scholarly journals Correlation effects in the ground state of Ni-(Co)-Mn-Sn Heusler compounds

MRS Advances ◽  
2019 ◽  
Vol 4 (08) ◽  
pp. 441-446 ◽  
Author(s):  
Bernardo Barbiellini ◽  
Aki Pulkkinen ◽  
Johannes Nokelainen ◽  
Vasiliy Buchelnikov ◽  
Vladimir Sokolovskiy ◽  
...  
Keyword(s):  
Density Functional ◽  
Density Functional Theory Calculations ◽  
Equilibrium Structure ◽  
Phase Correlation ◽  
Magnetic Interactions ◽  
Magnetic Impurities ◽  
Correlation Effects ◽  
Generalized Gradient ◽  
Co Doping

AbstractWe present density functional theory calculations to study the interplay between magnetic and structural properties in Ni-Co-Mn-Sn. The relative stability of austenite (cubic) and martensite (tetragonal) phases depends critically on the magnetic interactions between Mn atoms. While the standard generalized gradient approximation (GGA) stabilizes the latter phase, correlation effects beyond GGA tend to suppress this effect. Mn atoms treated as magnetic impurities can explain our results, where a delicate balance between magnetic interactions mediated by Ni d and Sn p orbitals determines the equilibrium structure of the crystal. Finally, we discuss the role of Co doping in stabilizing ferromagnetic austenite phases.

scholarly journals Role of Chemistry and Crystal Structure on the Electronic Defect States in Cs-Based Halide Perovskites

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 1032
Author(s):  
Anirban Naskar ◽  
Rabi Khanal ◽  
Samrat Choudhury
Keyword(s):  
Crystal Structure ◽  
Density Functional ◽  
Covalent Bond ◽  
Density Functional Theory Calculations ◽  
Antisite Defect ◽  
Defect States ◽  
Functional Theory ◽  
Electronic Defect ◽  
Constituent Elements

The electronic structure of a series perovskites ABX3 (A = Cs; B = Ca, Sr, and Ba; X = F, Cl, Br, and I) in the presence and absence of antisite defect XB were systematically investigated based on density-functional-theory calculations. Both cubic and orthorhombic perovskites were considered. It was observed that for certain perovskite compositions and crystal structure, presence of antisite point defect leads to the formation of electronic defect state(s) within the band gap. We showed that both the type of electronic defect states and their individual energy level location within the bandgap can be predicted based on easily available intrinsic properties of the constituent elements, such as the bond-dissociation energy of the B–X and X–X bond, the X–X covalent bond length, and the atomic size of halide (X) as well as structural characteristic such as B–X–B bond angle. Overall, this work provides a science-based generic principle to design the electronic states within the band structure in Cs-based perovskites in presence of point defects such as antisite defect.

On the role of steric and exchange–correlation effects in halogenated complexes

2021 ◽  
Author(s):  
Mojtaba Alipour ◽  
Parisa Fallahzadeh
Keyword(s):  
Density Functional Theory ◽  
Density Functional ◽  
Energy Partitioning ◽  
Correlation Effects ◽  
Functional Theory ◽  
Exchange Correlation

Density functional theory formalisms of energy partitioning schemes are utilized to find out what energetic components govern interactions in halogenated complexes.

scholarly journals DFT Studies of Graphene-Functionalised Derivatives of Capecitabine

2017 ◽  
Vol 72 (12) ◽  
pp. 1131-1138 ◽  
Author(s):  
Mehdi Aramideh ◽  
Mahmoud Mirzaei ◽  
Ghadamali Khodarahmi ◽  
Oğuz Gülseren
Keyword(s):  
Density Functional ◽  
Density Functional Theory Calculations ◽  
Atomic Scale ◽  
Phase System ◽  
Molecular Models ◽  
Functional Theory ◽  
Atomic Properties ◽  
Scale Properties ◽  
Derivatives Of

