A New Practical Approach to Implement a Transient Enhanced Diffusion Model into an Fem-Based 2-D Process Simulator

1997 ◽  
Vol 490 ◽  
Author(s):  
Noriyuki Sugiyasu ◽  
Kaina Suzuki ◽  
Syuichi Kojima ◽  
Yasushi Ohyama
Keyword(s):  
Diffusion Model ◽  
Boron Diffusion ◽  
Combined Method ◽  
Solution System ◽  
Charge Neutrality ◽  
Robust Solution ◽  
Enhanced Diffusion ◽  
Transient Enhanced Diffusion ◽  
Vacancy Pair ◽  
Process Simulator

ABSTRACTWe have proposed a coupled and de-coupled combined method to solve partial differential equations for a transient enhanced diffusion model. In the case of a boron diffusion process, the sum of concentrations of interstitial Si and of impurity-interstitial pair, the sum of concentrations of vacancy and of impurity-vacancy pair and each chemical impurity concentration are kept constant. The charge neutrality law is also applied. This procedure has realized a robust solution system which is implemented into our in-house FEM-based 2-D process simulator, and transient enhanced diffusion simulations for a sub-quarter micron nMOSFET have been demonstrated.

Investigation of Fluorine Effect on the Boron Diffusion by Mean of Boron Redistribution in Shallow Delta-doped Layers

2004 ◽  
Vol 810 ◽  
Author(s):  
A. Halimaoui ◽  
J. M. Hartmann ◽  
C. Laviron ◽  
R. El-Farhane ◽  
F. Laugier
Keyword(s):  
Point Defects ◽  
Depth Profiling ◽  
Boron Diffusion ◽  
Enhanced Diffusion ◽  
Boron Doped ◽  
Transient Enhanced Diffusion ◽  
Sims Depth Profiling

ABSTRACTPreviously published articles have shown that co-implanted fluorine reduces transient enhanced diffusion of boron. However, it is not yet elucidated whether this effect is due to interaction of fluorine with point-defects or boron atoms. In this work, we have used boron redistribution in a shallow Delta-doped Si structures in order to get some insights into the role of fluorine in the boron diffusion. The structures consisted of 3 boron-doped layers separated by 40nm-thick undoped silicon. The samples were given to Ge preamorphization and F co-implant. SIMS depth profiling was used to analyse boron redistribution after annealing. The results we obtained strongly suggest that fluorine is not interacting with point-defects. The reduction in boron TED is most probably due to boron-fluorine interaction.

Simulation of Transient Enhanced Diffusion in Silicon Taking into Account Ostwald Ripening of Defects

2002 ◽  
Vol 717 ◽  
Author(s):  
Masashi Uematsu
Keyword(s):  
Time Dependence ◽  
Diffusion Model ◽  
Low Dose ◽  
Ostwald Ripening ◽  
High Dose ◽  
Enhanced Diffusion ◽  
Annealing Conditions ◽  
Transient Enhanced Diffusion ◽  
High Dose Implantation ◽  
Medium Dose

AbstractThe transient enhanced diffusion (TED) of high-dose implanted P is simulated taking into account Ostwald ripening of end-of-range (EOR) defects. First, we integrated a basic diffusion model based on the simulation of in-diffusion, where no implanted damages are involved. Second, from low-dose implantation, we developed a model for TED due to {311} self-interstitial (I) clusters involving Ostwald ripening and the dissolution of {311} clusters. Third, from medium-dose implantation, we showed that P-I clusters should be taken into account, and during the diffusion, the clusters are dissolved to emit self-interstitials that also contribute to TED. Finally, from high-dose implantation, EOR defects are modeled and we derived a formula to describe the time-dependence for Ostwald ripening of EOR defects, which is more significant at higher temperatures and longer annealing times. The simulation satisfactorily predicts the TED for annealing conditions, where the calculations overestimate the diffusion without taking Ostwald ripening into account.

Effect of Nitrogen Implants on Boron Transient Enhanced Diffusion

2000 ◽  
Vol 610 ◽  
Author(s):  
Omer Dokumaci ◽  
Paul Ronsheim ◽  
Suri Hegde ◽  
Dureseti Chidambarrao ◽  
Lahir Shaik-Adam ◽  
...  
Keyword(s):  
Low Temperature ◽  
Boron Diffusion ◽  
High Nitrogen ◽  
Enhanced Diffusion ◽  
Transient Enhanced Diffusion ◽  
High Boron ◽  
Buried Layer ◽  
Higher Doses ◽  
Low Nitrogen ◽  
Temperature Furnace

AbstractThe effect of nitrogen implants on boron transient enhanced diffusion was studied for nitrogen-only, boron-only, and boron plus nitrogen implants. A boron buried layer was used as a detector for interstitial supersaturation in the samples. Boron dose ranged from 1×1014 to 1×1015 cm−2 and N2+ dose from 5×1013 and 5×1014 cm−2. The energies were chosen such that the location of the nitrogen and boron peaks matched. After the implants, RTA and low temperature furnace anneals were carried out. The diffusivity enhancements were extracted from the buried layer profiles by simulation. Nitrogen-only implants were found to cause significant enhanced diffusion on the buried boron layer. For lower doses, the enhancement of the nitrogen implant is about half as that of boron whereas the enhancements are equal at higher doses. Nitrogen coimplant with boron increases the transient enhanced diffusion of boron at low boron doses, which implies that nitrogen does not act as a strong sink for excess interstitials unlike carbon. At high boron doses, nitrogen co-implant does not significantly change boron diffusion. Sheet resistance measurements indicate that low nitrogen doses do not affect the activation of boron whereas high nitrogen doses either reduce the activation of boron or the mobility of the holes.

