XRD and Tem Characterization of Cathodic MnO2 and Discharge Products in the Li-MnO2 Cell

1995 ◽  
Vol 393 ◽  
Author(s):  
Y. Shao ◽  
S.A. Hackney ◽  
B.C. Cornilsen
Keyword(s):  
Lattice Parameter ◽  
X Ray Diffraction ◽  
Electrolytic Manganese Dioxide ◽  
Cathodic Material ◽  
X Ray ◽  
Heat Treated ◽  
Electrolytic Manganese ◽  
Xrd Patterns ◽  
Convergent Beam

ABSTRACTThe crystal structures of the undischarged, heat-treated electrolytic manganese dioxide (HEMD) and discharge products are characterized by high spatial resolution convergent beam electron diffraction (CBED). The results are compared with the x-ray diffraction (XRD) patterns characterized by broad, diffuse peaks. The CBED results for HEMD show that the starting cathodic material has the pyrolusite space group, but with a range of c/a ratios. The variability of the lattice parameter from grain to grain is found to coincide with the broadening on the low angle side of the XRD peaks. The CBED patterns of discharge products suggest a reduction range in c/a ratios and the formation of another phase.

scholarly journals MOVPE Growth of Quaternary (Al,Ga,In)N for UV Optoelectronics

2000 ◽  
Vol 5 (S1) ◽  
pp. 412-424
Author(s):  
Jung Han ◽  
Jeffrey J. Figiel ◽  
Gary A. Petersen ◽  
Samuel M. Myers ◽  
Mary H. Crawford ◽  
...  
Keyword(s):  
Room Temperature ◽  
Rutherford Backscattering Spectrometry ◽  
Optoelectronic Devices ◽  
Lattice Parameter ◽  
X Ray Diffraction ◽  
X Ray ◽  
Peak Energy ◽  
Movpe Growth ◽  
Pl Emission

We report the growth and characterization of quaternary AlGaInN. A combination of photoluminescence (PL), high-resolution x-ray diffraction (XRD), and Rutherford backscattering spectrometry (RBS) characterizations enables us to explore the contours of constant- PL peak energy and lattice parameter as functions of the quaternary compositions. The observation of room temperature PL emission at 351nm (with 20% Al and 5% In) renders initial evidence that the quaternary could be used to provide confinement for GaInN (and possibly GaN). AlGaInN/GaInN MQW heterostructures have been grown; both XRD and PL measurements suggest the possibility of incorporating this quaternary into optoelectronic devices.

MOVPE Growth of Quaternary (Al,Ga,In)N for UV Optoelectronics

1999 ◽  
Vol 595 ◽  
Author(s):  
Jung Han ◽  
Jeffrey J. Figiel ◽  
Gary A. Petersen ◽  
Samuel M. Myers ◽  
Mary H. Crawford ◽  
...  
Keyword(s):  
Room Temperature ◽  
Rutherford Backscattering Spectrometry ◽  
Optoelectronic Devices ◽  
Lattice Parameter ◽  
X Ray Diffraction ◽  
X Ray ◽  
Peak Energy ◽  
Movpe Growth ◽  
Pl Emission

AbstractWe report the growth and characterization of quaternary AlGaInN. A combination of photoluminescence (PL), high-resolution x-ray diffraction (XRD), and Rutherford backscattering spectrometry (RBS) characterizations enables us to explore the contours of constant- PL peak energy and lattice parameter as functions of the quaternary compositions. The observation of room temperature PL emission at 351nm (with 20% Al and 5% In) renders initial evidence that the quaternary could be used to provide confinement for GaInN (and possibly GaN). AlGaInN/GaInN MQW heterostructures have been grown; both XRD and PL measurements suggest the possibility of incorporating this quaternary into optoelectronic devices.

Synthesis and Characterization of Cadmium with Titanium Oxide (Cd-TiO2) Nanocomposite: Testing its Antibacterial Effect

2021 ◽  
Vol 12 (4) ◽  
pp. 2523-2529
Author(s):  
Daniel Sam N ◽  
Anish C I ◽  
Sabeena G ◽  
Rajaduraipandian S ◽  
Manobala ◽  
...  
Keyword(s):  
Sol Gel ◽  
Gram Negative Bacteria ◽  
X Ray Diffraction ◽  
Sem Images ◽  
Gram Negative ◽  
X Ray ◽  
Weight Percentage ◽  
Inhibition Concentration ◽  
Xrd Patterns

Sol gel methods were used for the study of the antimicrobial activity of Cd-TiO2 against gram-negative and positive bacteria. These Cd-TiO2 have been characterized by various optical and techniques. They have been exhibited by X-ray diffraction, scanning electron microscopy, ultraviolet spectroscopy, and infrared spectroscopy. The structures of the various XRD patterns indicate that the product has a structure. The particle size of Cd-TiO2 is 35nm. The SEM images confirm the spherical appearance of the sample. The energy X-ray spectra have been confirmed as well and then C, O, Ti, Cd, Pt element are present in Cd-TiO2. The weight percentage of Cadmium is 5.8%, Ti is 51.03%, C is 5.13% and O is 31.75% in Cd-TiO2. BET image shows that the major pore size distribution of Cd-TiO2 is ranged from 2.24 nm. The Cd-TiO2 that the antibacterial activity when tested against the pathogens only gram-negative bacteria such as Pseudomonas. The zone of minimum inhibition concentration was measured in a range of 20mm in 25μl and 30mm in 100μl.

