The Gel Route to TiO2 Photoanodes

1986 ◽  
Vol 73 ◽  
Author(s):  
S. Doeuff ◽  
M. Henry ◽  
C. Sanchez
Keyword(s):  
Anatase Phase ◽  
Sol Gel ◽  
Thermal Stabilization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Sol Gel Process ◽  
Metal Organic ◽  
Random Dispersion ◽  
Organic Solutions ◽  
Gel Network

ABSTRACTCr3+ and Al3+ doped TiO2 can be easily made via the sol-gel process. Mixing the metal-organic solutions give rise to a random dispersion of the doping ions into the TiO2 network. Amorphous and crystalline phases have been characterized all the way from the gel to the crystalline products by thermal analysis, X-ray diffraction, vibrational spectroscopy and E.S.R. Organic groups appear to be involved in the formation of the gel network and could lead to a better control of the morphology of the xerogel. A thermal stabilization of the anatase phase, up to 900°C, is observed when Cr3+ is introduced as a dopant. This would lead to the preparation of anatase TiO2 photoanodes.

Self-cleaning Cotton Fabrics

2006 ◽  
Vol 920 ◽  
Author(s):  
Kaihong Qi ◽  
Walid A Daoud ◽  
John Xin ◽  
C.L. Mak
Keyword(s):  
Titanium Dioxide ◽  
Ambient Pressure ◽  
Anatase Phase ◽  
Sol Gel ◽  
Cotton Fabrics ◽  
X Ray Diffraction ◽  
X Ray ◽  
Titanium Dioxide Films ◽  
Sol Gel Process ◽  
Self Cleaning

AbstractNanocrystalline anatase titanium dioxide films were successfully produced on cotton fabrics from alkoxide solutions under ambient pressure using the low temperature sol-gel process. At a temperature as low as 40°C, only anatase phase formed from X-ray diffraction spectroscopy (XRD). Field scanning electron microscopy (FESEM) images show the formation of uniform continuous films of titanium dioxide on cotton fabrics. The self-cleaning properties of these fabrics were evaluated by measuring anti-bacterial activities and the decomposition of a colorant Neolan Blue 2G. The results indicated that anatase treated cotton fabrics exhibited good self-cleaning performance.

Preparation and Property Characterization of Oriented PLZT Thin Films Processed Using Sol-Gel Method

1994 ◽  
Vol 343 ◽  
Author(s):  
Dae Sung Yoon ◽  
Chang Jung Kim ◽  
Joon Sung Lee ◽  
Chaun Gi Choi ◽  
Won Jong Lee ◽  
...  
Keyword(s):  
Thin Films ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
X Ray ◽  
Heat Treated ◽  
Insertion Method ◽  
Metal Organic ◽  
Dielectric And Optical Properties ◽  
Plzt Thin Films ◽  
Organic Solutions

ABSTRACTHighly preferentially oriented lead lathanum zirconate titanate(PLZT) thin films were fabricated on various substrates using the spin coating of metal organic solutions having the composition of (9/50/50) and (10/0/100). The substrates used in this study were SrTiO3(100), MgO(100), r-plane sapphire, PLT-coated glass, and Pt/Ti/MgO substrates. The films were heat-treated at 600°C and 700°C using the direct insertion method. The phases and the orientation of the PLZT thin films were examined using X-ray diffraction(XRD). Pole figure and X-ray rocking curves were measured to study the film orientation. The films were grown with (100), (110), and (001) plane being parallel to the surfaces of SrTiO3, sapphire, and Pt/Ti/MgO, respectively. The dielectric and optical properties of both the oriented films and the noncrystalline films were measured and discussed.

Luminescent Properties of Zn2SiO4:Eu3+,Dy3+ Phosphors via Sol-Gel Process

2012 ◽  
Vol 217-219 ◽  
pp. 733-736
Author(s):  
Xiu Mei Han ◽  
Shu Ai Hao ◽  
Ying Ling Wang ◽  
Gui Fang Sun ◽  
Xi Wei Qi
Keyword(s):  
Thermal Analysis ◽  
Ir Spectra ◽  
Sol Gel ◽  
Luminescent Properties ◽  
Photoluminescence Spectra ◽  
X Ray Diffraction ◽  
X Ray ◽  
Sol Gel Process ◽  
Ft Ir

Zn2SiO4:Eu3+, Dy3+ phosphors have been prepared through the sol-gel process. X-ray diffraction (XRD), thermogravimetric and ddifferential thermal analysis (TG-DTA), FT-IR spectra and photoluminescence spectra were used to characterize the resulting phosphors. The results of XRD indicated that the phosphors crystallized completely at 1000oC. In Zn2SiO4:Eu3+,Dy3+ phosphors, the Eu3+ and Dy3+ show their characteristic red(613nm, 5D0-7F2), blue (481nm, 4F9/2–6H15/2) and yellow (577nm, 4F9/2–6H13/2) emissions.

