New method of Arc suppression coil control - increased reliability of power supply in compensated distribution networks

2020 ◽  
Vol 1 (10) ◽  
pp. 16-17
Author(s):  
Petr Vančata
Keyword(s):  
Power Supply ◽  
Distribution Networks ◽  
New Method ◽  
Arc Suppression Coil

Study on Selective Leakage Protection System of Mine High Voltage Grid Based on Harmonic Phase Comparison

2015 ◽  
Vol 9 (1) ◽  
pp. 253-262
Author(s):  
Liu Zhongfu ◽  
Zhang Junxing ◽  
Shi Lixin ◽  
Yang Yaning
Keyword(s):  
High Voltage ◽  
Power Supply ◽  
Power Supply System ◽  
Supply System ◽  
Neutral Point ◽  
Arc Suppression Coil ◽  
Zero Sequence ◽  
Harmonic Extraction ◽  
Power Direction ◽  
The Stability

As for the wide application of arc suppression coil to the grounding in neutral point of mine high voltage grid, grid leakage fault rules and harmonic characteristics of the neutral point grounding system through arc suppression coil are analyzed, the selective leakage protection program “zero-sequence voltage starts, fifth harmonics of grid zerosequence voltage and zero-sequence current are extracted for phase comparison” is proposed, and corresponding fifth harmonic extraction circuit and power direction discrimination circuit are designed. The experimental results show that the protective principle applies not only to the neutral point insulated power supply system, but also to the power supply system in which neutral point passes arc suppression coil, which can solve selective leakage protection problems under different neutral grounding ways, improving the reliability of selective leakage and guaranteeing the stability of the action value.

scholarly journals Microgrid as a Cost-Effective Alternative to Rural Network Underground Cabling for Adequate Reliability

Energies ◽  
2018 ◽  
Vol 11 (8) ◽  
pp. 1978 ◽  
Author(s):  
Sanna Uski ◽  
Erkka Rinne ◽  
Janne Sarsama
Keyword(s):  
Case Studies ◽  
Power Supply ◽  
Dairy Farm ◽  
Cost Effective ◽  
Distribution Networks ◽  
Comparison Method ◽  
Economic Benefits ◽  
Economic Feasibility ◽  
Cost Calculation ◽  
Islanded Operation

Microgrids can be used for securing the supply of power during network outages. Underground cabling of distribution networks is another effective but conventional and expensive alternative to enhance the reliability of the power supply. This paper first presents an analysis method for the determination of microgrid power supply adequacy during islanded operation and, second, presents a comparison method for the overall cost calculation of microgrids versus underground cabling. The microgrid power adequacy during a rather long network outage is required in order to indicate high level of reliability of the supply. The overall cost calculation considers the economic benefits and costs incurred, combined for both the distribution network company and the consumer. Whereas the microgrid setup determines the islanded-operation power adequacy and thus the reliability of the supply, the economic feasibility results from the normal operations and services. The methods are illustrated by two typical, and even critical, case studies in rural distribution networks: an electric-heated detached house and a dairy farm. These case studies show that even in the case of a single consumer, a microgrid option could be more economical than network renovation by underground cabling of a branch in order to increase the reliability.

Influence of distributed power supply in distributed power distribution network

2021 ◽  
pp. 1-8
Author(s):  
Xin Shen ◽  
Hongchun Shu ◽  
Min Cao ◽  
Nan Pan ◽  
Junbin Qian
Keyword(s):  
Power Supply ◽  
Power Distribution ◽  
Short Circuit ◽  
Power Grid ◽  
Distribution Network ◽  
Distribution Networks ◽  
Power Supplies ◽  
Power Distribution Network ◽  
Power Sources ◽  
Distributed Power

