Sol-gel synthesis and characterization of CuO–based nanosystems

2002 ◽  
Vol 737 ◽  
Author(s):  
Lidia Armelao ◽  
Davide Barreca ◽  
Manuel Bertapelle ◽  
Gregorio Bottaro ◽  
Cinzia Sada ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Copper Acetate ◽  
Dip Coating ◽  
Silica Matrix ◽  
Synthesis And Characterization ◽  
Host Matrix ◽  
X Ray ◽  
Sol Gel Synthesis

ABSTRACTThis paper is focused on the sol-gel synthesis and characterization of CuO-based nanosystems both in the form of supported films and as guest nanoclusters embedded in a silica matrix. In both cases copper acetate (Cu(CH3COO)2 · H2O) was used as Cu source and, for the CuO :SiO2 nanocomposite systems, tetraethoxysilane (Si(OC2H5)4, TEOS) was adopted as silica precursor. Films were obtained by a dip-coating procedure and subsequently treated in air between 100 and 900°C. The system evolution on thermal annealing was studied by X-ray photoelectron spectroscopy (XPS), Glancing-Incidence X-ray diffraction (GIXRD) and optical absorption. Irrespective of the processing conditions, the formation of tenorite (CuO) crystallites with nanometric dimension was observed. In the nanocomposite samples, copper was homogeneously distributed in the host matrix and stable CuO nanoclusters (φ ≈ 15 nm) were obtained.

Sol–Gel Synthesis and Yellow Luminescent Properties of Zn2SiO4 :V Nanophosphor Materials

2019 ◽  
Vol 14 (12) ◽  
pp. 1796-1803
Author(s):  
Jaber El Ghoul ◽  
Naglaa Abdel All
Keyword(s):  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Visible Region ◽  
Luminescent Properties ◽  
Structural Morphology ◽  
Host Matrix ◽  
X Ray ◽  
Transmission Electron ◽  
Color Tunable ◽  
Sol Gel Synthesis

Pure Zn2SiO4 and Vanadium doped Zn2SiO4 green nanophosphor materials were synthesized using sol–gel method and thermally annealed at 1500 °C. The structural, morphology and optical properties were characterized using various techniques; X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Scanning electron microscope (SEM), high resolution transmission electron microscopy (HTEM), and photoluminescence spectroscopy (PL). XRD results shown β-Zn2SiO4 phase with triclinic structure that obtained after the heat treatment of samples at 1500 °C. The PL spectrum of V-Zn2SiO4 shows an intensive emission band in the visible region centered at 526 nm. This band is related to presence of vanadium in the interfaces between Zn2SiO4 nanoparticles and the host matrix, SiO2. The interesting of these nanophosphors were attributed for its capability of showing color-tunable emissions in visible region under a single-wavelength excitation.

Characterization of ordered mesoporous films on silicon (001) surface using X-ray and electron diffraction

2005 ◽  
Vol 38 (1) ◽  
pp. 211-216 ◽  
Author(s):  
Pang-Hung Liu ◽  
Kuei-Jung Chao ◽  
Xing-Jian Guo ◽  
Kuo-Ying Huang ◽  
Yen-Ru Lee ◽  
...  
Keyword(s):  
Electron Diffraction ◽  
Sol Gel ◽  
Dip Coating ◽  
Silica Film ◽  
Continuous Film ◽  
X Ray ◽  
Transmission Electron ◽  
Ordered Mesoporous ◽  
Direction Dependence

A continuous silica film with well aligned mesochannels parallel to the Si(001) surface was found to be formed through sol–gel dip-coating of a silica precursor with nonionic ethylene oxide surfactant. Two two-dimensional mesoporous structures in centered and non-centered rectangular symmetries and with the short axes of elongated ellipsoidal pores normal to the surface were observed by X-ray and electron diffraction. Detailed transmission electron microscopy investigations were employed to view the direction dependence of the channel or pore packing in the continuous film.

Preparation and characterization of V2O5 doped SiO2-TiO2 thin films

2012 ◽  
Vol 2 (1) ◽  
Author(s):  
Marek Nocuń ◽  
Sławomir Kwaśny
Keyword(s):  
Thin Films ◽  
Band Gap ◽  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Dip Coating ◽  
Band Gap Energy ◽  
Tio2 Thin Films ◽  
Glass Substrates ◽  
Gel Technique

AbstractIn our investigation, V doped SiO2/TiO2 thin films were prepared on glass substrates by dip coating sol-gel technique. Chemical composition of the samples was studied by X-ray photoelectron spectroscopy (XPS). Transmittance of the samples was characterized using UV-VIS spectrophotometry. Subsequently band-gap energy (Eg) was estimated for these films. Powders obtained from sols were characterized by FTIR spectroscopy. It was found that vanadium decreases optical band gap of SSiO2/TiO2 films.

