scholarly journals Effect of ridge lap surface treatment and thermocycling on microtensile bond strength of acrylic teeth to denture base resins

2009 ◽  
Vol 20 (2) ◽  
pp. 127-131 ◽  
Author(s):  
Carolina de Andrade Lima Chaves ◽  
Rômulo Rocha Regis ◽  
Ana Lucia Machado ◽  
Raphael Freitas de Souza
Keyword(s):  
Bond Strength ◽  
Surface Treatment ◽  
Testing Machine ◽  
Microtensile Bond Strength ◽  
Cross Sectional ◽  
Denture Base ◽  
Significant Difference ◽  
Base Resin ◽  
Artificial Teeth ◽  
Polymer Type

This study evaluated the effect of denture base polymer type (heat- and microwave-polymerized), ridge lap surface treatment (with and without methyl methacrylate-MMA etching) and thermocycling on the microtensile bond strength (µTBS) of Biotone acrylic teeth. Flat-ground, ridge-lap surface of posterior artificial teeth were bonded to cylinders of each denture base resin, resulting in the following groups (n=6): G1a - Clássico/with MMA etching; G1b - Clássico/without MMA etching; G2a - OndaCryl/with MMA etching; G2b - OndaCryl/without MMA etching. Rectangular bar specimens with a cross-sectional area of 1 mm² were prepared. Half of the bars in each group were thermocycled (5,000 cycles between 4ºC and 60ºC). µTBS testing was performed in an universal testing machine at a crosshead speed of 0.5 mm/min. Data were analyzed statistically by three-way ANOVA (α=0.05). There was no statisticaly significant difference (p>0.05) for the factors (resin, surface treatment,and thermocycling) or their interactions. The mean µTBS values (MPa) and standard deviations were as follows: Thermocycling - G1a: 41.00 (14.00); G1b: 31.00 (17.00); G2a: 50.00 (27.00); G2b: 40.00 (18.00); No thermocycling - G1a: 37.00 (14.00); G1b: 43.00 (25.00); G2a: 43.00 (14.00); G2b: 40.00 (27.00). The µTBS of Biotone artificial teeth to the denture base acrylic resins was not influenced by the polymer type, surface treatment or thermocycling.

Effect of Plasma Surface Treatment on Shear Bond Strength with Denture Base Resin in Co–Cr Alloy, Ti–6Al–4V Alloy, and CP–Ti Alloy

2020 ◽  
Vol 20 (9) ◽  
pp. 5771-5774
Author(s):  
Hyeon Kang ◽  
Min-Kyung Ji ◽  
Hoon-Sung Cho ◽  
Sang-Won Park ◽  
Kwi-Dug Yun ◽  
...  
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Testing Machine ◽  
Metal Alloy ◽  
Ti Alloy ◽  
Denture Base ◽  
Significant Difference ◽  
Base Resin ◽  
Cp Ti ◽  
Denture Base Resin

The purpose of this study was to examine the effect of plasma treatment by treating the surface of Co–Cr alloy, Ti–6Al–4V alloy, and CP–Ti alloy as a material for denture metal frameworks with non-thermal atmospheric pressure plasma (NTAPP) and measuring their shear bond strength (SBS) with a heat-cured resin. 20 specimens were prepared for each of Co–Cr, Ti–6Al–4V, and CP–Ti alloys. Each metal alloy group was divided into the following subgroups depending on NTAPP treatment: C (Co–Cr alloy without plasma), T (CP–Ti without plasma), A (Ti–6Al–4V alloy without plasma), CP (Co–Cr alloy with plasma), TP (CP–Ti with plasma) and AP (Ti–6Al–4V alloy with plasma). Specimens were treated with a metal conditioner and bonded to a denture base resin. SBS was measured using a universal testing machine. All data obtained were statistically analyzed using two-way analysis of variance (ANOVA), Tukey’s honestly significant difference (HSD) test, and independent t-test. The mean values (SD) of SBS (MPa) were: 10.31 (1.19) for C group; 12.43 (0.98) for T group; 13.75 (2.02) for A group; 13.53 (1.61) for CP group; 16.87 (1.55) for TP group; 17.46 (1.65) for AP group. The SBS of the AP group was the highest while that of the C group was the lowest. SBS of specimen treated with NTAPP was significantly increased regardless of metal alloy types (p < 0.001). Within the limitations of this study, NTAPP can increases the SBS of Co–Cr alloy, CP–Ti alloy, and Ti–6Al–4V alloy with a denture base resin.

scholarly journals Influence of aging on bond strength of artificial teeth to denture base acrylic resins