Microstructure Characterization of the Reaction Interface between CBN Grain and Titanium-Deposited Film

2012 ◽  
Vol 538-541 ◽  
pp. 166-171
Author(s):  
Wen Feng Ding ◽  
Yang Min Liang ◽  
Jian He ◽  
Li Tang ◽  
Jie Yu ◽  
...  
Keyword(s):  
Heating Temperature ◽  
Cubic Boron Nitride ◽  
High Vacuum ◽  
Reaction Products ◽  
X Ray Diffraction ◽  
X Ray ◽  
Energy Dispersion Spectrometer ◽  
Heat Treated ◽  
Deposited Film

Cubic boron nitride (CBN) abrasive grains with surface titanium-deposited film were heat-treated during 550-950°C for 60 min under high vacuum circumstance. Detailed interfacial compounds analysis by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersion spectrometer (EDS), differential thermal analysis (DTA) indicates that the interfacial reactions are much dependent on the heating temperature to some extents, and the reaction products, TiN, TiB2 and TiB chiefly form the network structure. In particular, at 950°C the transition layers with excellent performance, CBN/TiB2/TiB/(TiB+TiN)/TiN/CBN, is realized.

SYNTHESIS AND CHARACTERIZATION OF NANOCRYSTALLINE FeNi AND Ni3Fe ALLOYS

2011 ◽  
Vol 25 (07) ◽  
pp. 1013-1019 ◽  
Author(s):  
S. AZADEHRANJBAR ◽  
F. KARIMZADEH ◽  
M. H. ENAYATI
Keyword(s):  
Ball Mill ◽  
Morphological Evolution ◽  
Lattice Parameter ◽  
Internal Stresses ◽  
Alloy Formation ◽  
X Ray Diffraction ◽  
X Ray ◽  
Powder Particles ◽  
Fe Alloys

Nanocrystalline FeNi and Ni 3 Fe alloys were prepared by mechanical alloying of Fe and Ni elemental powders using a planetary ball mill under protection atmosphere. X-ray diffraction measurements were performed to follow alloy formation process in these alloys. A heat treatment of 1 h at 800°C was carried out to relax the internal stresses of the milled samples. Morphological evolution of powder particles was revealed by scanning electron microscopy. The value of lattice parameter was reached to 0.35762 nm and the hardness was found to be 686 HV at 30 h milled FeNi powder. In the case of Ni 3 Fe the values of 0.3554 nm and 720 HV were obtained for lattice parameter and hardness, respectively.

Studied on Structural Characterization of Lanthanum Doped Barium Titanium Ceramics

2015 ◽  
Vol 819 ◽  
pp. 198-203
Author(s):  
Nur Farahin Abdul Hamid ◽  
Rozana Aina Maulat Osman ◽  
Mohd Sobri Idris ◽  
Tze Qing Tan
Keyword(s):  
Crystal Structure ◽  
Lattice Parameter ◽  
Phase Changes ◽  
X Ray Diffraction ◽  
X Ray ◽  
Tetragonal Crystal ◽  
Tetragonal Crystal Structure ◽  
La Doped ◽  
Conventional Solid State Synthesis

La-doped barium titanate (BaTiO3) was prepared using conventional solid state synthesis route. All peaks for sample x=0 are approaching the phase pure of BaTiO3 structure with tetragonal crystal structure (P4mm). Sintering of pressed powder are performed at 1300oC, 1400oC and 1450oC for overnight for pure BaTiO3 and 1350oC for 3 days for BaTiO3 doped lanthanum with intermittent grinding. Phase transition was studied by different x composition. The changes in the crystal structure of the composition x=0.1 and 0.2 were detected by using X-ray diffraction (XRD). The phase changes between tetragonal-cubic and cubic-tetragonal depending on the temperature. Rietveld Refinement analysis is carried out to determine the lattice parameter and unit cell for BaTiO3.

Characterization of microstructures in Inconel 625 using X-ray diffraction peak broadening and lattice parameter measurements

2004 ◽  
Vol 51 (1) ◽  
pp. 59-63 ◽  
Author(s):  
Sanjay K. Rai ◽  
Anish Kumar ◽  
Vani Shankar ◽  
T. Jayakumar ◽  
K. Bhanu Sankara Rao ◽  
...  
Keyword(s):  
Lattice Parameter ◽  
Diffraction Peak ◽  
Inconel 625 ◽  
X Ray Diffraction ◽  
X Ray ◽  
Peak Broadening

Synthesis and Characterization of CeO2 Doped ZrO2 Ceramics by a Simple Sol-Gel Route

2017 ◽  
Vol 907 ◽  
pp. 56-60
Author(s):  
Ummuhanı Hilal Özer ◽  
Kerim Emre Öksüz ◽  
Ali Özer
Keyword(s):  
Tetragonal Phase ◽  
Sol Gel ◽  
Lattice Parameter ◽  
X Ray Diffraction ◽  
Ceramic Powders ◽  
Zirconia Ceramics ◽  
Simple Method ◽  
X Ray ◽  
Gel Technique

It is well known that sol-gel technique is a simple method to produce nano sized ceramic powders. In this study, cerium oxide doped zirconia samples, with 10 mol%-12mol% and14mol% CeO2, were synthesized by sol-gel technique and characterized. The surface morphology, elemental composition, microstructure, and phase analysis, of the sintered CeO2 doped ZrO2 ceramics were characterized by field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray (EDS) analysis, and X-ray diffraction (XRD) respectively. X-ray diffraction for samples sintered at 1550 °C for 4h revealed that the zirconia ceramics have a tetragonal phase structure. The addition of CeO2 can raise the content of the tetragonal phase, but the minor monoclinic phase exists even at the CeO2 content of 10 mol%. The effect of dopant concentration on the lattice parameter, average primary crystallite size and micro-strain was studied. Relative densities for CeO2 doped ZrO2 bulk ceramics varied between 95% and 99 %, depending on the CeO2 addition.

Sign in / Sign up

Export Citation Format

Share Document