Effect of raster inclinations and part positions on mechanical properties, surface roughness and manufacturing price of printed parts produced by fused deposition method

2020 ◽  
Vol 14 (4) ◽  
pp. 7416-7423
Author(s):  
Mohammed Yunus ◽  
Mohammad S. Alsoufi
Keyword(s):  
Mechanical Properties ◽  
Surface Roughness ◽  
Surface Finish ◽  
Fused Deposition Modeling ◽  
Dimensional Accuracy ◽  
Acrylonitrile Butadiene Styrene ◽  
3D Cad ◽  
Fused Deposition ◽  
Cad Models ◽  
Proper Values

Additive manufacturing (AM) technology has the ability to produce parts or products using data from 3D CAD models based on adding material. Fused deposition modeling (FDM) is among the most popular AM technologies wherein the plastic materials like acrylonitrile-butadiene-styrene filaments get added in the form of semi-molten plastic layers from bottom to top to produce the final product. Besides, the merits of using the FDM process, it faces challenges related to strength, dimensional accuracy, surface finish, and so on. The mechanical, tribological, and surface finish of functional parts is an essential consideration in FDM. In this work, the role of process parameters such as the part positions and raster inclinations involved in the manufacturing of parts by FDM has been evaluated experimentally to obtain the desired properties for reducing production time, the quantity of supporting material, and overall cost including maintenance costs. The study revealed that part position is a more significant parameter than the raster inclinations on the surface roughness and mechanical properties of the FDM parts. It also concludes with the proper values of part positions and raster inclinations for achieving optimal mechanical properties, roughness, and manufacturing costs to withstand operating loading conditions.

Evaluation of FDM Pattern with ABS and PLA Material

2013 ◽  
Vol 465-466 ◽  
pp. 55-59 ◽  
Author(s):  
M.N. Hafsa ◽  
Mustaffa Ibrahim ◽  
Md. Saidin Wahab ◽  
M.S. Zahid
Keyword(s):  
Surface Roughness ◽  
Layer Thickness ◽  
Fused Deposition Modeling ◽  
Dimensional Accuracy ◽  
Acrylonitrile Butadiene Styrene ◽  
Casting Process ◽  
Fused Deposition ◽  
Before And After ◽  
High Layer ◽  
Better Than

Selection of the most suitable Rapid Prototyping (RP) and manufacturing process for a specific part creation is a difficult task due to the development of RP processes and materials. Most current RP processes can build with more than one type of material. The paper presents the evaluation on Acrylonitrile Butadiene Styrene (ABS) and Polylactic acid (PLA) part produced from Fused Deposition Modeling (FDM) as a master pattern for Investment Casting (IC) process. The main purpose of this research is to evaluate the dimensional accuracy and surface roughness for hollow and solid part of FDM pattern for IC process with different layer thickness. The value were taken for both before and after the casting process. Results show that model fabricated with hollow internal pattern structure (ABS material) that produced by low layer thickness is better than other models in terms of its dimensional accuracy (-0.19666mm) and surface roughness (1.41μm). Even though the ABS built part performed better as the model, the PLA build part produces better overall casting result. Final part fabricated with solid pattern (PLA material) that produced by high layer thickness is better than other final parts which its dimensional accuracy (-0.12777mm) and surface roughness (3.07μm).

Influence of Part Orientation on the Surface Roughness in the Process of Fused Deposition Modeling

2021 ◽  
Vol 896 ◽  
pp. 29-37
Author(s):  
Ján Milde ◽  
František Jurina ◽  
Jozef Peterka ◽  
Patrik Dobrovszký ◽  
Jakub Hrbál ◽  
...  
Keyword(s):  
Surface Roughness ◽  
3D Printing ◽  
Fused Deposition Modeling ◽  
Orientation Angle ◽  
Acrylonitrile Butadiene Styrene ◽  
Lower Surface ◽  
Geometrical Model ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Part Orientation

The article focused on the influence of part orientation on the surface roughness of cuboid parts during the process of fabricating by FDM technology. The components, in this case, is simple cuboid part with the dimensions 15 mm x 15mm x 30 mm. A geometrical model is defined that considers the shape of the material filaments after deposition, to define a theoretical roughness profile, for a certain print orientation angle. Five different print orientations in the X-axis of the cuboid part were set: 0°, 30°, 45°, 60°, and 90°. According to previous research in the field of FDM technology by the author, the internal structure (infill) was set at the value of 70%. The method of 3D printing was the Fused Deposition Modeling (FDM) and the material used in this research was thermoplastic ABS (Acrylonitrile butadiene styrene). For each setting, there were five specimens (twenty five prints in total). Prints were fabricated on a Zortrax M200 3D printer. After the 3D printing, the surface “A” was investigated by portable surface roughness tester Mitutoyo SJ-210. Surface roughness in the article is shown in the form of graphs (Fig.7). Results show increase in part roughness with increasing degree of part orientation. When the direction of applied layers on the measured surface was horizontal, significant improvement in surface roughness was observed. Findings in this paper can be taken into consideration when designing parts, as they can contribute in achieving lower surface roughness values.