2018 ◽  
Vol 17 ◽  
pp. 1-9 ◽  
Author(s):  
Etiene Faria Aguiar ◽  
Rafaella Tonani ◽  
Fabiana de Goes Paiola ◽  
Michelle Alexandra Chinelatti ◽  
Carolina Noronha Ferraz de Arruda ◽  
...  
Keyword(s):  
Bond Strength ◽  
Acrylic Resin ◽  
Denture Base ◽  
Thermomechanical Cycling ◽  
Acrylic Resins ◽  
Significant Difference ◽  
Different Types ◽  
Base Resin ◽  
Artificial Teeth ◽  
Denture Base Resin

Aim: The aim of this study was to evaluate the bond strength of artificial teeth to different types of denture base resins when submitted to thermomechanical cycling (TMC). Methods: Sixty artificial mandibular first molars (Trilux, Vipi) were randomly divided into 3 groups according to denture base acrylic resins (Vipi Wave, Vipi Cril, and Vipi Cril Plus, Vipi). The teeth were fixed onto self-polymerizing acrylic resin bars (0.5 cm2 cross-section x 2 cm height), and the set was included in a metal flask using dental stone/silicone. After the dental stone was set, the bar was removed, and the denture base resin was packed and processed according to the group studied (Vipi Wave: 180 W/20 minutes + 540W/5 minutes; Vipi Cril and Vipi Cril Plus: Water bath at 74ºC for 9h). After polymerization, the samples were divided into 2 groups (n=10), according to the TMC treatment received (simulation of 5 years of mastication or not). The samples were submitted to tensile bond strength test (1 mm/min), and the data (MPa) were statistically analyzed (2-way ANOVA, Bonferroni, α=0.05). The fracture interfaces were evaluated using a stereomicroscope (50x). Results: The bond strength results showed no statistically significant difference (p>0.05) between the resins studied. TMC was significant (p<0.05), demonstrating lower values for the bond strength of artificial teeth to Vipi Cril Plus. The predominant fracture type was cohesive in resin. Conclusions: It was concluded that there is no difference in bond strength between artificial teeth and the resins used for denture base. However, TMC decreases the bond strength values of artificial teeth and crosslink thermo-polymerizable acrylic resin.

Microtensile Bond Strength of Contemporary Adhesives to Primary Enamel and Dentin

2007 ◽  
Vol 32 (2) ◽  
pp. 127-132 ◽  
Author(s):  
Marcela Marquezan ◽  
Bruno Lopes da Silveira ◽  
Luizb Henrique Burnett Jr ◽  
Célia Regina Martins Delgado Rodrigues ◽  
Paulo Floriani Kramer
Keyword(s):  
Bond Strength ◽  
Primary Teeth ◽  
Tooth Enamel ◽  
Testing Machine ◽  
Primary Tooth ◽  
Single Bond ◽  
Adhesive Systems ◽  
Microtensile Bond Strength ◽  
Cross Sectional ◽  
Significant Difference

The purpose of this study was to assess bond strength of three self-etching and two total-etch adhesive systems bonded to primary tooth enamel and dentin. Materials and methods: Forty extracted primary human molars were selected and abraded in order to create flat buccal enamel and occlusal dentin surfaces. Teeth were assigned to one of the adhesive systems: Adper Scotch Bond Multi Purpose, Adper Single Bond 2,Adper Prompt L-Pop, Clearfil SE Bond and AdheSE. Imediately to adhesive aplication, a composite resin(Filtek Z250) block was built up. After 3 months of water storage, each sample was sequentially sectioned in order to obtain sticks with a square cross-sectional area of about 0.72 mm2. The specimens were fixed lengthways to a microtensile device and tested using a universal testing machine with a 50-N load cell at a crosshead speed of 0.5 mm/min. Microtensile bond strength values were recorded in MPa and compared by Analysis of Variance and the post hoc Tukey test (a=0.05). Results: In enamel, Clearfil SE Bond presented the highest values, followed by Adper Single Bond 2, AdheSE and Adper Scotch Bond Multi Purpose, without significant difference. The highest values in dentin were obtained with Adper Scotch Bond Multi Purpose and all other adhesives did not present significant different values from that, except Adper Prompt L-Pop that achieved the lowest bond strength in both substrates. Adper Scotch Bond Multi Purpose and Adper Single Bond 2 presented significantly lower values in enamel than in dentin although all other adhesives presented similar results in both substrates. Conclusions: contemporary adhesive systems present similar behaviors when bonded to primary teeth, with the exception of the one-step self-etching system; and selfetching systems can achieve bond strength values as good in enamel as in dentin of primary teeth.

