scholarly journals Designing a structure of the magnetically active part of dipole electromagnets for the system of vertical convergence-separation of beams

2021 ◽  
Vol 2 (5 (110)) ◽  
pp. 14-22
Author(s):  
Andriy Getman
Keyword(s):  
Magnetic Field ◽  
Magnetic Induction ◽  
Homogeneous Magnetic Field ◽  
Heavy Ion ◽  
Active Part ◽  
Dipole Magnet ◽  
Assigned Value ◽  
Magnetic Parameters ◽  
The Third ◽  
The Stability

This paper reports the results of calculating the magnetic parameters for a direct dipole magnet in the system of vertical convergence-separation of particle beams of the upper and lower rings of the heavy-ion collider. An optimized variant of the yoke and superconducting winding structures has been obtained, providing for the assigned value of a homogeneous magnetic field inside the aperture at the minimized contributions of higher-order harmonics, average-integral along the length. The results from the analysis of the transverse projections of the magnetic induction obtained by 2D modeling of two variants of the design of the central cross-section of the dipole electromagnet are presented. The analysis results have established the dependence of the stability of magnetic parameters in the aperture of the electromagnet when the current in the winding changes on the volume of those yoke regions whose magnetization value is close to saturation. A 3D model of the magnetically active part has been built for two variants of the electromagnet design, and the values of the average-integral harmonics of transverse projections of magnetic induction in the aperture have been calculated. The relationship between the third average-integral harmonic of magnetic induction and the size lengths of the yoke and winding has been empirically established, making it possible to correct the heterogeneity of the transverse magnetic field in the aperture of the electromagnet. The results of optimization of the structure of the magnetically active part of the electromagnet are presented on the criteria for a minimum of the values of the average-integral coefficients of magnetic induction, carried out on the basis of correction of the initial geometric parameters of the yoke and winding. An improvement in the stability of magnetic parameters has been demonstrated, by 3 times, as well as a two-fold reduction in the contribution to the heterogeneity by the third average-integral harmonic when using a two-row arrangement of the winding turns inside the yoke in the design of the electromagnet

Analysis of magneto rheological elastomers for energy harvesting systems

2020 ◽  
Vol 64 (1-4) ◽  
pp. 439-446
Author(s):  
Gildas Diguet ◽  
Gael Sebald ◽  
Masami Nakano ◽  
Mickaël Lallart ◽  
Jean-Yves Cavaillé
Keyword(s):  
Magnetic Field ◽  
Energy Harvesting ◽  
Shear Strain ◽  
Magnetic Induction ◽  
Magnetic Particles ◽  
Homogeneous Magnetic Field ◽  
Electrical Signal ◽  
Harvesting Systems ◽  
Dc Bias ◽  
Magneto Rheological

Magneto Rheological Elastomers (MREs) are composite materials based on an elastomer filled by magnetic particles. Anisotropic MRE can be easily manufactured by curing the material under homogeneous magnetic field which creates column of particles. The magnetic and elastic properties are actually coupled making these MREs suitable for energy conversion. From these remarkable properties, an energy harvesting device is considered through the application of a DC bias magnetic induction on two MREs as a metal piece is applying an AC shear strain on them. Such strain therefore changes the permeabilities of the elastomers, hence generating an AC magnetic induction which can be converted into AC electrical signal with the help of a coil. The device is simulated with a Finite Element Method software to examine the effect of the MRE parameters, the DC bias magnetic induction and applied shear strain (amplitude and frequency) on the resulting electrical signal.

Magneto-gravitational convection in a vertical layer of ferrofluid in a uniform oblique magnetic field

2016 ◽  
Vol 795 ◽  
pp. 847-875 ◽  
Author(s):  
Habibur Rahman ◽  
Sergey A. Suslov
Keyword(s):  
Magnetic Field ◽  
Computational Cost ◽  
Three Dimensional ◽  
Vertical Layer ◽  
Gravitational Convection ◽  
Magnetic Parameters ◽  
Instability Modes ◽  
The Stability ◽  
Dimensional Instability ◽  
Oblique Magnetic Field

The stability of base gravitational convection in a layer of ferrofluid confined between two vertical wide and tall non-magnetic plates, heated from one side, cooled from the other and placed in a uniform oblique external magnetic field is studied. Two distinct mechanisms, thermo-gravitational and thermo-magnetic, are found to be responsible for the appearance of various stationary and wave-like instability modes. The characteristics of all instability modes are investigated as functions of the orientation angles of the applied magnetic field and its magnitude for various values of magnetic parameters when both the thermo-magnetic and gravitational buoyancy mechanisms are active. The original three-dimensional problem is cast in an equivalent two-dimensional form using generalised Squire’s transformations, which significantly reduces a computational cost. Subsequently, full three-dimensional instability patterns are recovered using the inverse Squire’s transformation, and the optimal field and pattern orientations are determined.