Effect of process parameters on flexural strength and surface roughness in fused deposition modeling of PC-ABS material

2021 ◽  
pp. 251659842110311
Author(s):  
Shrikrishna Pawar ◽  
Dhananjay Dolas1
Keyword(s):  
Surface Roughness ◽  
Flexural Strength ◽  
Response Surface ◽  
Layer Thickness ◽  
Process Parameters ◽  
Surface Finish ◽  
Fused Deposition Modeling ◽  
Build Orientation ◽  
Fused Deposition ◽  
Deposition Modeling

Fused deposition modeling (FDM) is one of the most commonly used additive manufacturing (AM) technologies, which has found application in industries to meet the challenges of design modifications without significant cost increase and time delays. Process parameters largely affect the quality characteristics of AM parts, such as mechanical strength and surface finish. This article aims to optimize the parameters for enhancing flexural strength and surface finish of FDM parts. A total of 18 test specimens of polycarbonate (PC)-ABS (acrylonitrile–butadiene–styrene) material are printed to analyze the effect of process parameters, viz. layer thickness, build orientation, and infill density on flexural strength and surface finish. Empirical models relating process parameters with responses have been developed by using response surface regression and further analyzed by analysis of variance. Main effect plots and interaction plots are drawn to study the individual and combined effect of process parameters on output variables. Response surface methodology was employed to predict the results of flexural strength 48.2910 MPa and surface roughness 3.5826 µm with an optimal setting of parameters of 0.14-mm layer thickness and 100% infill density along with horizontal build orientation. Experimental results confirm infill density and build orientation as highly significant parameters for impacting flexural strength and surface roughness, respectively.

Dimensional accuracy of FDM-printed polymer parts

2019 ◽  
Vol 26 (2) ◽  
pp. 288-298 ◽  
Author(s):  
Oğuzhan Emre Akbaş ◽  
Onur Hıra ◽  
Sahar Zhiani Hervan ◽  
Shahrad Samankan ◽  
Atakan Altınkaynak
Keyword(s):  
Experimental Data ◽  
Numerical Model ◽  
Feed Rate ◽  
Fused Deposition Modeling ◽  
Dimensional Accuracy ◽  
Acrylonitrile Butadiene Styrene ◽  
Strip Width ◽  
Content Type ◽  
Fused Deposition ◽  
Nozzle Temperature

Purpose This paper aims to analyze experimentally and numerically the effect of the nozzle temperature and feed rates on the dimensions of the fused deposition modeling (FDM) polymer parts. Design/methodology/approach In total, 30 strips per sample were printed with the same width as the nozzle diameter. The strips were printed with one vertical movement of the nozzle head. The width of the strips was measured with a caliper at five locations. A linear regression model was created based on the experimental data to understand the correlation between the strip width deviation and the parameters of interest. Numerical simulations were performed to predict the swell of the polymer exiting the nozzle using finite element method combined with level set method. The experimental results were then used to validate the models. Findings The average accuracy of polylactic acid (PLA) samples was better than that of acrylonitrile butadiene styrene (ABS) samples. The average strip width had a tendency to increase with increasing temperature for PLA samples, whereas ABS samples showed mixed behavior. The strip width decreased with increasing feed rate for most cases. The measurement positions had a major effect on strip width when compared to nozzle temperature and feed rate. The numerical model predictions were in good agreement with the experimental data. A few discrepancies were observed at high feed rates and nozzle temperatures. Originality/value This study will contribute to gaps in knowledge regarding the effect of processing conditions on dimensional accuracy of FDM-printed parts. The developed numerical model can be efficiently used to predict the dimensional accuracy of FDM-printed parts.

Investigation of Recycled Acrylonitrile Butadiene Styrene for Additive Manufacturing

2020 ◽  
pp. 130-154
Author(s):  
Shajahan Bin Maidin ◽  
Zulkeflee Abdullah ◽  
Ting Kung Hieng
Keyword(s):  
Mechanical Properties ◽  
Test Specimen ◽  
Fused Deposition Modeling ◽  
Acrylonitrile Butadiene Styrene ◽  
Travel Speed ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Printing Processes ◽  
Butadiene Styrene

One of the disadvantages of fused deposition modeling (FDM) is waste produced during the printing processes. This investigation focuses on using 100% recycled Acrylonitrile Butadiene Styrene (ABS) for the FDM process. The recycling begins with re-granule the waste ABS material and produces it into a new filament. The new recycled filament was used to print the test specimen. Investigation on the mechanical properties and the surface quality of the test specimen and comparison with standard ABS specimen was done. The result shows that the recycled ABS can be produced into filament with 335°C of extrusion temperature and 1.5 mm/s travel speed of the extruder conveyor. The surface roughness of recycled specimen is 6.94% higher than the standard ABS specimen. For ultimate tensile strength, there is a small difference in X and Y orientation between the standard and the recycled ABS specimen which are 22.93% and 19.98%, respectively. However, in Z orientation, it is 52.33% lower. This investigation proves that ABS can be recycled without significantly affecting its mechanical properties.

