Imaging Electron Transport across Grain Boundaries in an Integrated Electron and Atomic Force Microscopy Platform: Application to Polycrystalline Silicon Solar Cells

2009 ◽  
Vol 1153 ◽  
Author(s):  
Manuel J Romero ◽  
Fude Liu ◽  
Oliver Kunz ◽  
Johnson Wong ◽  
Chun-Sheng Jiang ◽  
...  

AbstractWe have investigated the local electron transport in polycrystalline silicon (pc-Si) thin-films by atomic force microscopy (AFM)-based measurements of the electron-beam-induced current (EBIC). EVA solar cells are produced at UNSW by <i>EVAporation</i> of a-Si and subsequent <i>solid-phase crystallization</i>–a potentially cost-effective approach to the production of pc-Si photovoltaics. A fundamental understanding of the electron transport in these pc-Si thin films is of prime importance to address the factors limiting the efficiency of EVA solar cells. EBIC measurements performed in combination with an AFM integrated inside an electron microscope can resolve the electron transport across individual grain boundaries. AFM-EBIC reveals that most grain boundaries present a high energy barrier to the transport of electrons for both p-type and n-type EVA thin-films. Furthermore, for p-type EVA pc-Si, in contrast with n-type, charged grain boundaries are seen. Recombination at grain boundaries seems to be the dominant factor limiting the efficiency of these pc-Si solar cells.

Nanomaterials ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 1082
Author(s):  
Da-Seul Choi ◽  
Sung-Nam Kwon ◽  
Seok-In Na

PC61BM is commonly used in perovskite solar cells (PSC) as the electron transport material (ETM). However, PC61BM film has various disadvantages, such as its low coverage or the many pinholes that appear due to its aggregation behavior. These faults may lead to undesirable direct contact between the metal cathode and perovskite film, which could result in charge recombination at the perovskite/metal interface. In order to overcome this problem, three alternative non-fullerene electron materials were applied to inverted PSCs; they were evaluated on suitability as electron transport layers. The roles and effects of these non-fullerene ETMs on device performance were studied using photoluminescence (PL) measurements, field emission scanning electron microscopy (FE-SEM), atomic force microscopy (AFM), internal resistance in PSC measurements, and conductive atomic force microscopy (C-AFM). It was found that one of the tested materials, IT-4f, showed excellent electron extraction ability and was associated with reduced recombination. The PSC with IT-4f as the ETM produced better cell-performance; it had an average PCE of 11.21%, which makes it better than the ITIC and COi8DFIC-based devices. Finally, IT-4f was compared with PC61BM; it was found that the two materials have quite comparable efficiency and stability levels.


2002 ◽  
Vol 09 (05n06) ◽  
pp. 1617-1621
Author(s):  
C. CALDERÓN ◽  
H. INFANTE ◽  
G. GORDILLO

This work presents results concerning the development of n +- ZnO/i-ZnO and n +- ZnO/ZnSe bilayer structures with adequate properties to be used as optical windows in solar cells based on CuInSe 2 thin films. The optical and morphological properties of each of the layers constituting the bilayer structures were studied through spectral transmittance and atomic force microscopy (AFM) measurements. The studies revealed that windows of this type allow a significant increase of the spectral range of absorbed radiation by the solar cell in comparison with those using ZnO/CdS as optical window.


Sign in / Sign up

Export Citation Format

Share Document