GRAVITATIONAL AND MAGNETIC CONVECTION IN MAGNETIC FLUID

2005 ◽  
Vol 19 (07n09) ◽  
pp. 1367-1373
Author(s):  
A. A. BOZHKO ◽  
G. F. PUTIN
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Solid Phase ◽  
Fluid Flows ◽  
Homogeneous Magnetic Field ◽  
Temperature Sensors ◽  
Cylindrical Layer ◽  
Temperature Sensitive ◽  
Concentration Gradients ◽  
The Stability

Experiments were performed to examine the influence of external homogeneous magnetic field on ferrofluid convection in thin cylindrical layer heated from one wide sidewall and cooled from another. Gravitational and magnetic mechanisms of convection as well as the influence of gravitational sedimentation of particles and their aggregates on stability and structure of fluid flows are studied. The integral and local temperature sensors were used for measurement of heat transport across the layer. Visualization of flow patterns was provided by a temperature-sensitive liquid crystal sheet. The results indicate that with the help of a magnetic field it is possible to control the stability and the form of convection motions. Besides, the concentration gradients of solid phase can have material role to convection instability and heat transfer.

Formation of a homogeneous magnetic field in spectrometer dipole magnet using permanent magnet

1992 ◽  
Vol 28 (1) ◽  
pp. 568-570 ◽  
Author(s):  
V.D. Borisov ◽  
V.S. Kashikhin ◽  
E.A. Lamzin ◽  
S.P. Potekhin ◽  
Y.P. Severgin ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Permanent Magnet ◽  
Homogeneous Magnetic Field ◽  
Dipole Magnet

scholarly journals Stability and Convergence Analysis of a Biomagnetic Fluid Flow Over a Stretching Sheet in the Presence of a Magnetic Field

Symmetry ◽  
2020 ◽  
Vol 12 (2) ◽  
pp. 253
Author(s):  
Md. Ghulam Murtaza ◽  
Efstratios Emmanouil Tzirtzilakis ◽  
Mohammad Ferdows
Keyword(s):  
Magnetic Field ◽  
Convergence Analysis ◽  
Stretching Sheet ◽  
Stability And Convergence ◽  
Flow Profile ◽  
Magnetic Parameters ◽  
Electrically Conducting ◽  
Stability And Convergence Analysis ◽  
The Stability ◽  
Biomagnetic Fluid

This investigated the time-dependent, two-dimensional biomagnetic fluid (blood) flow (BFD) over a stretching sheet under the action of a strong magnetic field. Blood is considered a homogeneous and Newtonian fluid, which behaves as an electrically conducting magnetic fluid that also exhibits magnetization. Thus, a full BFD formulation was considered by combining both the principles of magnetization and the Lorentz force, which arise in magnetohydrodynamics and ferrohydrodynamics. The non-linear governing equations were transformed by using the usual non-dimensional variables. The resulting system of partial differential equations was discretized by applying a basic explicit finite differences scheme. Moreover, the stability and convergence analysis were performed to obtain restrictions that were especially for the magnetic parameters, which are of crucial importance for this problem. The acquired results are shown graphically and were examined for several values of the dimensionless parameters. The flow and temperature distributions were increased as the values of the magnetic parameters were increased. With the progression in time, the flow profile and temperature distribution were also increased. It is hoped that the results of this problem will be used for high targeting efficiency toward determining the maximum values of magnetic field for which accurate flow predictions could be made using a very simple numerical scheme.

Notizen: Effect of Magnetic Field on Ascorbic Acid Oxidase Activity, I

1986 ◽  
Vol 41 (3) ◽  
pp. 355-358 ◽  
Author(s):  
V. S. Ghole ◽  
P. S. Damle ◽  
W. H.-P. Thiemann
Keyword(s):  
Magnetic Field ◽  
Ascorbic Acid ◽  
Homogeneous Magnetic Field ◽  
Acid Oxidase ◽  
High Substrate Concentration ◽  
Ascorbic Acid Oxidase ◽  
Rate Of Reaction ◽  
Substrate Concentrations ◽  
Burk Plot

A homogeneous magnetic field of 1.1 T strength exhibits a significant influence on the activity of the enzyme ascorbic acid oxidase in vitro. A Lineweaver-Burk plot of the reaction shows the typical pattern of a mixed-type inhibition, i.e. a larger rate of reaction at low substrate concentrations and a smaller rate of reaction at high substrate concentration than that of the control without magnetic field applied.

scholarly journals Stability of nonaxisymmetric ferrofluid flow in rotating cylinders with magnetic field

2005 ◽  
Vol 2005 (23) ◽  
pp. 3727-3737 ◽  
Author(s):  
Jitender Singh ◽  
Renu Bajaj
Keyword(s):  
Magnetic Field ◽  
Applied Magnetic Field ◽  
Critical Value ◽  
Annular Space ◽  
Rotating Cylinders ◽  
The Stability

Effect of an axially applied magnetic field on the stability of a ferrofluid flow in an annular space between two coaxially rotating cylinders with nonaxisymmetric disturbances has been investigated numerically. The critical value of the ratioΩ∗of angular speeds of the two cylinders, at the onset of the first nonaxisymmetric mode of disturbance, has been observed to be affected by the applied magnetic field.

Sign in / Sign up

Export Citation Format

Share Document