A review of melt extrusion additive manufacturing processes: II. Materials, dimensional accuracy, and surface roughness

2015 ◽  
Vol 21 (3) ◽  
pp. 250-261 ◽  
Author(s):  
Brian N. Turner ◽  
Scott A Gold
Keyword(s):  
Surface Roughness ◽  
Additive Manufacturing ◽  
Product Design ◽  
Fused Deposition Modeling ◽  
Dimensional Accuracy ◽  
Design Parameters ◽  
Content Type ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Am Processes

Purpose – The purpose of this paper is to critically review the literature related to dimensional accuracy and surface roughness for fused deposition modeling and similar extrusion-based additive manufacturing or rapid prototyping processes. Design/methodology/approach – A systematic review of the literature was carried out by focusing on the relationship between process and product design parameters and the dimensional and surface properties of finished parts. Methods for evaluating these performance parameters are also reviewed. Findings – Fused deposition modeling® and related processes are the most widely used polymer rapid prototyping processes. For many applications, resolution, dimensional accuracy and surface roughness are among the most important properties in final parts. The influence of feedstock properties and system design on dimensional accuracy and resolution is reviewed. Thermal warping and shrinkage are often major sources of dimensional error in finished parts. This phenomenon is explored along with various approaches for evaluating dimensional accuracy. Product design parameters, in particular, slice height, strongly impact surface roughness. A geometric model for surface roughness is also reviewed. Originality/value – This represents the first review of extrusion AM processes focusing on dimensional accuracy and surface roughness. Understanding and improving relationships between materials, design parameters and the ultimate properties of finished parts will be key to improving extrusion AM processes and expanding their applications.

Evaluation of Direct Rapid Prototyping Pattern for Investment Casting

2012 ◽  
Vol 463-464 ◽  
pp. 226-233 ◽  
Author(s):  
M.F.M. Omar ◽  
S. Sharif ◽  
M. Ibrahim ◽  
H. Hehsan ◽  
M.N.M. Busari ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Rapid Prototyping ◽  
Investment Casting ◽  
Fused Deposition Modeling ◽  
Ceramic Powder ◽  
Dimensional Accuracy ◽  
Fused Deposition ◽  
Rp Process ◽  
Burn Out ◽  
Quality Assessments

The ability of rapid prototyping (RP) technology to fabricate direct part of any complex shape as a sacrificial pattern in shorter lead time has benefited the foundry industries significantly. The quality of investment casting (IC) parts is directly related to the master pattern fabricated from RP process. The main objective of this study was to evaluate the quality characteristics of various RP patterns that were fabricated by various RP processes which include 3D Printer (3DP), Fused Deposition Modeling (FDM) and Multijet Modeling (MJM). Evaluation of the RP patterns was carried out on dimensional accuracy, surface roughness and pattern shrinkage. Different internal pattern designs for the RP parts were developed using Insight software for FDM process and Solidworks 2011 for other RP systems. In addition to the quality assessments, the effect of the internal pattern designs on the burn out behaviour of the RP patterns was also evaluated. Experimental results showed that FDM and MJM produced patterns with better accuracy, surface roughness and part shrinkage when compared to 3DP. It was evident that the internal pattern structure improved the accuracy of the patterns produced from all RP processes. Results showed that FDM and MJM processes were superior in terms of mold cleanliness when no residual ash was observed during the burn out stage. Significant oxidation of ceramic powder was observed on the molds of the 3DP patterns which need to be removed manually from the molds.

Investigations for Wax Coated 3D Printed Hybrid Patterns for Partial Dentures

2019 ◽  
Author(s):  
Kamaljit Singh Boparai ◽  
Gurpartap Singh ◽  
Rupinder Singh ◽  
Sarabjit Singh
Keyword(s):  
Fused Deposition Modeling ◽  
Three Dimensional ◽  
Surface Hardness ◽  
Dimensional Accuracy ◽  
Acrylonitrile Butadiene Styrene ◽  
Processing Technique ◽  
Patient Specific ◽  
Fused Deposition ◽  
3D Printed

Abstract In this work, 3D printed master patterns of acrylonitrile butadiene styrene (ABS) thermoplastic material have been used for the preparation of Ni-Cr based functional prototypes as partial dentures (PD). The study started with patient specific three dimensional (3D), CAD data (fetched through scanning). This data was used for preparation of .STL file for printing of master patterns on fused deposition modeling (FDM) setup. The 3D printed master patterns were further wax coated to reduce the surface irregularities (as cost effective post processing technique). The hybrid patterns were subjected to investment casting for the preparation of Ni-Cr based PD. The finally prepared functional prototypes as PD were optimized for dimensional accuracy, surface finish and surface hardness as responses. The results are visualized and supported by photomicrographs and in-vitro analysis.

Sign in / Sign up

Export Citation Format

Share Document