Electrical Detection of Protein Biomarkers Using Nanoneedle Biosensors

2012 ◽  
Vol 1414 ◽  
Author(s):  
Rahim Esfandyarpour ◽  
Hesaam Esfandyarpour ◽  
Mehdi Javanmard ◽  
James S. Harris ◽  
Ronald W. Davis

Abstract:Here we present the development of an array of electrical nano-biosensors in a microfluidic channel, called Nanoneedle biosensors. Then we present the proof of concept study for protein detection. A Nanoneedle biosensor is a real-time, label-free, direct electrical detection platform, which is capable of high sensitivity detection, measuring the change in ionic current and impedance modulation, due to the presence or reaction of biomolecules such as proteins or nucleic acids. We show that the sensors which have been fabricated and characterized for the protein detection. We have functionalized Nanoneedle biosensors with receptors specific to a target protein using physical adsorption for immobilization. We have used biotinylated bovine serum albumin as the receptor and sterptavidin as the target analyte. The detection of streptavidin binding to the receptor protein is also presented.

2007 ◽  
Vol 12 (5) ◽  
pp. 311-317 ◽  
Author(s):  
Vindhya Kunduru ◽  
Shalini Prasad

We demonstrate a technique to detect protein biomarkers contained in vulnerable coronary plaque using a platform-based microelectrode array (MEA). The detection scheme is based on the property of high specificity binding between antibody and antigen similar to most immunoassay techniques. Rapid clinical diagnosis can be achieved by detecting the amount of protein in blood by analyzing the protein's electrical signature. Polystyrene beads which act as transportation agents for the immobile proteins (antigen) are electrically aligned by application of homogenous electric fields. The principle of electrophoresis is used to produce calculated electrokinetic movement among the anti-C-reactive protein (CRP), or in other words antibody funtionalized polystyrene beads. The electrophoretic movement of antibody-functionalized polystyrene beads results in the formation of “Microbridges” between the two electrodes of interest which aid in the amplification of the antigen—antibody binding event. Sensitive electrical equipment is used for capturing the amplified signal from the “Microbridge” which essentially behaves as a conducting path between the two electrodes. The technique circumvents the disadvantages of conventional protein detection methods by being rapid, noninvasive, label-free, repeatable, and inexpensive. The same principle of detection can be applied for any receptor—ligand-based system because the technique is based only on the volume of the analyte of interest. Detection of the inflammatory coronary disease biomarker CRP is achieved at concentration levels spanning over the lower microgram/milliliter to higher order nanogram/milliliter ranges.


Biosensors ◽  
2019 ◽  
Vol 9 (4) ◽  
pp. 144 ◽  
Author(s):  
Jesslyn Janssen ◽  
Mike Lambeta ◽  
Paul White ◽  
Ahmad Byagowi

There is a growing need for biosensors that are capable of efficiently and rapidly quantifying protein biomarkers, both in the biological research and clinical setting. While accurate methods for protein quantification exist, the current assays involve sophisticated techniques, take long to administer and often require highly trained personnel for execution and analysis. Herein, we explore the development of a label-free biosensor for the detection and quantification of a standard protein. The developed biosensors comprise carbon nanotubes (CNTs), a specific antibody and cellulose filtration paper. The change in electrical resistance of the CNT-based biosensor system was used to sense a standard protein, bovine serum albumin (BSA) as a proof-of-concept. The developed biosensors were found to have a limit of detection of 2.89 ng/mL, which is comparable to the performance of the typical ELISA method for BSA quantification. Additionally, the newly developed method takes no longer than 10 min to perform, greatly reducing the time of analysis compared to the traditional ELISA technique. Overall, we present a versatile, affordable, simplified and rapid biosensor device capable of providing great benefit to both biological research and clinical diagnostics.


2021 ◽  
Vol 39 (15_suppl) ◽  
pp. e15019-e15019
Author(s):  
Qimin Quan ◽  
Joe Wilkinson ◽  
Joshua Ritchey ◽  
Alaina Kaiser ◽  
John Geanacopoulos ◽  
...  

