Bit-Error-Rate Degradation Due to Inter-Channel Crosstalk of Different Signal Format

2019 ◽  
Vol E102.B (5) ◽  
pp. 1000-1004
Author(s):  
Naruki SHINOHARA ◽  
Koji IGARASHI ◽  
Kyo INOUE
Keyword(s):  
2020 ◽  
Vol 25 (2) ◽  
pp. 86-97
Author(s):  
Sandy Suryo Prayogo ◽  
Tubagus Maulana Kusuma

DVB merupakan standar transmisi televisi digital yang paling banyak digunakan saat ini. Unsur terpenting dari suatu proses transmisi adalah kualitas gambar dari video yang diterima setelah melalui proses transimisi tersebut. Banyak faktor yang dapat mempengaruhi kualitas dari suatu gambar, salah satunya adalah struktur frame dari video. Pada tulisan ini dilakukan pengujian sensitifitas video MPEG-4 berdasarkan struktur frame pada transmisi DVB-T. Pengujian dilakukan menggunakan simulasi matlab dan simulink. Digunakan juga ffmpeg untuk menyediakan format dan pengaturan video akan disimulasikan. Variabel yang diubah dari video adalah bitrate dan juga group-of-pictures (GOP), sedangkan variabel yang diubah dari transmisi DVB-T adalah signal-to-noise-ratio (SNR) pada kanal AWGN di antara pengirim (Tx) dan penerima (Rx). Hasil yang diperoleh dari percobaan berupa kualitas rata-rata gambar pada video yang diukur menggunakan metode pengukuran structural-similarity-index (SSIM). Dilakukan juga pengukuran terhadap jumlah bit-error-rate BER pada bitstream DVB-T. Percobaan yang dilakukan dapat menunjukkan seberapa besar sensitifitas bitrate dan GOP dari video pada transmisi DVB-T dengan kesimpulan semakin besar bitrate maka akan semakin buruk nilai kualitas gambarnya, dan semakin kecil nilai GOP maka akan semakin baik nilai kualitasnya. Penilitian diharapkan dapat dikembangkan menggunakan deep learning untuk memperoleh frame struktur yang tepat di kondisi-kondisi tertentu dalam proses transmisi televisi digital.


2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Jesuwanth Sugesh Ramesh Gabriel ◽  
Sivasubramanian Arunagiri

AbstractIn this paper, we report the performance of a carrier depletion Silicon PIN phase shifter with over layer of 130 nm. It is observed that an optimum intrinsic gap of 250 nm for a device length of 5 mm at 2 V, resulted in Extinction Ratio (ER) of 23.41 dB and Bit Error Rate (BER) of 1.00 × 10−7 is obtained for 50 Gbps. The phase shifter is also designed for length 2 mm with an intrinsic gap of 100 nm at an operating voltage <4 V. The study also reveals that the proposed design for Mach-Zehnder modulator operating at a data rate of 100 Gbps for the concentration of P = 7 × 1017 cm−3 and N = 5 × 1017 cm−3 gives better BER and phase performance. The proposed design was also analysed in an intra-data centre communication setup of fibre length 15 km.


2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Hocine Fekih ◽  
Boubakar Seddik Bouazza ◽  
Keltoum Nouri

AbstractRecently, using iterative decoding algorithms to achieve an interesting bit error rate for spectrally efficient modulation become a necessity for optical transmission, in this paper, we propose a coded modulation scheme based on bit interleaving circular recursive systematic convolutional (CRSC) code and 16-QAM modulation. The proposal system considered as a serial concatenation of a channel encoder, a bit interleaver and M-ary modulator can be flexible easy to implement using a short code length. For a spectral efficiency $\eta =3\text{bit}/s/Hz$, the coding gain at a bit error rate of 10−6 is about 8 dB.


2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Mahmoud M. A. Eid ◽  
Ahmed Nabih Zaki Rashed ◽  
Ehab Salah El-din

AbstractAim and scope of this study is to simulate the performance signature of optical inter satellite links based booster Erbium doped fiber amplifier (EDFA) and receiver preamplifiers. The study is simulated to demonstrated the effect of changing the propagation distances between satellites spacing based on the booster EDFA and receiver preamplifiers. Signal power amplitude, Max. Q factor, and min bit error rate are investigated against the input power variations.


Sign in / Sign up

Export Citation Format

Share Document