The Effect of Fluorine Implantation on Boron Diffusion in Metastable Si0.86 Ge0.14

2004 ◽  
Vol 810 ◽  
Author(s):  
Huda A. W. A. El Mubarek ◽  
Yun Wang ◽  
Janet M. Bonar ◽  
Peter Hemment ◽  
Peter Ashburn
Keyword(s):  
Thermal Diffusion ◽  
Sige Layer ◽  
Dislocation Loops ◽  
Boron Diffusion ◽  
Rich Region ◽  
Implantation Energy ◽  
Enhanced Diffusion ◽  
Partial Relaxation ◽  
Transient Enhanced Diffusion ◽  
Marker Layer

ABSTRACTThis paper investigates the effect of varying F+ implantation energy on boron thermal diffusion and boron transient enhanced diffusion (TED) in metastable Si0.86Ge0.14 by characterising the diffusion of a boron marker layer in samples with and without P+ and F+ implants. The effect of two F+ implantation energies (185keV and 42keV) was studied at two anneal temperatures 950°C and 1025°C. In samples implanted with P+ & 185keV F+, the fluorine suppresses boron transient enhanced diffusion completely at 950°C and suppresses thermal diffusion by 25% at 1025°C. In samples implanted with P+ & 42keV F+, the fluorine does not reduce boron transient enhanced diffusion at 950°C. This result is explained by the location of the boron marker layer in the vacancy-rich region of the fluorine damage profile for the 185keV implant but in the interstitial-rich region for the 42keV implant. Isolated dislocation loops are seen in the SiGe layer for the 185keV implant. We postulate that these loops are due to the partial relaxation of the metastable Si0.86Ge0.14 layer.

Effects of Interstitial Clustering on Transient Enhanced Diffusion of Boron in Silicon

1996 ◽  
Vol 439 ◽  
Author(s):  
S. Solmi ◽  
S. Valmorri
Keyword(s):  
Diffusion Mechanism ◽  
Boron Diffusion ◽  
Experimental Conditions ◽  
Enhanced Diffusion ◽  
Transient Enhanced Diffusion ◽  
Good Account ◽  
Diffusion Enhancement ◽  
Heavily Doped ◽  
Kinetics Of ◽  
New Phase

AbstractA simulation model for Boron diffusion which takes into account the aggregation of the excess interstitials in clusters, and subsequently, the dissolution of these defects, is proposed. The interstitial supersaturation and generation rate are determined according to the classical theory of nucleation and growth of particles, in analogy with the precipitation of a new phase in heavily doped silicon. The clusters are considered as precipitates formed by interstitial Si atoms. The B diffusion is modelled on the basis of the dopant-interstitial pair diffusion mechanism. The clusters dissolution during annealing maintains nearly constant, for a long period, the interstitial supersaturation and the related enhancement of the boron diffusion. This gives a good account of the diffusion results over a large range of experimental conditions. Furthermore, this approach describes most of the behavior of the transient enhanced diffusion (TED), like the temperature dependence of the level of the B diffusion enhancement, the dependence of the duration of the phenomenon on implanted dose, and the scarce dependence on the damage distribution in depth. The results of the simulations are compared with experimental data on the kinetics of interstitial cluster dissolution and of B TED.

Transient Enhanced Diffusion of Dopants in Preamorphised Si Layers

1996 ◽  
Vol 438 ◽  
Author(s):  
A. Claverie ◽  
C. Bonafos ◽  
M. Omri ◽  
B. De Mauduit ◽  
G. Ben Assayag ◽  
...  
Keyword(s):  
Ostwald Ripening ◽  
Dislocation Loops ◽  
Boron Diffusion ◽  
Enhanced Diffusion ◽  
Transient Enhanced Diffusion ◽  
Interstitial Atoms ◽  
Extrinsic Dislocation ◽  
The Mean ◽  
Boron Diffusivity ◽  
Shed Light

AbstractTransient Enhanced Diffusion (TED) of dopants in Si is the consequence of the evolution, upon annealing, of a large supersaturation of Si self-interstitial atoms left after ion bombardment. In the case of amorphizing implants, this supersaturation is located just beneath the c/a interface and evolves through the nucleation and growth of End-Of-Range (EOR) defects.For this reason, we discuss here the relation between TED and EOR defects. Modelling of the behavior of these defects upon annealing allows one to understand why and how they affect dopant diffusion. This is possible through the development of the Ostwald ripening theory applied to extrinsic dislocation loops. This theory is shown to be readily able to quantitatively describe the evolution of the defect population (density, size) upon annealing and gives access to the variations of the mean supersaturation of Si self-interstitial atoms between the loops and responsible for TED. This initial supersaturation is, before annealing, at least 5 decades larger than the equilibrium value and exponentially decays with time upon annealing with activation energies that are the same than the ones observed for TED. It is shown that this time decay is precisely at the origin of the transient enhancement of boron diffusivity through the interstitial component of boron diffusion. Side experiments shed light on the effect of the proximity of a free surface on the thermal behavior of EOR defects and allow us to quantitatively describe the space and time evolutions of boron diffusivity upon annealing of preamorphised Si layers.

