scholarly journals Formulation and in vitro evaluation of orodispersible tablets of fexofenadine hydrochloride

2020 ◽  
Vol 19 (5) ◽  
pp. 919-925
Author(s):  
Durgaramani Sivadasan ◽  
Muhammad Hadi Sultan ◽  
Osama Madkhali ◽  
Shamama Javed ◽  
Aamena Jabeen

Purpose: To develop orodispersible tablets (ODTs) of fexofenadine hydrochloride using three different superdisintegrants in various ratios and to compare their disintegration properties.Methods: Direct compression technique was used for the preparation of ODTs. Mannitol and Avicel CE-15 (microcrystalline cellulose and guar gum) were used as direct compression diluents. The disintegration time of tablets using each polymer (superdisintegrant) was evaluated as well as othertablet properties including weight fluctuation, hardness, friability, wetting time and water absorption ratio.Results: Satisfactory values were obtained for all the evaluated parameters. As the polymer concentration increased, there was a decrease in disintegration time. A comparison of the three different polymers used revealed that CCM3 formulated with 12 % croscarmellose sodium and 14.66 % lactose had the least disintegration time of 32.33 ± 3.23 s. In vitro release studies showed that the maximum drug release of 94.38 ± 0.12 % in 25 min was obtained for ODT tablets containing croscarmellose sodium (CCM3).Conclusion: The orodispersible tablets had quick disintegrating property which was achieved using superdisintegrants. Thus, superdisintegrants improve the disintegration efficiency of orodispersible fexofenadine tablets at low concentrations, when compared to traditional disintegrants. Keywords: Croscarmellose sodium, Direct compression, Fexofenadine, Orodispersible tablets

2021 ◽  
Vol 11 (5) ◽  
pp. 115-120
Author(s):  
Kritika Rai ◽  
Vivek Jain ◽  
Sunil Kumar Jain ◽  
Pushpendra Kumar Khangar

Orally disintegrating tablets (ODT) disintegrate quickly with saliva when administered into the oral cavity and taken without water or chewed. ODT are easy to take for children and the elderly, who may experience difficultly in taking ordinary oral preparations such as tablets, capsules, and powders.  The ODT threes substantial benefits for the patient (or elder) who cannot swallow (Dysphagia), or who is not permitted water intake due to disease. The reason of the current research was to prepare taste masking oral disintegrating tablets of poorly soluble lornoxicam (LXM) by direct compression technique using Kyron T-114 (cation exchange resin) as a taste masking agent. With in various ratios the Drug-resin of 1:4 was established to present best taste masking. The superdisintegrants used in formulation are croscarmellose sodium and cross povidone. Among these croscarmellose sodium demonstrated superior drug release. The tablets were evaluated for friability, weight variation, wetting time, hardness, disintegration time and uniformity of content. Optimized formulations were evaluated for in vitro dissolution test. Amongst all the formulations F-6 was found to be most successful tablets prepared by this technique had disintegration time of 30sec and % CDR 94.78 within 30min. Hence, this advance can be utilized for taste masking of bitter pharmaceutical ingredients leading to superior patient compliance. Keywords: Oral disintegration tablets, Lornoxicam, Kyron T-114, Superdisintegrants, Direct Compression.


1970 ◽  
Vol 2 (2) ◽  
pp. 59-65
Author(s):  
Abu Kalam Lutful Kabir ◽  
Shaikh Mukidur Rahman ◽  
Md Arshad Jahan ◽  
Abu Shara Shamsur Rouf

