scholarly journals University management: the lean production allied to the program quality of life at work

2019 ◽  
Vol 26 (4) ◽  
Author(s):  
Débora Veber Ribeiro ◽  
Taís Oliveira da Silva ◽  
Henrique Güths ◽  
Paulo Fossati ◽  
Rafael Pieretti Oliveira ◽  
...  
Keyword(s):  
Quality Of Life ◽  
Customer Service ◽  
Balanced Scorecard ◽  
Service Sector ◽  
Lean Production ◽  
Significant Loss ◽  
Value Stream Mapping ◽  
University Management ◽  
Value Stream

Abstract This article is a “cut-off” of a research that bears the title: Model of University Management: a look at governance from the Balanced Scorecard (BSC) of an Institution of Higher Education Community (CIHE) in southern Brazil. This is a qualitative case study based on Quality of Life at Work. The issue addressed here is: Under the guise of the principles of lean production, how is the quality of life and quality of life at work, of the staff of the student service sector of a CIHE? Our objective is, as of the mapping of the value stream, to identify how the quality of life and quality of life evaluations in the work of employees of the sector of student assistance of a CIHE. The instruments for data collection are: Value Stream Mapping (VSM); questionnaires and observation. The VSM results indicate a significant loss of time among operations. However, the results of the WHOQOL-bref questionnaire go from a very satisfactory and satisfactory quality of life. Finally, the results of the QWLQ-bref questionnaire demonstrate that quality of life at work is satisfactory. The study suggests improvements to optimize processes reduce losses and ensure satisfaction and quality in customer service.

scholarly journals Applied value stream mapping lean production system clipsal Vietnam Co

2015 ◽  
Vol 18 (1) ◽  
pp. 54-58
Author(s):  
Phong Nhu Nguyen ◽  
Thanh Van Vo ◽  
Van Thi-Thuy Ha
Keyword(s):  
Production System ◽  
Lean Production ◽  
Delivery Rate ◽  
Value Stream Mapping ◽  
Viet Nam ◽  
Nam Co ◽  
Value Stream ◽  
On Time Delivery

The paper applied Value Stream Mapping VSM for lean production system of Clipsal Viet Nam Co with reduces the time produc, improve productivity after reduces waste and increased on – time delivery rate.

scholarly journals Application of Lean Production With Value Stream Mapping to the Blasting and Coating Industry

2017 ◽  
Author(s):  
Wenchi Shou ◽  
Jun Wang ◽  
Peng Wu ◽  
Xiangyu Wang ◽  
Yongze Song
Keyword(s):  
Lean Production ◽  
Value Stream Mapping ◽  
Value Stream ◽  
Coating Industry

scholarly journals Manajemen jasa logistik pelayaran redpack guna mengurangi waste: studi kasus PT. PELNI

2020 ◽  
Vol 12 (3) ◽  
pp. 284
Author(s):  
Moses Laksono Singgih ◽  
Rizka Safira Hartanti
Keyword(s):  
Service Sector ◽  
Value Stream Mapping ◽  
Delivery Service ◽  
Value Stream ◽  
Sea Transportation ◽  
Value Flow ◽  
Relationship Of ◽  
A Company ◽  
Office Location

PT. PELNI is a company that provides shipping services using sea transportation. One of the services it has is REDPACK, which is a delivery service with priority to maintain package conditions. This service is still relatively new because it is operating in 2019 and evaluation is needed so that efficiency increases by reducing waste. In this study, the method used is Lean Service because the delivery service is in the service sector. The tools used in this research are Value Stream Mapping (VSM) and DEMATEL. VSM is used to analyze the value flow in the service process. VSM results can indicate a process that is not needed. After that, it is continued by identifying process flow waste and determining critical waste in these services. Determination of critical waste is done using DEMATEL. DEMATEL is a method used to analyze the cause-effect relationship of a complex system. The results showed that the main waste factor in logistics services is customer activity reporting incoming cargo. This waste can be repaired by moving the office location into one room with a new warehouse and activity flow.