Sol-Gel derived Bi4-xNdxTi3O12 Thin Films and Their Characterization

2002 ◽  
Vol 737 ◽  
Author(s):  
R.E. Melgarejo ◽  
M.S. Tomar ◽  
A. Hidalgo ◽  
R.S. Katiyar
Keyword(s):  
Thin Films ◽  
Spin Coating ◽  
Bismuth Titanate ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
X Ray ◽  
Complete Solid Solution ◽  
Sol Gel Process ◽  
Ferroelectric Memory ◽  
Initial Results

ABSTRACTNd substituted bismuth titanate Bi4-xNdxTi3O12 were synthesized by sol-gel process and thin films were deposited on Pt substrate (Pt/TiO2/SiO2/Si) by spin coating. Thin films, characterized by X-ray diffraction and Raman spectroscopy, shows complete solid solution up to the composition x < 1. Initial results indicate that the ferroelectric polarization increases with increasing Nd content in the film with 2Pr = 50μC/cm2 for x = 0.46, which may have application in non-volatile ferroelectric memory devices.

Synthesis and Characterizations of Strontium Substituted Hydroxyapatite Thin Films

2010 ◽  
Vol 93-94 ◽  
pp. 231-234
Author(s):  
B. Hongthong ◽  
Satreerat K. Hodak ◽  
Sukkaneste Tungasmita
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Chemical Composition ◽  
Spin Coating ◽  
Phase Structure ◽  
Sol Gel ◽  
Cross Linking ◽  
X Ray Diffraction ◽  
X Ray ◽  
Sol Gel Process

Strontium substituted hydroxyapatite(SrHAp) were fabricated both in the form of powder as reference and thin film by using inorganic precursor reaction. The sol-gel process has been used for the deposition of SrHAp layer on stainless steal 316L substrate by spin coating technique, after that the films were annealed in air at various temperatures. The chemical composition of SrHAp is represented (SrxCa1-x)5(PO4)3OH, where x is equal to 0, 0.5 and 1.0. Investigations of the phase structure of SrHAp were carried out by using X-ray diffraction technique (XRD). The results showed that strontium is incorporated into hydroxyapatite where its substitution for calcium increases in the lattice parameters, and Sr3(PO4)2 can be detected at 900°C. The SEM micrographs showed that SrHAp films exhibited porous structure before develop to a cross-linking structure.

Low-Temperature Synthesis of Nano-Crystalline ZnTiO3 Powders by Aqueous Sol-Gel Process

2014 ◽  
Vol 543-547 ◽  
pp. 3741-3744
Author(s):  
Quan Jing Mei ◽  
Cong Ying Li ◽  
Jing Dong Guo ◽  
Gui Wang ◽  
Hai Tao Wu
Keyword(s):  
Sol Gel ◽  
Zinc Nitrate ◽  
X Ray Diffraction ◽  
Low Temperature Synthesis ◽  
Temperature Synthesis ◽  
Calcination Process ◽  
X Ray ◽  
Nano Crystalline ◽  
Transmission Electron ◽  
Sol Gel Process

The ecandrewsite-type ZnTiO3was successfully synthesized by the aqueous sol-gel method using TiO2dioxide and zinc nitrate as starting materials instead of expensive organic solvent and metal alkoxides. The as-prepared nanopowders were characterized by X-ray diffraction (XRD), differential thermal analysis (DTA) and transmission electron microscopy (TEM), respectively. The results showed that the calcination process of gel consisted of a series of oxidation and combustion reactions, accompanied by significantly exothermal effects. Highly reactive nanosized ZnTiO3powders were successfully obtained at 850 °C with particle size ~50 nm. By comparison, the aqueous sol-gel process was the most effective and least expensive technique used for the preparation of ZnTiO3nanopowders.

Preparation of YBCO Superconducting Films by Sol-Gel Process

2007 ◽  
Vol 546-549 ◽  
pp. 2007-2010
Author(s):  
Gao Yang Zhao ◽  
Huang Li Zhang ◽  
Ren Zhong Xue ◽  
Yuan Qing Chen ◽  
Li Lei
Keyword(s):  
Sol Gel ◽  
Precursor Solution ◽  
Superconducting Films ◽  
Superconducting Transition ◽  
X Ray Diffraction ◽  
Organic Salts ◽  
Ybco Films ◽  
X Ray ◽  
Sol Gel Process ◽  
Ybco Superconducting Films

precursor solution was prepared using barium trifluoroacetae (Ba-TFA) and non-fluorine yttrium (Y) and copper (Cu) organic salts. The precursor solution was modified by benzalacetone (BzAcH), in which the Cu2+ were chelated with BzAcH, which preventing the loss of Cu in the pyrolysis process. Dense YBCO superconducting films with smooth surface, which confirmed by scanning electron microscopy (SEM), were repeatedly obtained through sol-gel process. X-ray diffraction (XRD) 2θ scanning and φ scanning indicated that the as-prepared YBCO films had good c-axis texture. YBCO films with superconducting transition temperature (TC) above 89K were obtained.