Difficulty in swallowing (dysphagia) is common among all age groups, especially in elderly and pediatrics. Mouth dissolving tablets constitute an innovative dosage forms that overcome the problems of swallowing and provides a quick onset of action. The purpose of this study was to formulate and evaluate mouth dissolving tablet of loratadine using a special preparation technology (pharmaburst Technology) with a super disintegrating agent (Croscarmellose sodium). Tablets were prepared by direct compression technique. The granules were evaluated for angle of repose, bulk density, tapped density, bulkiness, compressibility index and hausners ratio. The tablets were evaluated for hardness, thickness, uniformity of weight, friability, wetting time, water absorption ratio, disintegration time and drug content. In vitro release studies were performed using USP-II (paddle method) in 900ml of pH 1.2 at 50rpm. The physical properties of the prepared tablets did not show any significant variations and were found to have good physical integrity. Tablets prepared with pharmaburst B2 and Croscarmellose sodium showed a lesser disintegration time and wetting time of 27±0.10 and 38±0.13 seconds respectively. The best formulations were subjected to stability studies at 40ºC/75% RH for 60 days. Key words: Loratadine; pharmaburst B2; croscarmellose sodium; mouth dissolving tablets; direct compression.DOI: 10.3329/sjps.v2i2.5825Stamford Journal of Pharmaceutical Sciences Vol.2(2) 2009: 59-65


2018 ◽  
Vol 4 (1) ◽  
pp. 86-102 ◽  
Author(s):  
A. Acharya ◽  
G.B.K. Kumar ◽  
P. Goudanavar ◽  
K. Dhakal

Background: Recent developments in fast dissolving tablets have brought convenience in dosing to pediatric and elderly patients who have trouble in swallowing tablets.The main objective of the present study is to formulate fast dissolving tablet of Lornoxicam by direct compression method.Methods: Guar gum and crospovidone were used as natural and synthetic superdisintegrants respectively. Fast dissolving tablet of Lornoxicam were prepared by direct compression technique using three different approaches; superdisintegrant addition, sublimation, and solid dispersion.Results: IR and DSC studies showed no interaction between the drug and the excipients. All formulation showed disintegration time ranging from 16.09-42.54 second. Wetting time and disintegration time decreased by increasing the super disintegrant concentration from 2.5% to 5% w/w. Formulae L16 gave the best in- vitro disintegration and dissolution results, which would be due to swelling effect of Gaur gum and amorphization of the drug during the solid dispersion preparation.The best formulation L16 was subjected to stability testing for 3 month and results showed no significant change in appearance, hardness, drug content and dissolution profile of the tablets, hence tablet is stable throughout its stability studies.Conclusion: It was concluded that fast dissolving tablets of Lornoxicam were formulated successfully with desired characteristics which disintegrated rapidly; provided rapid onset of action; and enhanced the patient convenience and compliance.JMMIHS,2018;4(1):86-102


Author(s):  
S. P. Hiremath ◽  
Chidambar Makanapur

Objective: The rationale of the current work was to formulate and evaluate orodispersible tablets by direct compression technique with a vision to augment patient compliance and rapid onset of action.Methods: Nine orodispersible formulations of propranolol were formulated by direct compression method using sodium starch glycolate, crospovidone and croscarmellose sodium as the super disintegrants. The prepared formulations were evaluated for wetting time, drug content, in vitro disintegration time, dispersion time, dissolution time and also projected to kinetic treatment to know the pattern of drug release. Further, the discovered promising formulation was subjected to stability studies.Results: Based on the results obtained, formulation F9 containing6 mg of croscarmellose sodium exhibited good wetting time, dispersion time, and disintegration time and drug release compared to orodispersible tablets prepared with other super disintegrants. The stability studies piloted as per International Conference on Harmonisation guidelines on the promising formulationF9disclosedno significant changes in the colour (white), drug content (94.87±0.141 mg), hardness (2.93±0.18 kg/cm2), disintegration time (17.11±0.089 s), and drug release after 4 w. After 60 s, the percentage drug release of F9 was found to be 98.52 % and 96.30 % after 1 and 4 w, respectively.Conclusion: Orodispersible tablets of propranolol hydrochloride were formulated successfully by employing direct compression technique. From the investigation, it can be reasonably concluded that F9 batch orodispersible tablets of propranolol with 6 mg of crospovidone exhibited maximum cumulative drug release in 60 s.


