in aqueous solution is easy to gather a mass, which always results in low quantum yield. So, in this study benzene was used as reaction medium in which ZnS QDs with different hues were synthesized, and the hues of ZnS QDs were depend on the molar ratio of Zn (CH3COO)2 and Na2S·9H2O. The results show the emission spectra of ZnS QDs shifts with the change of the precursor molar ratio but the absorption peak at 310nm is not. The emission peaks centered at 430nm and 580nm at higher molar ratio [Zn2+]/[S2-] with blue-violet emitting phosphors; but, ZnS QDs synthesized at higher molar ratio [S2-]/[Zn2+] have orange-red emission at 580nm only. The X-ray diffraction analysis shows the crystallinity of ZnS QDs is better at [Zn2+]/[S2-]=1:10, which are typical zinc blend with nanorod structure.

scholarly journals Removal of Lead from Aqueous Solution by Adsorption using Magnesium Aluminium Hydrogenphosphate Layered Double Hydroxides

2014 ◽  
Vol 8 (1) ◽  
Author(s):  
Zaini Hamzah ◽  
Mohd Najif Ab Rahman ◽  
Yamin Yasin ◽  
Siti Mariam Sumari ◽  
Ahmad Saat
Keyword(s):  
Aqueous Solution ◽  
Layered Double Hydroxide ◽  
Molar Ratio ◽  
Maximum Adsorption Capacity ◽  
Lead Removal ◽  
X Ray Diffraction ◽  
X Ray ◽  
Co Precipitation ◽  
Double Hydroxide ◽  
Double Hydroxides

Layered double hydroxide with molar ratio of 4 (MAN 4) was synthesized by co-precipitation and followed by hydrothermal method. The compound was then later going through ion exchange with K2HPO4 for 48 hours to produce MgAlHPO4 (MAHP 4). The solid produced were characterized using X-ray diffraction (XRD) and Fourier Transform Infrared spectroscopy (FTIR). Adsorption of lead solution by MAHP 4 was carried out using batch experiment by mixing the lead solution and the solid of layered double hydroxide. The effects of various parameters such as contact time, pH, adsorbent dosage and initial concentration were investigated. The optimum pH for lead removal was found to be at pH of 5 and the optimum time of lead removal was found at 2 hours. The isotherm data was analysed using Langmuir and the correlation coefficient of 0.998 was obtained. The maximum adsorption capacity, Qo (mg/g) of 500 mg/g was also recorded from the Langmuir isotherm. The remaining lead solution was determined by using EDXRF (Energy Dispersive X-Ray Fluorescence spectrometry) model MiniPal 4 (PAN analytical). The results in this study indicate that MAHP 4 was an interesting adsorbent for removing lead from aqueous solution.

Sign in / Sign up

Export Citation Format

Share Document