AbstractCancer is one of the major problems for so many people around the world; therefore, dedicating efforts to explore efficient therapeutic methodologies is very important for researchers of life sciences. In this case, nanostructures are expected to be carriers of medicinal compounds for targeted drug design and delivery purposes. Within this work, the graphene (Gr)-functionalised derivatives of capecitabine (CAP), as a representative anticancer, have been studied based on density functional theory calculations. Two different sizes of Gr molecular models have been used for the functionalisation of CAP counterparts, CAP-Gr3 and CAP-Gr5, to explore the effects of Gr-functionalisation on the original properties of CAP. All singular and functionalised molecular models have been optimised and the molecular and atomic scale properties have been evaluated for the optimised structures. Higher formation favourability has been obtained for CAP-Gr5 in comparison with CAP-Gr3 and better structural stability has been obtained in the water-solvated system than the isolated gas-phase system for all models. The CAP-Gr5 model could play a better role of electron transferring in comparison with the CAP-Gr3 model. As a concluding remark, the molecular properties of CAP changed from singular to functionalised models whereas the atomic properties remained almost unchanged, which is expected for a carrier not to use significant perturbations to the original properties of the carried counterpart.

First-Principles DFT Insights into the Mechanisms of CO2 Reduction to CO on Fe (100)-Ni Bimetals

2021 ◽  
Author(s):  
Caroline Kwawu ◽  
Albert Aniagyei ◽  
Destiny Konadu ◽  
Elliot Menkah ◽  
Richard Tia
Keyword(s):  
Carbon Monoxide ◽  
Binding Site ◽  
Active Sites ◽  
Density Functional ◽  
Co2 Reduction ◽  
Density Functional Theory Calculations ◽  
Hydrocarbon Fuel ◽  
Generalized Gradient ◽  
Efficient Catalyst ◽  
Stepped Surface

Abstract Iron and nickel are known active sites in the enzyme carbon monoxide dehydrogenases (CODH) which catalyzes CO2 to CO reversibly. The presence of nickel impurities in the earth abundant iron surface could provide a more efficient catalyst for CO2 degradation into CO, which is a feedstock for hydrocarbon fuel production. In the present study, we have employed spin-polarized dispersion-corrected density functional theory calculations within the generalized gradient approximation to elucidate the active sites on Fe (100)-Ni bimetals. We sort to ascertain the mechanism of CO2 dissociation to carbon monoxide on Ni deposited and alloyed surfaces at 0.25, 0.50 and 1 monolayer (ML) impurity concentrations. CO2 and (CO + O) bind exothermically i.e., -0.87 eV and − 1.51 eV respectively to the bare Fe (100) surface with a decomposition barrier of 0.53 eV. The presence of nickel generally lowers the amount of charge transferred to CO2 moiety. Generally, the binding strengths of CO2 were reduced on the modified surfaces and the extent of its activation was lowered. The barriers for CO2 dissociation increased mainly upon introduction of Ni impurities which is undesired. However, the 0.5 ML deposited (FeNi0.5(A)) surface is promising for CO2 decomposition, providing a lower energy barrier (of 0.32 eV) than the pristine Fe (100) surface. This active 1-dimensional defective FeNi0.5(A) surface provides a stepped surface and Ni-Ni bridge binding site for CO2 on Fe (100). Ni-Ni bridge site on Fe (100) is more effective for both CO2 binding or sequestration and dissociation compared to the stepped surface providing the Fe-Ni bridge binding site.

Theoretical Assessment of the Mechanical, Electronic, and Vibrational Properties of the Paramagnetic Insulating Cerium Dioxide and Investigation of Intrinsic Defects

2014 ◽  
pp. 431-446
Author(s):  
Mohammed Benali Kanoun ◽  
Souraya Goumri-Said
Keyword(s):  
Density Functional ◽  
Phonon Dispersion ◽  
Local Density ◽  
Elastic Stiffness ◽  
Magnetic Impurities ◽  
Generalized Gradient ◽  
Intrinsic Defects ◽  
Local Moments ◽  
Density Functional Perturbation Theory ◽  
Theoretical Assessment

