The Effects of Radiation on Organic Matrix Waste Forms

Author(s):  
DC Phillips ◽  
DI Johnson ◽  
SG Burnay ◽  
JW Hitchon
1981 ◽  
Vol 11 ◽  
Author(s):  
J.W. Wald ◽  
P. Offemann

Radiation effects studies in both glass and glass ceramic nuclear waste forms have identified a rare-earth titanate phase of the general formula (RE) 2Ti207 which is capable of acting as a host phase for actinides.1,2 Ringwood and co-workers3 have also proposed a structurally similar phase, zirconolite (CaZrTi2 07), as one of the primary host phases in the SYNROC waste form. Data from these and other previous studies, as well as mineralogical information available on these titanate phases, have not provided an unambiguous interpretation of the effects of radiation damage relative to nuclear waste forms. This paper reports new laboratory data concerning radiation damage effects in both of these phases.


1988 ◽  
Vol 127 ◽  
Author(s):  
C. R. Wilding ◽  
D. C. Phillips ◽  
CE. Lyon

ABSTRACTThe effects of accelerated gamma and alpha irradiation experiments on cement grouts alone and grouts containing simulated combustible plutonium contaminated material (PCM) at a number of dose rates and under various environmental and confinement conditions are considered. Cracking and spallation can occur over a wide range of water/cement ratios at a high dose rate of 2.8 Gys-1 for grouts based on blast furnace slag compositions. Grouts based on pulverised fuel ash do not show any signs of spallationand cracking. One possible reason for this is the accumulation of radiolytic gases to high pressures in pores in the cement. It has been demonstrated that under some circumstances, at the Laboratory scale, PCM waste form can swell sufficiently to rupture its container and may disintegrate.


2017 ◽  
Vol 51 (3) ◽  
pp. 216-224 ◽  
Author(s):  
Wagner Gomes-Silva ◽  
Ana Carolina Prado-Ribeiro ◽  
Thaís Bianca Brandão ◽  
Karina Morais-Faria ◽  
Gilberto de Castro Junior ◽  
...  

Recent evidence suggests that head-and-neck radiotherapy (HNRT) increases active forms of matrix metalloproteinase-20 (MMP-20) in human tooth crowns, degrading the dentin-enamel junction (DEJ) and leading to enamel delamination, which is a pivotal step in the formation of radiation-related caries (RRC). Additional participation of enzymatic degradation of organic matrix components in caries progression was attributed to MMP-20 in dentin. Therefore, the current study tested the hypothesis that MMP-20 is overexpressed in the DEJ, dentin-pulp complex components, and carious dentin of post-HNRT patients, leading to detectable micromorphological changes to the enamel and dentin. Thirty-six teeth were studied, including 19 post-HNRT specimens and 17 nonirradiated controls. Optical light microscopy was used to investigate the micromorphological components of the DEJ, dentin-pulp complex components, and carious dentin. The samples were divided into 2 subgroups: nondemineralized ground sections (n = 20) and demineralized histological sections (n = 16). In addition, immunohistochemical analysis using the immunoperoxidase technique was conducted to semiquantitatively assess MMP-20 expression in the DEJ, dentin-pulp complex components, and carious dentin. No apparent damage to the DEJ microstructure or other dentin-pulp complex components was observed and no statistically significant differences were detected in MMP-20 expression (p > 0.05) between the irradiated and control groups. This study rejected the hypothesis that MMP-20 is overexpressed in the DEJ, dentin-pulp complex components, and carious dentin of post-HNRT patients, leading to detectable micromorphological changes. Hence, direct effects of radiation may not be regarded as an independent factor to explain aggressive clinical patterns of RRC.


Author(s):  
J. Langmore ◽  
M. Isaacson ◽  
J. Wall ◽  
A. V. Crewe

High resolution dark field microscopy is becoming an important tool for the investigation of unstained and specifically stained biological molecules. Of primary consideration to the microscopist is the interpretation of image Intensities and the effects of radiation damage to the specimen. Ignoring inelastic scattering, the image intensity is directly related to the collected elastic scattering cross section, σɳ, which is the product of the total elastic cross section, σ and the eficiency of the microscope system at imaging these electrons, η. The number of potentially bond damaging events resulting from the beam exposure required to reduce the effect of quantum noise in the image to a given level is proportional to 1/η. We wish to compare η in three dark field systems.