scholarly journals Effect of Trichloromethane on the Bond Strengths between Acrylic Teeth and Different Heat-cured Denture Bases: A Comparative Study

2012 ◽  
Vol 13 (6) ◽  
pp. 850-855
Author(s):  
N Venugopal Rao ◽  
D Lakshmayya Naidu ◽  
JSV Bharat ◽  
M Venugopal Reddy ◽  
P Naveen
Keyword(s):  
Bond Strength ◽  
Comparative Study ◽  
Testing Machine ◽  
Control Group ◽  
Denture Base ◽  
Significant Difference ◽  
Base Resin ◽  
Bond Strengths ◽  
Group 2 ◽  
Denture Base Resin

ABSTRACT Aim This study is to evaluate the role of 1:1 v/v 30% trichloromethane and monomer solvent in enhancing the durability of bonding between cross-linked acrylic teeth and different heatcured denture bases with or without mechanical preparations made on ridge lap portion of the artificial teeth. Materials and methods Two high impact denture base resin materials (Trevalon HI, DeTrey, UK, and DPI Tuff, Mumbai) and one nonhigh impact denture base resin material (DPI Quick Set, Mumbai) were selected to form three groups. Each group contains 30 specimens prepared by five different methods. A mixture of 30% trichloromethane and monomer, mixed in the ratio of 1:1 and applied for 1 minute on the ridge lap area of experimental specimens of methods—B, C, D and E (Specimens of method—A being control group, where no alterations were made at the ridge lap portion of acrylic teeth) before curing. Hounsfield universal testing machine is employed to evaluate the comparative bond strengths. Results No significant difference was seen in bond strengths between specimens of experimental methods in all groups. When each group was assessed separately method B specimens in group 1 (739.2 N), group 2 (758 N) and method D specimens in group 3 (729 N) showed highest mean bond strengths. Control group specimens showed the least bond strength (400-460 N) in all groups with more adhesive failures. Conclusion Ridge lap portion of the specimens treated with chemical solvent as in method B showed increased bond strength in groups 1 and 2. Hence, this is a preferred method. Clinical significance Evaluation of effect of different chemical and mechanical preparations at the ridge lap areas of acrylic teeth before acrylization helps the clinician and technician to overcome the problem of debonding of teeth from denture bases and in turn provides better quality prosthesis to the patient. How to cite this article Bharat JSV, Naidu DL, Reddy MV, Naveen P, Rao NV. Effect of Trichloromethane on the Bond Strengths between Acrylic Teeth and Different Heat-cured Denture Bases: A Comparative Study. J Contemp Dent Pract 2012;13(6):850-855.

scholarly journals Influence of Air Abrasion and Sonic Technique on Microtensile Bond Strength of One-Step Self-Etch Adhesive on Human Dentin

2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
Baraba Anja ◽  
Dukić Walter ◽  
Chieffi Nicoletta ◽  
Ferrari Marco ◽  
Sonja Pezelj Ribarić ◽  
...  
Keyword(s):  
Bond Strength ◽  
Testing Machine ◽  
Control Group ◽  
Air Abrasion ◽  
Microtensile Bond Strength ◽  
Dentin Surface ◽  
Significant Difference ◽  
Human Dentin ◽  
One Step ◽  
Self Etch

The purpose of thisin vitrostudy was to evaluate the microtensile bond strength of one-step self-etch adhesive to human dentin surface modified with air abrasion and sonic technique and to assess the morphological characteristics of the pretreated dentin surface. The occlusal enamel was removed to obtain a flat dentin surface for thirty-six human molar teeth. The teeth were randomly divided into three experimental groups (n= 12 per group), according to the pretreatment of the dentin: (1) control group, (2) air abrasion group, and (3) sonic preparation group. Microtensile bond strength test was performed on a universal testing machine. Two specimens from each experimental group were subjected to SEM examination. There was no statistically significant difference in bond strength between the three experimental groups (P> 0.05). Mean microtensile bond strength (MPa) values were 35.3 ± 12.8 for control group, 35.8 ± 13.5 for air abrasion group, and 37.7 ± 12.0 for sonic preparation group. The use of air abrasion and sonic preparation with one-step self-etch adhesive does not appear to enhance or impair microtensile bond strength in dentin.

