Germanium-Silicon Separate Absorption and Multiplication Avalanche Photodetectors Fabricated with Low Temperature High Density Plasma Chemical Vapor Deposited Germanium
AbstractA desire to monolithically integrate near infrared (NIR) detectors with silicon complementary metal oxide semiconductor (CMOS) technology has motivated many investigations of single crystal germanium on silicon (Ge/Si) diodes [1-3]. Reduction of the epitaxy thermal budget below the typical chemical vapor deposition (CVD) in-situ clean temperature (Tin-situ clean > 780°C) is also increasingly desired to reduce integration complexity. Reduced temperature growth approaches have included p+-Ge/n-Si detectors formed with low temperature poly-Ge (e-beam evaporation) or heavily dislocated single crystal germanium (molecular beam epitaxy, T ~ 450°C), which have had dark currents of ~5 mA/cm2 and responsivities of ~15 mA/W at 1310 nm, despite the large number of defects in and at the Ge/Si interface. Responsivities in these materials are however low and believed to be limited by a small diffusion length (i.e., 5-30 nm [2, 4]) due to fast electron recombination in the defect rich germanium. In this paper, we evaluate a commercially available high density plasma chemical vapor deposition (HDP-CVD) process to grow low temperature (i.e., Tin-situ & Tepitaxy < ~450°C) germanium epitaxy for a p+-Ge/p-Si/n+-Si NIR separate absorption and multiplication avalanche photodetectors (SAM-APD). This device structure is of interest both to examine ways to enhance the responsivity with internal gain as well as to examine alternatives to InGaAs-InP structures for NIR Geiger mode (GM) detection. A silicon avalanche region is highly desirable for GM to reduce after-pulsing effects, which are related to defect density that are smaller in Si than in InP [5]. Despite the high defect densities in the Ge and at the interface, the Ge-Si APDs in this work are found to have relatively low dark count rates in Geiger mode.