Study on the Synthesis of Nano-Crystalline Mg2SiO4 Powders by Aqueous Sol-Gel Process

2013 ◽  
Vol 538 ◽  
pp. 142-145 ◽  
Author(s):  
X.F. Chen ◽  
J. Li ◽  
T.T. Feng ◽  
Y.S. Jiang ◽  
X.H. Zhang ◽  
...  
Keyword(s):  
Thermal Analysis ◽  
Sol Gel ◽  
Magnesium Nitrate ◽  
Metal Alkoxides ◽  
X Ray Diffraction ◽  
Calcination Process ◽  
X Ray ◽  
Nano Crystalline ◽  
Sol Gel Process ◽  
Scanning Electron

The forsterite-structure Mg2SiO4 was successfully synthesized by the aqueous sol-gel method using Si sols dioxide and magnesium nitrate as starting materials instead of expensive organic solvent and metal alkoxides. The as-prepared nanopowders were characterized by X-ray diffraction (XRD), differential thermal analysis (DTA) and scanning electron microscope (SEM), respectively. The results showed that the calcination process of gel consisted of a series of oxidation and combustion reactions, accompanied by significantly exothermal effects. Highly reactive nanosized Mg2SiO4 powders were successfully obtained at 850 °C with particle size of 60~80 nm.

Bicontinuous nanodisc and nanospherical titania materials prepared by sol-gel process in reverse microemulsion

2012 ◽  
Vol 66 (3) ◽  
Author(s):  
Khaled Haouemi ◽  
Fathi Touati ◽  
Néji Gharbi
Keyword(s):  
Sol Gel ◽  
Textural Properties ◽  
Rutile Phase ◽  
X Ray Diffraction ◽  
X Ray ◽  
Tio2 Particles ◽  
Sol Gel Process ◽  
Bet Method ◽  
Reverse Microemulsions ◽  
Different Shapes

AbstractTiO2 nanoparticles with different shapes and sizes were synthesised by the sol-gel route in Water/Brij78/Hexane reverse microemulsions. The aqueous cores of these microemulsions were used as nanoreactors to control sol-gel reactions. We studied the effect of water/surfactant mole ratio (W 0) on the morphology, and textural properties of the final products. The materials thus obtained were characterised by different techniques. Thermogravimetric and differential thermal analysis (TG-DTA) was used to study the thermal behaviour of the products and X-ray diffraction (XRD) to identify the crystalline phases. The morphological and textural properties of the products were determined by scattering electron microscopy (SEM) and the Brunauer-Emmett-Teller (BET) method, respectively. We also studied the influence of thermal treatment on the structure and size of the TiO2 particles. The effect of W 0 on the anatase-rutile phase transition temperature was investigated.

Facile Synthesis of Cu2SnSe3 Thin Film via Sol-Gel Process

2014 ◽  
Vol 1004-1005 ◽  
pp. 774-777 ◽  
Author(s):  
Ji Wan Liu ◽  
Gui Lin Chen ◽  
Wei Feng Liu ◽  
Guo Shun Jiang ◽  
Chang Fei Zhu
Keyword(s):  
Low Cost ◽  
Sol Gel ◽  
Soda Lime ◽  
Soda Lime Glass ◽  
X Ray Diffraction ◽  
X Ray ◽  
Absorbance Spectroscopy ◽  
Sol Gel Process ◽  
Ar Gas ◽  
Pure Cu

A low-cost non-vacuum process for fabrication of Cu2SnSe3 film by sol-gel method and knife-coating process is described. First, a certain amount of Copper (I) chloride and tin (IV) tetrachloride was dissolve into the mixture of water and alcohol and then some Polyvinyl Pyrrolidone (PVP) was added to the solution to obtain based colloidal solution. Next, precursor thin layer was deposited by knife-blading technique on soda-lime glass (SLG). Finally, precursor layer was annealed at selenium flow atmosphere carried by Ar gas at 550oC. Through X-ray diffraction (XRD) and Raman spectra, it is found that pure Cu2SnSe3 film was prepared successfully. Scanning electron microscopy (SEM) and UV–vis–NIR absorbance spectroscopy were used to characterize its morphology and optical bandgap.

Sign in / Sign up

Export Citation Format

Share Document