Hybrid processing and properties of Ni0.8Zn0.2Fe2O4/Ba0.6Sr0.4TiO3 magnetodielectric composites

2010 ◽  
Vol 25 (9) ◽  
pp. 1803-1811 ◽  
Author(s):  
Haibo Yang ◽  
Hong Wang ◽  
Li Shui ◽  
Li He
Keyword(s):  
Magnetic Properties ◽  
Dielectric Properties ◽  
Electromagnetic Interference ◽  
High Frequency ◽  
Processing Route ◽  
High Frequency Range ◽  
Frequency Range ◽  
Low Loss ◽  
High Permittivity ◽  
Interference Filters

Ni0.8Zn0.2Fe2O4/Ba0.6Sr0.4TiO3 (NZO/BST) composites with high permittivity and low loss were synthesized via the hybrid processing route. The composites possess very dense and homogenous microstructure. The NZO/BST composites show good dielectric properties and magnetic properties with low loss in high frequency range. This indicates that this kind of magnetodielectric composites can be used in high-frequency communications for the capacitor-inductor integrating devices such as electromagnetic interference filters and antennas. The permittivities of the composites were also fitted using the combination of Maxwell–Wagner polarization and modified Curie–Weiss law.

scholarly journals Low-loss Cd-substituted Mg ferrites with matching impedance for high-frequency-range antennas

2020 ◽  
Author(s):  
Gongwen Gan ◽  
Dainan Zhang ◽  
Jie Li ◽  
Gang Wang ◽  
Xin Huang ◽  
...  
Keyword(s):  
High Frequency ◽  
High Frequency Range ◽  
Frequency Range ◽  
Low Loss

Low-Loss Composite NiCuZnCo–BaTiO3 With Matched Permeability and Permittivity in High Frequency Range

2014 ◽  
Vol 50 (11) ◽  
pp. 1-4 ◽  
Author(s):  
Tianshui Zhang ◽  
Hua Su ◽  
Xiaoli Tang ◽  
Huaiwu Zhang ◽  
Yulan Jing ◽  
...  
Keyword(s):  
High Frequency ◽  
High Frequency Range ◽  
Frequency Range ◽  
Low Loss

scholarly journals Magneto-dielectric properties of doped ferrite based nanosized ceramics over very high frequency range

2016 ◽  
Vol 19 (2) ◽  
pp. 911-916 ◽  
Author(s):  
Ashish Saini ◽  
Pravendra Kumar ◽  
Blaise Ravelo ◽  
Sebastian Lallechere ◽  
Atul Thakur ◽  
...  
Keyword(s):  
Dielectric Properties ◽  
High Frequency ◽  
High Frequency Range ◽  
Frequency Range ◽  
Very High Frequency ◽  
Very High

SYNTHESIS OF Pb(Mg1/3Nb2/3)O3–PbTiO3 FILM ON Ti SUBSTRATES BY A SINGLE STEP AT LOW TEMPERATURE

2008 ◽  
Vol 15 (01n02) ◽  
pp. 23-27
Author(s):  
XIULI CHEN ◽  
HUIQING FAN
Keyword(s):  
Dielectric Properties ◽  
Low Temperature ◽  
High Frequency ◽  
Hydrothermal Process ◽  
Metal Substrate ◽  
Relaxor Ferroelectric ◽  
Single Step ◽  
High Frequency Range ◽  
Frequency Range ◽  
Pure Perovskite Structure

The relaxor ferroelectric Pb ( Mg 1/3 Nb 2/3) O 3– PbTiO 3 compositions are of interest owing to their excellent dielectric, electromechanical, electro-optical, and other properties. In this paper, the 0.80 Pb ( Mg 1/3 Nb 2/3) O 3–0.20 PbTiO 3 (PMN–PT 80/20) films with pure perovskite structure were synthesized by a single step at 150°C. The corresponding oxides were used as starting materials, namely PbO , MgO , Nb 2 O 5, and TiO 2. By using oxides as precursors, we simplified the hydrothermal process, allowing the process to be more economical. The influences of the Ti metal substrate on the PMN–PT 80/20 films are investigated. By surveying the variations of films, it was suggested that the substrate reacted with the ions in the solution. The films were smooth and homogeneous. There were no cracks and abnormity crystals on the surface of the films. The thickness was about 20 μm. The frequencies dependence of the dielectric properties of PMN–PT 80/20 films was stable even at a high frequency range over 1 MHz.

Dielectric Properties of Al2O3/CaCu3Ti4O12 Composite at High Frequency Range

2017 ◽  
Vol 888 ◽  
pp. 7-11
Author(s):  
Rosyaini Afindi Zaman ◽  
Mohamad Johari Abu ◽  
Mohd Fariz Ab Rahman ◽  
Wan Fahmin Faiz Wan Ali ◽  
Julie Juliewatty Mohamed ◽  
...  
Keyword(s):  
Dielectric Properties ◽  
High Frequency ◽  
Great Influence ◽  
Secondary Phase ◽  
Xrd Analysis ◽  
Calcium Titanate ◽  
Tangent Loss ◽  
High Frequency Range ◽  
Secondary Phases ◽  
Frequency Range

The dielectric properties of CCTO with addition Al2O3 prepared via solid state reaction investigated and reported at 1 GHz. With addition Al2O3 from 20 wt% to 80 wt%, secondary phase starts appear in XRD analysis such as copper dialuminium oxide (CuAl2O4), calcium titanate (CaTiO3) and titanium oxide (TiO2). These secondary phases show great influence on morphology and grain size of Al2O3/ CCTO composites. Hence, the addition of only 20 wt% Al2O3, the dielectric constant of CCTO reduce almost 50% and tangent loss is in between 0.0028 to 0.0630 which is very low and this characterization is suitable to use in electronic application in high frequency range.

Dielectric properties of optical quartz glass in the ultra-high frequency range and at temperatures of up to 1500�C

1971 ◽  
Vol 28 (3) ◽  
pp. 182-184 ◽  
Author(s):  
Yu. A. Polonskii ◽  
G. A. Pavlova ◽  
V. N. Savel'ev ◽  
T. V. Milovidova ◽  
V. B. Vinogradov
Keyword(s):  
Dielectric Properties ◽  
Quartz Glass ◽  
High Frequency ◽  
High Frequency Range ◽  
Frequency Range ◽  
Ultra High Frequency ◽  
Optical Quartz Glass

New Interference Technique for Determination of Low Loss Material Permittivity in the Extremely High Frequency Range

2015 ◽  
Vol 64 (11) ◽  
pp. 3005-3012 ◽  
Author(s):  
Nazariy A. Andrushchak ◽  
Ivan D. Karbovnyk ◽  
Konrad Godziszewski ◽  
Yevhen Yashchyshyn ◽  
Mykhailo V. Lobur ◽  
...  
Keyword(s):  
High Frequency ◽  
High Frequency Range ◽  
Frequency Range ◽  
Low Loss ◽  
Extremely High Frequency
Sign in / Sign up

Export Citation Format

Share Document