Bond Strength of Artificial Teeth Attached to a Microwave-Polymerized Denture Base Resin after Immersion in Disinfectant Solutions

2015 ◽  
Vol 25 (7) ◽  
pp. 576-579 ◽  
Author(s):  
Ana Carolina Pero ◽  
Priscila Mattos Scavassin ◽  
Élen Massaro Nunes ◽  
Vivian Barnabé Policastro ◽  
Gabriela Giro ◽  
...  
Keyword(s):  
Bond Strength ◽  
Denture Base ◽  
Base Resin ◽  
Artificial Teeth ◽  
Denture Base Resin

Resistência de união ao cisalhamento entre a resina composta e dentes artificiais de resina acrílica

2021 ◽  
Vol 10 (40) ◽  
pp. 33-37
Author(s):  
Joyce de Figueiredo Meira Barbosa ◽  
Lara Pepita de Souza Oliveira ◽  
Marcelo Nascimento Bruce ◽  
Jonas Alves Oliveira ◽  
Ligia Regina Mota Vasconcelos ◽  
...  
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Composite Resin ◽  
Testing Machine ◽  
Acrylic Resin ◽  
Single Bond ◽  
Group Iii ◽  
Group I ◽  
Significant Difference ◽  
Artificial Teeth

Acrylic denture teeth may suffer fracture or wear requiring the need for repair. This study aimed to evaluate the shear bond strength between acrylic resin artificial teeth restored with composite resin (with two different surface treatments) and acrylic resin (AR), simulating repair with these materials. Thirty artificial incisors were included by the palatal side in a circular microwave-polymerized AR base and polished on their buccal side with 120 and 320 grit sandpaper in a metallographic polisher and, then, divided into three groups: (I) restoration with self-cured AR; (II) conventional restoration with Z-100 composite resin with application of acid etching and Single Bond-3M adhesive; and (III) restoration with Z-100 composite resin with submersion for 30 seconds in acetone and application of Single Bond-3M adhesive. Shear bond strength tests were performed in a Universal Testing Machine (Instron). The results were submitted to ANOVA and Tukey (p<0.05) tests, in which Group I (33.26MPa ±10.76) and Group III (22.24MPa ±13.13) showed no statistically significant difference, but both were superior to Group II (10.31MPa ±5.62), which showed a lower value of shear bond strength. It can be concluded that composite resin restoration with acetone pretreatment can be a viable alternative for repair.

scholarly journals Effect of Metalloproteinase Inhibitors on the Microtensile Bond Strength of Composite Resin to Er:YAG Laser-Irradiated Dentin

2016 ◽  
Vol 27 (4) ◽  
pp. 442-445 ◽  
Author(s):  
Beatriz Carlos Correa ◽  
Rodrigo Galo ◽  
Camila Scatena ◽  
Maria Cristina Borsatto ◽  
Aloísio Oro Spazzin ◽  
...  
Keyword(s):  
Bond Strength ◽  
Composite Resin ◽  
Er:Yag Laser ◽  
Testing Machine ◽  
Adhesive System ◽  
Fracture Pattern ◽  
Chemical Degradation ◽  
Control Group ◽  
Microtensile Bond Strength ◽  
Cross Sectional

Abstract This study evaluated the effect of matrix metalloproteinase (MMP) inhibitors - 2% (CHX) and sodium fluoride (NaF) (5000 ppm) - on microtensile bond strength (μTBS) of composite resin to Er:YAG laser-irradiated dentin after chemical degradation of the bond interface. The occlusal surface of forty sound human molars was removed exposing the dentin surface (n=10), which was polished, irradiated with Er:YAG laser, acid etched and dried. Twenty specimens were rewetted with 2% CHX (control group) and 20 were rewetted with NaF (5000 ppm). The adhesive system was applied and a 4-mm-high plateau of light-cured composite resin was built up. Resin-dentin sticks were obtained with a rectangular cross-sectional area (0.8-1 mm2) and were either stored in water at 37 ?#61616;C for 24 h or submitted to chemical degradation. For chemical degradation, they were immersed in 10% NaOCl aqueous solution for 5 h and rinsed in water for 1 h. The sticks were submitted to microtensile test in a mechanical testing machine at 0.5 mm/min until failure. Fracture pattern was analyzed using SEM. μTBS values were calculated in MPa and submitted to analysis of variance ANOVA (α=0.05). The variance analysis showed that the 'MMP inhibitor' and 'degradation' factors (p=0.214 and p=0.093, respectively) and interaction between the factors were not statistically significant (p=0.143). Mixed failure predominated in all groups. In conclusion, the 2% CHX and NaF 5000 ppm presented similar μTBS of composite resin to laser-irradiated dentin before and after chemical degradation

Sign in / Sign up

Export Citation Format

Share Document