A tRial Evaluating Mid Cut-Off Value Membrane Clearance of Albumin and Light Chains in HemoDialysis Patients: A Safety Device Study

2020 ◽  
Vol 49 (4) ◽  
pp. 468-478 ◽  
Author(s):  
Rathika Krishnasamy ◽  
Carmel M. Hawley ◽  
Meg J. Jardine ◽  
Matthew A. Roberts ◽  
Yeoungjee Cho ◽  
...  
Keyword(s):  
Quality Of Life ◽  
New Zealand ◽  
Serum Albumin ◽  
Hemodialysis Patients ◽  
Significant Loss ◽  
Light Chains ◽  
High Flux ◽  
Restless Legs ◽  
Clinical Trials Registry

Background: A new class of dialysis membrane, the mid cut-off (MCO) dialyzer, has been developed to improve the clearance of uremic toxins in hemodialysis (HD). The a tRial Evaluating Mid cut-Off Value membrane clearance of Albumin and Light chains in HemoDialysis patients (REMOVAL-HD) study aimed to determine if regular use of MCO dialyzer was safe and specifically did not result in a significant loss of albumin. Methods: This investigator initiated, crossover, longitudinal, device study was conducted across 9 centers in Australia and New Zealand (n = 89). Participants had a 4-week wash-in with high-flux HD, followed by 24-week intervention with MCO HD and a subsequent 4-week wash-out with high-flux HD. The primary outcome was change in serum albumin between weeks 4 and 28. Secondary outcomes included trends in serum albumin, changes in kappa- and lambda-free light chains (FLC), 6-min walk test (6MWT), malnutrition inflammation score (MIS), restless legs score and quality of life. Results: Participants had a mean age of 66 ± 14 years, 62% were men, 45% were anuric, and 51% had ­diabetes. There was no reduction in serum albumin following treatment with MCO HD (mean reduction –0.7 g/L, 95% CI –1.5 to 0.1). A sustained, unexplained reduction in serum albumin (>25%) was not observed in any participant. A reduction in FLC was observed 2 weeks into MCO HD (lambda-FLC: Δ –9.1 mg/L, 95% CI –14.4 to –3.7; kappa-FLC: Δ –5.7 mg/L, 95% CI –9.8 to –1.6) and was sustained for the rest of the study intervention. Both FLC increased after the cessation of MCO use. There was no improvement in restless legs symptoms, quality of life, 6MWT or MIS scores. Conclusions: Regular HD using the MCO dialyzer did not result in a significant fall in serum albumin. There were no effects on quality of life, functional status or nutrition. Trial Registration: Australian New Zealand Clinical Trials Registry Number (ANZCTRN) 12616000804482.

scholarly journals Product analysis using value stream mapping

2019 ◽  
Vol 2 (1) ◽  
pp. 467-475
Author(s):  
Krzysztof Michalski
Keyword(s):  
Good Condition ◽  
Mapping Method ◽  
Value Stream Mapping ◽  
Order Fulfillment ◽  
Product Analysis ◽  
Value Stream ◽  
Production Processes ◽  
Conveyor Belts

Abstract The sales market requires both the highest quality of offered goods and satisfactory prices for the buyer. In addition to the reliability of the important aspects are also the time of order fulfillment, reliability, readiness to act around the clock, and service of sold goods after their sale. In the production and confection of conveyor belts, the priority is a customer who, having strictly defined product requirements, also has individually focused goals. To meet these aspects, you need to look after the product both during its production and after. The products of this industry are specific, so that they can be used, after sales service is often required to be installed at the customer and possible actions to maintain their good condition during operation. The article analyzes selected production processes of transmission belts to identify disturbances. The analysis uses the value stream mapping method. Then, improvement methods were proposed.

Sign in / Sign up

Export Citation Format

Share Document