Author(s):  
D. C. Williams ◽  
D. E. Outka

Many studies have shown that the Golgi apparatus is involved in a variety of synthetic activities, and probably no Golgi product is more elaborate than the scales produced by various kinds of phytoflagellates. The formation of calcified scales (coccoliths, Fig. 1,2) of the coccolithophorid phytoflagellates provides a particularly interesting model system for the study of biological mineralization, and the sequential formation of Golgi products.The coccoliths of Hymenomonas carterae consist of a scale-like base (Fig. 2 and 4, b) with a highly structured calcified (CaCO3) rim composed of two distinct elements which alternate about the base periphery (Fig. 1 and 3, A, B). Each element is enveloped by a sheath-like organic matrix (Fig. 3; Fig. 4, m).


Author(s):  
T. J. Headley

Oxide phases having the hollandite structure have been identified in multiphase ceramic waste forms being developed for radioactive waste disposal. High resolution studies of phases in the waste forms described in Ref. [2] were initiated to examine them for fine scale structural differences compared to natural mineral analogs. Two hollandites were studied: a (Ba,Cs,K)-titan-ate with minor elements in solution that is produced in the waste forms, and a synthesized BaAl2Ti6O16 phase containing ∼ 4.7 wt% Cs2O. Both materials were consolidated by hot pressing at temperatures above 1100°C. Samples for high resolution microscopy were prepared both by ion-milling (7kV argon ions) and by crushing and dispersing the fragments on holey carbon substrates. The high resolution studies were performed in a JEM 200CX/SEG operating at 200kV.


Author(s):  
Kenneth H. Downing ◽  
Hu Meisheng ◽  
Hans-Rudolf Went ◽  
Michael A. O'Keefe

With current advances in electron microscope design, high resolution electron microscopy has become routine, and point resolutions of better than 2Å have been obtained in images of many inorganic crystals. Although this resolution is sufficient to resolve interatomic spacings, interpretation generally requires comparison of experimental images with calculations. Since the images are two-dimensional representations of projections of the full three-dimensional structure, information is invariably lost in the overlapping images of atoms at various heights. The technique of electron crystallography, in which information from several views of a crystal is combined, has been developed to obtain three-dimensional information on proteins. The resolution in images of proteins is severely limited by effects of radiation damage. In principle, atomic-resolution, 3D reconstructions should be obtainable from specimens that are resistant to damage. The most serious problem would appear to be in obtaining high-resolution images from areas that are thin enough that dynamical scattering effects can be ignored.


Author(s):  
Norman L. Dockum ◽  
John G. Dockum

Ultrastructural characteristics of fractured human enamel and acid-etched enamel were compared using acetate replicas shadowed with platinum and palladium. Shadowed replications of acid-etched surfaces were also obtained by the same method.Enamel from human teeth has a rod structure within which there are crystals of hydroxyapatite contained within a structureless organic matrix composed of keratin. The rods which run at right angles from the dentino-enamel junction are considered to run in a straight line perpendicular to the perimeter of the enamel, however, in many areas these enamel rods overlap, interlacing and intertwining with one another.


Author(s):  
Jun Liu ◽  
Katie E. Gunnison ◽  
Mehmet Sarikaya ◽  
Ilhan A. Aksay

The interfacial structure between the organic and inorganic phases in biological hard tissues plays an important role in controlling the growth and the mechanical properties of these materials. The objective of this work was to investigate these interfaces in nacre by transmission electron microscopy. The nacreous section of several different seashells -- abalone, pearl oyster, and nautilus -- were studied. Nacre is a laminated composite material consisting of CaCO3 platelets (constituting > 90 vol.% of the overall composite) separated by a thin organic matrix. Nacre is of interest to biomimetics because of its highly ordered structure and a good combination of mechanical properties. In this study, electron transparent thin sections were prepared by a low-temperature ion-beam milling procedure and by ultramicrotomy. To reveal structures in the organic layers as well as in the interfacial region, samples were further subjected to chemical fixation and labeling, or chemical etching. All experiments were performed with a Philips 430T TEM/STEM at 300 keV with a liquid Nitrogen sample holder.


Sign in / Sign up

Export Citation Format

Share Document