Author(s):  
Sarika S. Malode ◽  
Milind P. Wagh

The objective of present work was to develop taste masked orodispersible tablets of mirabegron. Mirabegron is beta 3 adrenoceptor agonist used to treat overactive bladder. Overactive bladder (OAB) is defined as a symptom syndrome showing feeling of urgency to urinate, typically accompanied by frequent daytime and nocturnal urination, in the absence of proven infection or other obvious pathology. Over active bladders are generally common in geriatrics. Moreover, this drug has a very strong bitter taste. Frequent dosing requires frequent water intake, which further aggregates the condition of over active bladder and bitter taste of drug affects patient compliance. Hence a need arises to mask the bitter taste for development of an ODT which does not require consuming water with every dosage. In this work, the bitter taste of mirabegron was masked by forming a complex with an ion exchange resin tulsion 344. The drug resin complexation process was optimized for resin activation, drug: resin ratio, soaking time and stirring time. In –vitro release studies revealed complete drug elution from the complex within 10 minutes in pH 1.2 buffer. The taste-masked complex was then formulated into palatable orodispersible tablets using a direct compression approach by use of superdisintegrants to achieve a rapid disintegration. The tablets were evaluated for weight variation, hardness, friability, drug content, wetting time, In- vivo disintegration time and in-vitro dissolution time.


2018 ◽  
Vol 10 (5) ◽  
pp. 76
Author(s):  
Methaq Hamad Sabar ◽  
Iman Sabah Jaafar ◽  
Masar Basim Mohsin Mohamed

Objective: The aim of this study was to formulate ketoconazole (keto) as oral floating in situ gel to slow the release of keto in the stomach.Methods: Sodium alginate (Na alginate) was used as a primary polymer in the preparation of the in situ gel and was supported by the following polymers: guar gum (GG), hydroxypropyl methylcellulose (HPMC) K4M, K15M and carbapol 940 as viscosity enhancing agents. As a consequence, and to complete the gelation process of above formulations was by adding the calcium carbonate (CaCO3). The in situ gels were investigated by the following tests: floating lag time, floating duration, viscosity, drug content, in vitro gelling studies and in vitro release study.Results: The study showed that the faster release was obtained with F1 which contained Na alginate alone. Additionally, reduction in Na alginate concentration resulted in significant increase in drug release. It was also noted that the increase in GG (viscosity enhancing polymer) concentration resulted in non-significant decrease in percent drug release and the reduction in CaCO3 concentration led to significant increase in drug release. Moreover, the release of drug was also affected by grade of viscosity enhancing polymer, the faster release was observed with the formula which contained a polymer of low viscosity (HPMC K4M) and an opposite result was with the high viscosity polymer (HPMCK15M).Conclusion: This study showed the formulation of Na alginate with GG and CaCO3, led to gain floating in situ gel and a sustained release of keto. 


INDIAN DRUGS ◽  
2013 ◽  
Vol 50 (10) ◽  
pp. 39-46
Author(s):  
V Prakash ◽  
◽  
L. Keshri ◽  
V. Sharma ◽  
K. Pathak

The aim of the present study was to mask the bitter taste of oxybutynin chloride by lipid excipients and to develop its fast disintegrating tablet. For this purpose, a blend of two lipids, glyceryl behenate and glyceryl palmitostearate was utilized for taste masking by solvent evaporation method. The evaporation of solvent was accomplished by freeze drying and taste masked granules were characterized for their micromeritic and rheological properties. The state of dispersion was analyzed by SEM and DSC. Orodispersible tablets were then formulated (F1- F6) using Polyplasdone XL as extragranular superdisintegrant and evaluated for hardness, disintegration time, in vitro dissolution time and in vivo disintegration time. Results indicated that the formulation F6 exhibited minimum in vivo disintegration time of 8 sec with effective taste masking. In vitro release analysis indicated %DE10 and %DE25 of 51.48 and 76.53 respectively. Conclusively, taste masked orodispersible formulation of oxybutynin chloride was developed that could be beneficial for geriatric population.