First-principles calculations are performed by taking into account the strong correlation effects on ceria. To obtain an accurate description including f electrons, the authors optimized the Coulomb U parameter for use in Local-Density Approximation (LDA) and Generalized Gradient Approximation (GGA) calculation. A good agreement with experimental data is obtained within the GGA+U (Wu-Cohen scheme). Elastic stiffness constants are found in correct agreement with the available experimental results. Born effective charge, dielectric permittivity, and the phonon-dispersion curves are computed using density functional perturbation theory. The origin of magnetism in undoped ceria with intrinsic defects is investigated. The authors show that both of Ce and O vacancies induce local moments and ferromagnetism without doping ceria by magnetic impurities in this chapter.

scholarly journals Structural, Electronic, and Magnetic Properties of Mn4N Perovskite: Density Functional Theory Calculations and Monte Carlo Study

2019 ◽  
Vol 33 (5) ◽  
pp. 1507-1512 ◽  
Author(s):  
A. Azouaoui ◽  
M. El Haoua ◽  
S. Salmi ◽  
A. El Grini ◽  
N. Benzakour ◽  
...  
Keyword(s):  
Density Functional Theory ◽  
Monte Carlo ◽  
Magnetic Properties ◽  
Density Functional ◽  
Density Functional Theory Calculations ◽  
Generalized Gradient ◽  
Critical Temperatures ◽  
Metallic Behavior ◽  
Functional Theory ◽  
Electronic And Magnetic Properties

AbstractIn this paper, we have studied the structural, electronic, and magnetic properties of the cubic perovskite system Mn4N using the first principles calculations based on density functional theory (DFT) with the generalized gradient approximation (GGA). The obtained data from DFT calculations are used as input data in Monte Carlo simulation with a mixed spin-5/2 and 1 Ising model to calculate the magnetic properties of this compound, such as the total, partial thermal magnetization, and the critical temperatures (TC). The obtained results show that Mn4N has a ferrimagnetic structure with two different sites of Mn in the lattice and presents a metallic behavior. The obtained TC is in good agreement with experimental results.

POSSIBLE Si-BASED HALF-METALLIC MATERIALS: MnSi46 CLATHRATES

2012 ◽  
Vol 26 (18) ◽  
pp. 1250114
Author(s):  
ZHI-WEI ZHAO ◽  
JING WANG ◽  
HUI-YAN ZHAO ◽  
YING LIU
Keyword(s):  
Density Functional ◽  
Magnetic Moments ◽  
Density Functional Theory Calculations ◽  
Metallic Materials ◽  
Generalized Gradient ◽  
Functional Theory ◽  
Half Metallic ◽  
Silicon Clathrates ◽  
Ni Dopant ◽  
Center Site

The structural and magnetic properties of M Si 46 (M = Mn , Fe , Co and Ni ) clathrates have been studied using density functional theory calculations within the generalized gradient approximation. When the structures involve a dopant at the center of a Si 20 or Si 24 cage, the results show that the neighboring atoms around the dopant are drawn in toward the center. Some of the silicon clathrates with a Mn or Co dopant at the center site of a Si 20 cage, or a Mn , Fe or Ni dopant at the center site of a Si 24 cage are found to be half-metallic materials with large magnetic moments, and others with a Fe or Ni dopant at the center site of a Si 20 cage or a Co dopant at the center site of a Si 24 cage display semi-metallic characters. In particular, MnSi 46 with a half-metallic gap of 0.70 eV and a magnetic moment of 5.00 μ B shows promise for applications in the field of spintronics.