In distribution networks with distributed power supplies, distributed power supplies can also be used as backup power sources to support the grid. If a distribution network contains multiple distributed power sources, the distribution network becomes a complex power grid with multiple power supplies. When a short-circuit fault occurs at a certain point on the power distribution network, the size, direction and duration of the short-circuit current are no longer single due to the existence of distributed power, and will vary with the location and capacity of the distributed power supply system. The change, in turn, affects the current in the grid, resulting in the generation and propagation of additional current. This power grid of power electronics will cause problems such as excessive standard mis-operation, abnormal heating of the converter and component burnout, and communication system failure. It is of great and practical significance to study the influence of distributed power in distributed power distribution networks.

scholarly journals Features of calculations of consequences of failures of power supply in distribution networks with the monoconsumer of electric energy

2020 ◽  
Vol 22 (2) ◽  
pp. 43-50
Author(s):  
Y. A. Sekretarev ◽  
D. A. Menyaikin
Keyword(s):  
Power Supply ◽  
Electric Energy ◽  
Distribution Networks ◽  
Operating Conditions ◽  
Electric Networks ◽  
Use Of Data ◽  
Information Classification ◽  
Specific Scheme ◽  
Transmission And Distribution

Reliability of power supply of consumers is an important task in the process of transmission and distribution of electric energy. The paper proposes a method for assessing the consequences of power failures of monoconsumers of electric energy on the example of an oil company and an adjacent power grid company. The uniqueness of the developed technique lies in the possibility of reliable calculation of reliability of power supply of complex branched electric networks without taking into account the specific scheme of power supply. The accuracy of calculations is increased due to the use of data directly studied power system, taking into account the specifics and operating conditions of specific equipment, instead of the average information. Classification of failures on the main reasons in electric networks of the oilproducing enterprise of the far North that allowed to develop actions for increase of level of reliability of power supply is made.

scholarly journals Research and Application of a Clear Diamond-Shaped Distribution Network Structure

2021 ◽  
Vol 9 ◽  
Author(s):  
Liu Shengli ◽  
Wu Jun ◽  
Xue Longjiang ◽  
Wu Di ◽  
Lu Haiqing ◽  
...  
Keyword(s):  
Network Structure ◽  
Power Supply ◽  
Distribution Network ◽  
Regional Distribution ◽  
Distribution Networks ◽  
Ring Network ◽  
Medium Voltage ◽  
Double Ring ◽  
Diamond Type ◽  
Supply Reliability

Aiming at the problems of low power supply reliability, poor transfer capacity between stations, and low line utilization in the current distribution network, this paper proposes a diamond-shaped distribution network structure with a clear structure. First, we investigated the typical wiring patterns of medium-voltage distribution networks in Tokyo, Japan, Paris, France, and China’s developed cities, and summarized experience and shortcomings. Secondly, combining the typical wiring patterns of distribution networks in China and abroad, construct a diamond-shaped distribution network structure, and study its adaptability, safety and flexibility, power supply reliability, and economy. Finally, take the transformation of the wiring mode of a regional distribution network in a certain city as an example, compare the use of the diamond-shaped distribution network structure in this article with the use of cable double-ring network wiring, cable “double petal” wiring, and Shanghai diamond-type wiring distribution network grid reconstruction The effect verifies the superiority of the diamond-shaped distribution network structure in this paper.

Analysis of Regulatory Documents on the Creation and Operation of Intelligent Power Supply Systems for Rural Consumers

2021 ◽  
Vol 1 (42) ◽  
pp. 8-15
Author(s):  
Aleksandr Vinogradov ◽  
◽  
Anatoliy Seyfullin
Keyword(s):  
Power System ◽  
Electric Power ◽  
Electricity Markets ◽  
Power Supply ◽  
Electric Power Industry ◽  
Distribution Networks ◽  
Power Industry ◽  
Regulatory Documents ◽  
Rural Consumers ◽  
Supply Systems