e15019 Background: Liquid biopsy has evolved to be an important method complementary to tissue biopsy. It is not only non-invasive, but also has the potential to detect cancer in its earliest stages and monitor patients in remission. The integration of proteomics into liquid biopsy may transform the molecular diagnostics of cancer and accelerate basic and clinical oncology research. A recent study showed that adding just 8 protein biomarkers to a panel of circulating DNA biomarkers increased the diagnostic accuracy up to 98% sensitivity and 99% specificity. Proteomics also bridges the gaps of functional information lost due to post-transcriptional and post-translational modifications in the genomic approach. However, the proteogenomic approach normally requires the use of multiple different assay technologies and laboratory workflows, including mass spectrometry. Methods: NanoMosaic’s Tessie platform employs a densely integrated nanoneedle sensor array (thus named MosaicNeedles) which can be used to detect both nucleic acids and proteins in a single assay process with reduced workflow complexity, without the need for mass spectrometry. Results: The NanoMosaic platform is a label-free, digital, single molecule counting technology using nanoneedles. It achieves sub-pg/ml (̃fM) level sensitivity with 7 logs of dynamic range. An array of nanoneedles is densely integrated and manufactured with CMOS-compatible nanofabrication processes. Each nanoneedle is a single molecule biosensor that is functionalized with capture probes. The capture probe can be either an antibody for protein detection or an oligonucleotide with a specific target sequence to a DNA fragment, mRNA, or miRNA of interest. The scattering spectrum of each nanoneedle changes when an analyte binds to its surface. At low abundance, analytes that are captured can be quantitated by counting the presence or absence of a color change on each individual nanoneedle in a binary fashion. As an analyte concentration increases the binding events increase accordingly and achieve saturation. In this range, an analog analysis on the spectrum shift will be performed, thus providing a wider dynamic range, up to 7 logs. Ultrahigh level multiplex can be achieved by parallelizing each analyte specific sensing area without loss of sensitivity or dynamic range. A 10,000-plex study can be achieved with a total of 2.5 billion nanoneedles on a 50mm by 50mm consumable. In this consumable, a 2,000-plex proteome and 8,000 cell-free DNA fragments can be detected. Conclusions: In conclusion, a full proteogenomic quantification can be performed on the NanoMosaic platform in one reaction, with higher sensitivity, lower cost and higher throughput than is currently possible by traditional methods. In addition, the high-plexibility of the NanoMosaic platform allows the discovery of new biomarkers across the whole proteome without the need for mass spectrometry.


The Analyst ◽  
2016 ◽  
Vol 141 (13) ◽  
pp. 4189-4195 ◽  
Author(s):  
Yi-Kai Tu ◽  
Meng-Zhe Tsai ◽  
I-Chin Lee ◽  
Hsin-Yun Hsu ◽  
Cheng-Sheng Huang

The integration of a label-free biosensor of a guided-mode resonance filter and a microfluidic channel with a micropost filter.


2015 ◽  
Vol 184 ◽  
pp. 85-99 ◽  
Author(s):  
Xin Shi ◽  
Rui Gao ◽  
Yi-Lun Ying ◽  
Wei Si ◽  
Yunfei Chen ◽  
...  

Nanopore techniques have proven to be useful tools for single-molecule detection. The combination of optical detection and ionic current measurements enables a new possibility for the parallel readout of multiple nanopores without complex nanofluidics and embedded electrodes. In this study, we developed a new integrated system for the label-free optical and electrical detection of single molecules based on a metal-coated nanopore. The entire system, containing a dark-field microscopy system and an ultralow current detection system with high temporal resolution, was designed and fabricated. An Au-coated nanopore was used to generate the optical signal. Light scattering from a single Au-coated nanopore was measured under a dark-field microscope. A lab-built ultralow current detection system was designed for the correlated optical and electrical readout. This integrated system might provide more direct and detailed information on single analytes inside the nanopore compared with classical ionic current measurements.


2011 ◽  
Vol 1346 ◽  
Author(s):  
Timothy O. Mertz ◽  
Krishna Vattipalli ◽  
Tom Barrett ◽  
John Carruthers ◽  
Shalini Prasad

ABSTRACTThis paper describes the development of nanomonitors, which are electrical immunoassays for detection of multiple protein biomarkers. These devices are hybrid sensors with micro-fabricated electrode arrays on a silicon substrate, and integrated nanoporous alumina membranes to provide protein confinement and signal amplification. The disease biomarkers C-reactive protein and Myeloperoxidase have been detected by the nanomonitors in ultra-low concentrations. Proteins were detected in pure samples, human serum, and patient blood samples. The detection accuracy and sensitivity of the nanomonitors in patient samples was comparable to the Enzyme Linked Immunosorbent Assay (ELISA) method of protein detection. Nanomonitors provide the additional benefits of being rapid, label-free, sensitive, and cost effective, providing improvements over traditional protein detection methods, and having potential applications in disease diagnosis.


