Fourth Symposium on Fatigue and Fracture of Metallic Medical Materials and Devices

2019 ◽  
1967 ◽  
Vol 28 ◽  
pp. 105-176
Author(s):  
Robert F. Christy

(Ed. note: The custom in these Symposia has been to have a summary-introductory presentation which lasts about 1 to 1.5 hours, during which discussion from the floor is minor and usually directed at technical clarification. The remainder of the session is then devoted to discussion of the whole subject, oriented around the summary-introduction. The preceding session, I-A, at Nice, followed this pattern. Christy suggested that we might experiment in his presentation with a much more informal approach, allowing considerable discussion of the points raised in the summary-introduction during its presentation, with perhaps the entire morning spent in this way, reserving the afternoon session for discussion only. At Varenna, in the Fourth Symposium, several of the summaryintroductory papers presented from the astronomical viewpoint had been so full of concepts unfamiliar to a number of the aerodynamicists-physicists present, that a major part of the following discussion session had been devoted to simply clarifying concepts and then repeating a considerable amount of what had been summarized. So, always looking for alternatives which help to increase the understanding between the different disciplines by introducing clarification of concept as expeditiously as possible, we tried Christy's suggestion. Thus you will find the pattern of the following different from that in session I-A. I am much indebted to Christy for extensive collaboration in editing the resulting combined presentation and discussion. As always, however, I have taken upon myself the responsibility for the final editing, and so all shortcomings are on my head.)


2006 ◽  
Vol 503-504 ◽  
pp. 811-816 ◽  
Author(s):  
Alexei Vinogradov ◽  
Kazuo Kitagawa ◽  
V.I. Kopylov

Anisotropy of mechanical properties, fatigue and fracture resistance of precipitation hardened CuCrZr alloy ultrafine (UFG) grained by equal-channel angular pressing (ECAP) is in focus of the present communication. Fracture toughness was estimated in terms of J-integral and the fatigue crack growth rate was quantified. It was found that although the estimated JIC-value appeared lower than that reported in the literature for a reference alloy, the ductility, fracture and crack growth resistance remained satisfactory after ECAP while the tensile strength and fatigue limit improved considerably. The stable crack growth rate did not differ very much for ECAP and reference conventional CuCrZr and no remarkable anisotropy in the stable crack growth was noticed.


Author(s):  
Khangamlung Kamei ◽  
Muhammad A. Khan

AbstractFatigue damage is a concern in the engineering applications particularly for metal structures. The design phase of a structure considers factors that can prevent or delay the fatigue and fracture failures and increase its working life. This paper compiled some of the past efforts to share the modelling challenges. It provides an overview on the existing research complexities in the area of fatigue and fracture modelling. This paper reviews the previous research work under five prominent challenges: assessing fatigue damage accurately under the vibration-based loads, complications in fatigue and fracture life estimation, intricacy in fatigue crack propagation, quantification of cracks and stochastic response of structure under thermal environment. In the conclusion, the authors have suggested new directions of work that still require comprehensive research efforts to bridge the existing gap in the current academic domain due to the highlighted challenges.


Author(s):  
Yiğit Kazançoğlu ◽  
Muhittin Sağnak ◽  
Çisem Lafcı ◽  
Sunil Luthra ◽  
Anil Kumar ◽  
...  

Ever-changing conditions and emerging new challenges affect the ability of the healthcare sector to survive with the current system, and to maintain its processes effectively. In the healthcare sector, the conservation of the natural resources is being obstructed by insufficient infrastructure for managing residual waste resulting from single-use medical materials, increased energy use, and its environmental burden. In this context, circularity and sustainability concepts have become essential in healthcare to meliorate the sector’s negative impacts on the environment. The main aim of this study is to identify the barriers related to circular economy (CE) in the healthcare sector, apply big data analytics in healthcare, and provide solutions to these barriers. The contribution of this research is the detailed examination of the current healthcare literature about CE adaptation, and a proposal for a big data-enabled solutions framework to barriers to circularity, using fuzzy best-worst Method (BWM) and fuzzy VIKOR. Based on the findings, managerial, policy, and theoretical implementations are recommended to support sustainable development initiatives in the healthcare sector.


Sign in / Sign up

Export Citation Format

Share Document