Effects of Interstitial Clustering on Transient Enhanced Diffusion of Boron in Silicon

1996 ◽  
Vol 438 ◽  
Author(s):  
S. Solmi ◽  
S. Valmorri
Keyword(s):  
Diffusion Mechanism ◽  
Boron Diffusion ◽  
Experimental Conditions ◽  
Enhanced Diffusion ◽  
Transient Enhanced Diffusion ◽  
Good Account ◽  
Diffusion Enhancement ◽  
Heavily Doped ◽  
Kinetics Of ◽  
New Phase

AbstractA simulation model for Boron diffusion which takes into account the aggregation of the excess interstitials in clusters, and subsequently, the dissolution of these defects, is proposed. The interstitial supersaturation and generation rate are determined according to the classical theory of nucleation and growth of particles, in analogy with the precipitation of a new phase in heavily doped silicon. The clusters are considered as precipitates formed by interstitial Si atoms. The B diffusion is modelled on the basis of the dopant-interstitial pair diffusion mechanism. The clusters dissolution during annealing maintains nearly constant, for a long period, the interstitial supersaturation and the related enhancement of the boron diffusion. This gives a good account of the diffusion results over a large range of experimental conditions. Furthermore, this approach describes most of the behavior of the transient enhanced diffusion (TED), like the temperature dependence of the level of the B diffusion enhancement, the dependence of the duration of the phenomenon on implanted dose, and the scarce dependence on the damage distribution in depth. The results of the simulations are compared with experimental data on the kinetics of interstitial cluster dissolution and of B TED.

Effect of Recoil Implantation of Oxygen on Boron Enhanced Diffusion in Silicon

1989 ◽  
Vol 147 ◽  
Author(s):  
D. Fan ◽  
R. J. Jaccodine
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Silicon Dioxide ◽  
Device Fabrication ◽  
Boron Diffusion ◽  
Spreading Resistance ◽  
Recoil Implantation ◽  
Enhanced Diffusion ◽  
Transient Enhanced Diffusion ◽  
Transmission Electron

In device fabrication, dopants are frequently implanted into silicon through silicon dioxide masks. A consequence of this technique is the co-implantation of recoiled oxygen into the substrate. This study investigates the effect of recoiled oxygen on the widely observed transient enhanced boron diffusion. Comparison of the spreading resistance profiles of annealed through-oxide and directly implanted samples reveals that transient enhanced diffusion of boron can be suppressed by the former process. Continued annealing of the through-oxide implanted silicon recovers the enhanced diffusion of boron. This behavior is believed to be due to precipitation of recoiled oxygen. The mechanisms leading to the above observations are discussed and transmission electron microscopy support presented.

Quantitative Measurement of Reduction of Boron Diffusion by Substitutional Carbon Incorporation

1998 ◽  
Vol 527 ◽  
Author(s):  
M. S. Carroll ◽  
L. D. Lanzerotti ◽  
J. C. Sturm
Keyword(s):  
Quantitative Measurement ◽  
Device Modeling ◽  
Electrical Characteristics ◽  
Boron Diffusion ◽  
Carbon Incorporation ◽  
Combined Process ◽  
Enhanced Diffusion ◽  
Interstitial Concentration ◽  
Transient Enhanced Diffusion ◽  
Boron Diffusivity

ABSTRACTRecently, the suppression of boron diffusion due to both thermal and transient enhanced diffusion (TED) has been demonstrated through the incorporation of 0.5% substitutional carbon in the base of Si/SiGe/Si heterojunction transistor's (HBT)[1,2]. Because the devices are sensitive to diffusion on a scale less than that we can detect with SIMS, in this paper combined process and device modeling (TMA TSUPREM4 and MEDICI) are used to relate observed electrical characteristics (collector saturation currents and Early voltages) of the HBT's to boron diffusion, with a sensitivity of 20-30Å. Boron diffusivity in the SiGeC base is ~8 times slower than that of the boron diffusivity in the SiGe base without implant damage (no TED). In the case of ion implant damage in an overlying layer to cause TED the excess interstitial concentration due to ion implant damage is reduced by approximately 99% through incorporation of 0.5% substitutional carbon in the HBT SiGe bases. This demonstrates that carbon incorporation acts as an effective sink for interstitials.

Sign in / Sign up

Export Citation Format

Share Document