scholarly journals Nitrogen and Silicon Defect Incorporation during Homoepitaxial CVD Diamond Growth on (111) Surfaces

2015 ◽  
Vol 1734 ◽  
Author(s):  
Samuel L. Moore ◽  
Yogesh K. Vohra

ABSTRACTChemical Vapor Deposited (CVD) diamond growth on (111)-diamond surfaces has received increased attention lately because of the use of N-V related centers in quantum computing as well as application of these defect centers in sensing nano-Tesla strength magnetic fields. We have carried out a detailed study of homoepitaxial diamond deposition on (111)-single crystal diamond (SCD) surfaces using a 1.2 kW microwave plasma CVD (MPCVD) system employing methane/hydrogen/nitrogen/oxygen gas phase chemistry. We have utilized Type Ib (111)-oriented single crystal diamonds as seed crystals in our study. The homoepitaxially grown diamond films were analyzed by Raman spectroscopy, Photoluminescence Spectroscopy (PL), X-ray Photoelectron Spectroscopy (XPS), Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM). The nitrogen concentration in the plasma was carefully varied between 0 and 1500 ppm while a ppm level of silicon impurity is present in the plasma from the quartz bell jar. The concentration of N-V defect centers with PL zero phonon lines (ZPL) at 575nm and 637nm and the Si-defect center with a ZPL at 737nm were experimentally detected from a variation in CVD growth conditions and were quantitatively studied. Altering nitrogen and oxygen concentration in the plasma was observed to directly affect N-V and Si-defect incorporation into the (111)-oriented diamond lattice and these findings are presented.

2006 ◽  
Vol 956 ◽  
Author(s):  
Nicolas Olivier Tranchant ◽  
Dominique Tromson ◽  
Zdenek Remes ◽  
Licinio Rocha ◽  
Milos Nesladek ◽  
...  

ABSTRACTDue to its radiation harness, single crystal CVD diamond is a remarkable material for the construction of detectors used in hadron physics and for medical therapy. In this work, single crystal CVD diamond plates were grown in a microwave plasma reactor, using home design substrate holder and a relatively high pressure. Optical Emission Spectroscopy was employed during the MW-PECVD growth to characterize excited species present in the plasma and to detect the presence of residual gases such as nitrogen which is unsuitable for detector's applications.The samples were characterized using various methods such as Raman spectroscopy, photoluminescence (PL), photocurrent spectroscopy, Raman mapping, birefringence microscopy, optical microscopy and also AFM. The best sample, exhibits a FWHM for the 1332 cm−1 Raman peak about 1.6 cm−1. Room temperature PL spectra showed no N–related luminescence, confirming the high quality of the grown single crystal diamond.


CrystEngComm ◽  
2022 ◽  
Author(s):  
Wei Cao ◽  
Zhibin Ma ◽  
Hongyang Zhao ◽  
Deng Gao ◽  
Qiuming Fu

On a semi-open holder, the homoepitaxial lateral growth of single-crystal diamond (SCD) was carried out via microwave plasma chemical vapor deposition (MPCVD). By tuning and optimizing two different structures of...


1993 ◽  
Vol 317 ◽  
Author(s):  
M.M. Waitew ◽  
S. Ismat Shah

ABSTRACTDiamond films were deposited in a microwave plasma chemical vapor deposition (MPCVD) system on Ta substrates using a mixture of hydrogen and methane gases. The films were grown for varying lengths of time to provide samples with no diamond growth to a continuous diamond film. These films were analyzed using X-ray photoelectron spectroscopy (XPS) in order to understand the time dependent interactions between the substrate and the incoming carbon flux. Photoelectron peaks in the Ta 4f, C Is and Ols regions have been analyzed. In the initial stages of growth, a layer of carbide forms on the substrate. As the substrate becomes supersaturated with carbon, graphite starts to form on the surface. A diamond peak begins to appear after about 30 Minutes of deposition.


2006 ◽  
Vol 15 (2-3) ◽  
pp. 304-308 ◽  
Author(s):  
Pawan K. Tyagi ◽  
Abha Misra ◽  
K.N. Narayanan Unni ◽  
Padmnabh Rai ◽  
Manoj K. Singh ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document