2009 ◽  
Vol 74 ◽  
pp. 337-340
Author(s):  
Tae Song Kim

The microcantilevers have emerged as a versatile biosensor, and showed excellent performance such as high sensitivity, high selectivity, and label-free detection. They have been successfully used for the detection of nucleic acids, disease marker proteins, cells, and pathogens including small molecules. So far, our group has successfully demonstrated the marker protein detection using the actuating layer (PZT)-embedded microcantilevers for the last decade. Here, we introduce in/ex-situ monitoring of the DNA binding events using performance improved actuating layer-embedded microcantilever sensors. To obtain the stable and reliable resonant frequency shifts, the microcantilevers were passivated with parylene-C film for in-situ detection and perfluorosilane (PF-Si) film for ex-situ detection. To achieve the recognition layer, the probe DNA (37-mer including T10 spacers) specific to HBV DNA was immobilized on the gold-coated microcantilever, and followed by backfilling of ethylene glycol spacer (HSC11-EG3-OH) to increase the DNA binding efficiency. After the surface treatment, the detection of HBV DNA (27-mer) was performed through two manners, in-situ and ex-situ. Target DNA in the range of 1 to 20 M and 10 nM to 5 M were applied for the in-situ and ex-situ detection respectively, and the resonant frequency shifts according to the concentration was examined quantitatively. From the results, we explained the relationship between the DNA hybridization and the nanomechanical response. In addition, we presented a hypothesis on the different tendency of in-situ and ex-situ results.


2006 ◽  
Vol 951 ◽  
Author(s):  
Christopher C. Striemer ◽  
Charles R. Mace ◽  
Benjamin L. Miller

ABSTRACTWe are developing label-free Arrayed Imaging Reflectometry (AIR) for rapid and multiplexed protein detection. AIR is based on the high dynamic range in reflected optical intensity near a point of zero reflectance on an antireflection coated substrate. The reflectance is therefore highly sensitive to changes in film thickness, allowing direct detection of molecular binding when appropriate probe molecules are immobilized on the surface. The simplest implementation of AIR uses a 633 nm HeNe laser and a silicon wafer substrate coated with ∼1400 Å of SiO2. This system has a reflectance zero for s-polarized HeNe light incident at ∼70°. This interference film is then functionalized with probe molecules designed to bind to a specific target, and this binding can be detected with high sensitivity in the reflectance signal. By expanding the laser beam and collecting the reflected signal with a CCD camera, large arrays of detection spots can be imaged simultaneously. Spot intensity increases relative to the amount of target binding and the target solution concentration can then be calculated. We have demonstrated the detection of the Enteropathogenic E Coli membrane protein Intimin at levels below 10 pM using receptor molecule Tir as a probe, and are currently evaluating various clinical targets using more common antibody probes.


2021 ◽  
Vol 2021 ◽  
pp. 1-17
Author(s):  
Shirui Chen ◽  
Hui Zhang ◽  
Mengting Liu ◽  
Yaochi Wang ◽  
Cong Xin ◽  
...  

The development of mass spectrometry has provided a method with extremely high sensitivity and selectivity that can be used to identify protein biomarkers. Epidermal proteins, lipids, and cornified envelopes are involved in the formation of the skin epidermal barrier. The epidermal protein composition changes with age. Therefore, quantitative proteomic changes may be indicative of skin aging. We sought to utilize data-independent acquisition mass spectrometry for noninvasive analysis of epidermal proteins in healthy Chinese individuals of different age groups and sexes. In our study, we completed high-throughput protein detection, analyzed protein differences with MaxQuant software, and performed statistical analyses of the proteome. We obtained interesting findings regarding ceruloplasmin (CP), which exhibited significant differences and is involved in ferroptosis, a signaling pathway significantly associated with aging. There were also several proteins that differed between sexes in the younger group, but the sex differences disappeared with aging. These proteins, which were associated with both aging processes and sex differences, are involved in signaling pathways such as apoptosis, oxidative stress, and genomic stability and can serve as candidate biomarkers for sex differences during aging. Our approach for noninvasive detection of epidermal proteins and its application to accurately quantify protein expression can provide ideas for future epidermal proteomics studies.


2018 ◽  
Author(s):  
Jatin Panwar ◽  
Rahul Roy

AbstractMicrofluidic impedance cytometry (MIC) provides a non-optical and label-free method for single cell detection and classification in microfluidics. However, the cleanroom intensive infrastructure required for MIC electrode fabrication limits its wide implementation in microfluidic analysis. To bypass the conventional metal (platinum) electrode fabrication protocol, we fabricated coplanar ‘in-contact’ Field’s metal (icFM) microelectrodes in multilayer elastomer devices with a single photolithography step. Our icFM microelectrodes displayed excellent and comparable performance to the platinum electrodes for detection of single erythrocytes with a lock-in amplifier based MIC setup. We further characterized it for water-in-oil droplets generated in a T-junction microfluidic channel and found high sensitivity and long-term operational stability of these electrodes. Finally, to facilitate droplet based single cell analysis, we demonstrate detection and quantification of single cells entrapped in aqueous droplets.


Sign in / Sign up

Export Citation Format

Share Document