scholarly journals Microwave treated sol–gel synthesis and characterization of hybrid ZnS–RGO composites for efficient photodegradation of dyes

2017 ◽  
Vol 41 (4) ◽  
pp. 1723-1735 ◽  
Author(s):  
Lellala Kashinath ◽  
Keerthiraj Namratha ◽  
Shivanna Srikantaswamy ◽  
Ajayan Vinu ◽  
Kullaiah Byrappa
Keyword(s):  
Electron Transfer ◽  
Photocatalytic Activity ◽  
Sol Gel ◽  
Charge Recombination ◽  
Synthesis And Characterization ◽  
Excellent Photocatalytic Activity ◽  
Sol Gel Synthesis

Excellent photocatalytic activity by highly photo-responsive electron transfer from ZnS–RGO, and RGO acts as an electron reservoir and effectively suppresses charge recombination.

Synthesis and characterization of homogeneous lead-substituted tin oxide with the (110) face of rutile structure

2000 ◽  
Vol 15 (10) ◽  
pp. 2076-2079
Author(s):  
Chika Nozaki ◽  
Takashi Yamada ◽  
Kenji Tabata ◽  
Eiji Suzuki
Keyword(s):  
Electron Microscopy ◽  
Tin Oxide ◽  
Photoelectron Spectroscopy ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Rutile Structure ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

Synthesis of a rutile-type lead-substituted tin oxide with (110) face was investigated. The characterization was performed by x-ray diffraction, scanning electron microscopy, transmission electron microscopy, energy dispersive x-ray spectroscopy, infrared spectroscopy, x-ray photoelectron spectroscopy, and Brunauer–Emmett–Teller surface area measurements. The homogeneous rutile-type lead-substituted tin oxide was obtained until 4.1 mol% of tin was substituted with lead. The surface of obtained oxide had a homogeneously lead-substituted (110) face.

Sol–gel synthesis of highly pure α-Al2O3 nano-rods from a new class of precursors of salicylaldehyde-modified aluminum(iii) isopropoxide. Crystal and molecular structure of [Al(OC6H4CHO)3]

RSC Advances ◽  
2014 ◽  
Vol 4 (57) ◽  
pp. 30081-30089 ◽  
Author(s):  
Anita Raj Sanwaria ◽  
Meena Nagar ◽  
Rakesh Bohra ◽  
Archana Chaudhary ◽  
Shaikh M. Mobin ◽  
...  
Keyword(s):  
Molecular Structure ◽  
Crystal And Molecular Structure ◽  
Sol Gel ◽  
Synthesis And Characterization ◽  
New Class ◽  
Nano Rods ◽  
Α Al2o3 ◽  
Sol Gel Synthesis

Synthesis and characterization of salicylaldehyde-modified aluminum(III) isopropoxide, [(OPri)3−nAl(OC6H4CHO)n] precursors used for sol–gel synthesis of α-Al2O3 nano-rods.

Sol-gel synthesis and characterization of Ag nanoparticles in ZrO2 thin films

2009 ◽  
Vol 24 (8) ◽  
pp. 2541-2546 ◽  
Author(s):  
Eisuke Yokoyama ◽  
Hironobu Sakata ◽  
Moriaki Wakaki
Keyword(s):  
Thin Films ◽  
Sol Gel ◽  
Composite Films ◽  
Dip Coating ◽  
Molar Ratio ◽  
X Ray Diffraction ◽  
Silver Surface ◽  
Molar Ratios ◽  
Sol Gel Synthesis

ZrO2 thin films containing silver nanoparticles were prepared using the sol-gel method with Ag to Zr molar ratios [Ag]/[Zr] = 0.11, 0.25, 0.43, 0.67, 1.00, 1.50, and 2.33. After dip coating on glass substrate, coated films were annealed at 200 and 300 °C in air. X-ray diffraction peaks corresponding to crystalline Ag were observed, but a specific peak corresponding to ZrO2 was not observed. At the molar ratio [Ag]/[Zr] = 0.25, the particle size of Ag distributed broadly centered at 17 nm for an annealing temperature of 200 °C and at 25 nm for 300 °C. The films annealed in air at 200 °C showed an absorption band centered at 450 nm because of the silver surface plasmon resonance, whereas films heated at 300 °C in air caused a red shift of the absorption to 500 nm. The absorption peak was analyzed using the effective dielectric function of Ag-ZrO2 composite films modeled with the Maxwell-Garnett expression.

Sign in / Sign up

Export Citation Format

Share Document