Half-metallic ferromagnetism in V-doped ZnTe semiconductor at reduced dopant concentration

2014 ◽  
Vol 28 (13) ◽  
pp. 1450104 ◽  
Author(s):  
M. Sajjad ◽  
H. X. Zhang ◽  
N. A. Noor ◽  
S. M. Alay-e-Abbas ◽  
M. Abid ◽  
...  
Keyword(s):  
Density Functional ◽  
Spin Exchange ◽  
Density Functional Theory Calculations ◽  
Orbital Method ◽  
Ferromagnetic Behavior ◽  
Full Potential ◽  
Local Spin Density Approximation ◽  
Generalized Gradient ◽  
Half Metallic ◽  
Bonding Properties

In this study, we examine the structural, electronic, magnetic and bonding properties of zincblende phase Zn 1-x V x Te (x = 0.0625, 0.125, 0.25) compounds to present them as suitable candidates for spintronic applications. Density functional theory calculations have been used by implementing the accurate full-potential linear-augmented-planewave plus local-orbital method. Structural properties have been computed using Wu–Cohen generalized gradient approximation, whereas the modified Becke and Johnson local (spin) density approximation (mBJLDA) function has been employed for the evaluating ground state electronic properties and ferromagnetic behavior. The half-metallic (HM) ferromagnetism in Zn 1-x V x Te is analyzed in terms of V -3d states and it is shown that mBJLDA predicts wide HM gaps which promise the possibility of achieving V -doped ZnTe with high Curie temperature. The spin exchange splittings Δx(d) and Δx(pd) have been estimated and the contribution of conduction band (CB) and valence band (VB) in exchange splitting is calculated in terms of the exchange constants N0α and N0β. Furthermore, spin-polarized charge density calculation is presented for elucidating the bonding nature, while pressure dependence of total magnetic moment for three concentrations of V -doped ZnTe is also discussed.

The Role of SiH3 Diffusion in Determining the Surface Smoothness of Plasma-Deposited Amorphous Si Thin Films: An Atomic-Scale Analysis

2005 ◽  
Vol 862 ◽  
Author(s):  
Mayur S. Valipa ◽  
Tamas Bakos ◽  
Eray S. Aydil ◽  
Dimitrios Maroudas
Keyword(s):  
Thin Films ◽  
Density Functional ◽  
Activation Barrier ◽  
Density Functional Theory Calculations ◽  
Atomic Scale ◽  
Functional Theory ◽  
Weak Adsorption ◽  
Dynamics Simulations ◽  
Hydrogenated Amorphous

AbstractDevice-quality hydrogenated amorphous silicon (a-Si:H) thin films grown under conditions where the SiH3 radical is the dominant deposition precursor are remarkably smooth, as the SiH3 radical is very mobile and fills surface valleys during its diffusion on the a-Si:H surface. In this paper, we analyze atomic-scale mechanisms of SiH3 diffusion on a-Si:H surfaces based on molecular-dynamics simulations of SiH3 radical impingement on surfaces of a-Si:H films. The computed average activation barrier for radical diffusion on a-Si:H is 0.16 eV. This low barrier is due to the weak adsorption of the radical onto the a-Si:H surface and its migration predominantly through overcoordination defects; this is consistent with our density functional theory calculations on crystalline Si surfaces. The diffusing SiH3 radical incorporates preferentially into valleys on the a-Si:H surface when it transfers an H atom and forms a Si-Si backbond, even in the absence of dangling bonds.

Graphene-Based Sensors for Monitoring Strain

2013 ◽  
Vol 3 (1) ◽  
pp. 74-83
Author(s):  
M. Mirnezhad ◽  
R. Ansari ◽  
H. Rouhi ◽  
M. Faghihnasiri
Keyword(s):  
Fermi Level ◽  
Band Gap ◽  
Strain Distribution ◽  
Density Functional ◽  
Tight Binding ◽  
Density Functional Theory Calculations ◽  
Generalized Gradient ◽  
Functional Theory ◽  
The Density Functional Theory ◽  
Gap Opening

The application of graphene as a nanosensor in measuring strain through its band structure around the Fermi level is investigated in this paper. The mechanical properties of graphene as well as its electronic structure are determined by using the density functional theory calculations within the framework of generalized gradient approximation. In the case of electronic properties, the simulations are applied for symmetrical and asymmetrical strain distributions in elastic range; also the tight-binding approach is implemented to verify the results. It is indicated that the energy band gap does not change with the symmetrical strain distribution but depend on the asymmetric strain distribution, increasing strain leads to band gap opening around the Fermi level.

Sign in / Sign up

Export Citation Format

Share Document