2020 ◽  
Vol 10 (5) ◽  
pp. 240-250
Author(s):  
Vinay Pandit ◽  
Dipanker Kashive ◽  
Tarun Kumar Sharma

Objectives: Diabetes is a chronic disease and is a group of metabolic disorders characterized by high levels of sugar in blood (hyperglycemia). Hypertension is a major modifiable risk factor for cardiovascular morbidity and mortality in patients with diabetes. The objective of this research is to formulate Fast dissolving tablets of Pioglitazone and Cilnidipine for the effective treatment of diabetes induced hypertension. Methods: Six formulations were prepared by direct compression technique by using Opuntia ficus-indica as an innate superdisintegrant. Result and Discussion: All the formulations were subjected for precomprression, post compression parameters and shows all the data within the specific limits. F5 formulation with the mixture of polymers viz. Opuntia ficus indica, SSG, croscarmellose sodium, magnesium stearate, DiCOM showed comparatively fast disintegration and best release of drug than that of all other formulation. The tablets of F5 formulation disintegrated within 18.53 seconds can provide fast relief in the body. The in-vitro dissolution results revealed that the drug release of F5 formulation tablets was more than 90% for Pioglitazone and near to 70% for Cilnidipine within 30 minutes. Stability studies were performed on F5 formulation tablets showed no significant changes in color, disintegration time and in-vitro dissolution which showed that appearance of tablets was having no effect. Conclusion: Fast dissolving tablets of Pioglitazone and Cilnidipine can be successfully prepared using direct compression technique and it will enhance the drug dissolution, which will further increase absorption and bioavailability of both drugs. Keywords: Pioglitazone, Cilnidipine, diabetes induced hypertension, fast dissolving tablets, direct compression.


Author(s):  
Piplani Mona ◽  
Diwedi Rohini ◽  
Bhagwat Deepak Prabhakar ◽  
Pahwa Rakesh

The objective of present study was to compare the disintegration efficiency of mucilage isolated from Plantago ovata with commonly used synthetic superdisintegrant, croscarmellose sodium in the formulation of orally disintegrating tablets. Effects of varying concentration of both superdisintegrants on disintegration time were studied. Orally disintegrating tablets of metoclopramide hydrochloride were prepared using selected superdisintegrants by direct compression technique. Prepared tablets were evaluated for weight variation, thickness, hardness, friability, disintegration time, wetting time, water absorption ratio and dissolution test. Swelling index was also investigated for comparing the swelling property of croscarmellose sodium with mucilage of Plantago ovata. Swelling index of mucilage isolated from Plantago ovata was found to be greater (94 ± 2.5% v/v) when compared with croscarmellose sodium (85 ± 1.5% v/v). The present study indicated that mucilage isolated from natural source proved to be more effective for their disintegrating property than the most commonly used synthetic superdisintegrant, croscarmellose sodium.


2016 ◽  
Vol 46 (11) ◽  
pp. 2064-2069
Author(s):  
Tingting Yi

ABSTRACT: The purpose of the study was to prepare orally disintegrating tablets (ODTs) of mosapride citrate for dogs with fast disintegration and low cost. The ODTs were developed by varying the components and the ratio of excipients. A direct compression method was used. The properties of the ODTs, including hardness, friability, active ingredient content, and in vitro disintegration time, were investigated, and an economic analysis of the formulations was performed. For all formulations, friability was less than 1%, and the hardness varied from 37.69±4.08 to 48.73±5.62 N, which indicated that the tablets had sufficient mechanical integrity to withstand packaging and carrying. Results showed that Formulation (F) 2, containing 5% sodium carboxymethyl starch; F3, containing 5% low-substituted hydroxypropylcellulose; and F5 had not only shorter disintegration times but also lower costs, which were suitable for mosapride citrate ODTs. Although F1, contained 5% croscarmellose sodium, and F4, contained 5% crospovidone, with shorter disintegration times, the costs of F1 and F4 were 25.8% and 22.6% higher than that of F5, respectively. Results also revealed that the disintegration time of F5 was not significantly different from those of F1, F2, F3, and F4 (p>0.05), all of which contained superdisintegrants. Without superdisintegrants, F5, which contained a mixture of microcrystalline cellulose, mannitol, and lactose, was also able to achieve a short disintegration time and to meet the requirements of ODTs for dogs.


Sign in / Sign up

Export Citation Format

Share Document