The construction of intelligent power supply systems for rural consumers (microgrids) is a promising concept for the development of the energy infrastructure of agricultural facilities. In the process of designing and operating micro-networks, a large number of technical, organizational and legal issues arise, the correct answer to which affects on the reliability, quality and efficiency of electricity supply to agricultural facilities. The analysis of the documentation regulating these processes is of particular relevance. (Research purpose) The research purpose is in analyzing the documentation regulating the construction and operation of intelligent power supply microgrid systems for rural consumers. (Materials and methods) The article reviews regulatory documents in the field of regulation of the electric power industry, distributed generation facilities, renewable energy sources, and the functioning of retail electricity markets. Authors used the method of system analysis, methods of comparisons and analogies, and expert assessments. (Results and discussion) The article presents the issues of functioning of micro-networks of rural consumers as part of the power system, in retail electricity markets; implementation of technological connection and integration of micro- networks into distribution networks. Authors evaluated the regulatory and technical documents regulating the general technical requirements for the design and operation of micro-networks. Domestic and foreign standards for the connection and parallel operation of micro-networks with distribution networks as part of the power system and special documents on micro-networks has been studied. (Conclusions) The article proposes measures for the development of GOST R based on the European IEC TS 62898-1 «Microgrids», harmonized with the requirements of Russian standards, taking into account the features of the Russian electric power industry and agriculture. The article notes the need to make changes to the Russian network codes to ensure the integration of rural micro-networks. The measures of state support aimed at stimulating the spread of intelligent power supply systems for rural consumers were cited.

Development and research of a genetic method for the analysis and determination of the location of power grid objects

2020 ◽  
Vol 25 (1) ◽  
pp. 20-42
Author(s):  
Fedorchenko I. ◽  
◽  
Oliinyk A. ◽  
Korniienko S. ◽  
Kharchenko A. ◽  
...  
Keyword(s):  
Power Supply ◽  
Narrow Range ◽  
Search Space ◽  
Distribution Networks ◽  
Power Supplies ◽  
Search Process ◽  
Stable Convergence ◽  
Genetic Method

The problem of combinatorial optimization is considered in relation to the choice of the location of the location of power supplies when solving the problem of the development of urban distribution networks of power supply. Two methods have been developed for placing power supplies and assigning consumers to them to solve this problem. The first developed method consists in placing power supplies of the same standard sizes, and the second - of different standard sizes. The fundamental difference between the created methods and the existing ones is that the proposed methods take into account all the material of the problem and have specialized methods for coding possible solutions, modified operators of crossing and selection. The proposed methods effectively solve the problem of low inheritance, topological unfeasibility of the found solutions, as a result of which the execution time is significantly reduced and the accuracy of calculations is increased. In the developed methods, the lack of taking into account the restrictions on the placement of new power supplies is realized, which made it possible to solve the problem of applying the methods for a narrow range of problems. A comparative analysis of the results obtained by placing power supplies of the same standard sizes and known methods was carried out, and it was found that the developed method works faster than the known methods. It is shown that the proposed approach ensures stable convergence of the search process by an acceptable number of steps without artificial limitation of the search space and the use of additional expert information on the feasibility of possible solutions. The results obtained allow us to propose effective methods to improve the quality of decisions made on the choice of the location of power supply facilities in the design of urban electrical.

scholarly journals Method for determining the maximum load of consumers in city power supply systems

2019 ◽  
Vol 139 ◽  
pp. 01078 ◽  
Author(s):  
A.G. Saidkhodjaev ◽  
A.M. Najimova ◽  
A.K. Bijanov
Keyword(s):  
Power Supply ◽  
Maximum Load ◽  
High Accuracy ◽  
New Method ◽  
Electrical Networks ◽  
Electric Networks ◽  
Reliable Determination ◽  
Supply Systems

In this article, we propose a new method for determining the maximum load of electric consumers in urban electric networks, which differs from existing methods in more accurate and reliable determination of the maximum loads. Based on the determination of the maximum loads of the objects of urban electrical networks, it is concluded that the proposed methods are determined by high accuracy and minor errors.

Sign in / Sign up

Export Citation Format

Share Document