scholarly journals Influence of Air Abrasion and Sonic Technique on Microtensile Bond Strength of One-Step Self-Etch Adhesive on Human Dentin

2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
Baraba Anja ◽  
Dukić Walter ◽  
Chieffi Nicoletta ◽  
Ferrari Marco ◽  
Sonja Pezelj Ribarić ◽  
...  
Keyword(s):  
Bond Strength ◽  
Testing Machine ◽  
Control Group ◽  
Air Abrasion ◽  
Microtensile Bond Strength ◽  
Dentin Surface ◽  
Significant Difference ◽  
Human Dentin ◽  
One Step ◽  
Self Etch

The purpose of thisin vitrostudy was to evaluate the microtensile bond strength of one-step self-etch adhesive to human dentin surface modified with air abrasion and sonic technique and to assess the morphological characteristics of the pretreated dentin surface. The occlusal enamel was removed to obtain a flat dentin surface for thirty-six human molar teeth. The teeth were randomly divided into three experimental groups (n= 12 per group), according to the pretreatment of the dentin: (1) control group, (2) air abrasion group, and (3) sonic preparation group. Microtensile bond strength test was performed on a universal testing machine. Two specimens from each experimental group were subjected to SEM examination. There was no statistically significant difference in bond strength between the three experimental groups (P> 0.05). Mean microtensile bond strength (MPa) values were 35.3 ± 12.8 for control group, 35.8 ± 13.5 for air abrasion group, and 37.7 ± 12.0 for sonic preparation group. The use of air abrasion and sonic preparation with one-step self-etch adhesive does not appear to enhance or impair microtensile bond strength in dentin.

scholarly journals Effect of chitosan nanoparticles on microtensile bond strength of resin composite to dentin: an in vitro study

2020 ◽  
Vol 23 (2) ◽  
Author(s):  
Amr Mohsen Mohamed ◽  
Sameh Mahoud Nabih ◽  
Mohamed Ahmed Wakwak
Keyword(s):  
Bond Strength ◽  
Resin Composite ◽  
Testing Machine ◽  
Chitosan Nanoparticles ◽  
Tooth Surface ◽  
Control Group ◽  
Microtensile Bond Strength ◽  
Significant Difference ◽  
Self Etch

Objective: The purpose of this study was to evaluate the effect of chitosan nanoparticles on microtensile bond strength of resin composite to dentin using self etch adhesive after aging. Material and Methods: A total number of 90 freshly extracted, sound human molar teeth. Flat tooth surface was gained after cut of the occlusal surface. Three main groups according to pretreatment of dentin before adhesive application; 0.2 % chitosan, 2.5 % chitosan and no treatment control group. Universal self etch adhesive were applied according to manufacture instruction and 4 mm of Feltik Z250 xt composite. Storage of specimens for 1 day, 3 months and 6 months in 37O C distilled water. After that, the tooth was sectioned to beams of 1 mm x8 mm sticks for microtensile bond strength test using universal testing machine. Scanning electron microscope (SEM) was used to evalute the effect of chitosan nanoparticles on dentin and smear layer. Kruskal-Wallis test was used to compare between the three groups as well as the three aging periods. Dunn’s test was used for pair-wise comparisons. The significance level was set at P ≤ 0.05. Results: chitosan 0.2% is statistically significant increase in bond strength than chitosan 2.5% and control in one day group. Three months chitosan 0.2 % groups have statistically significant increase in bond strength than chitosan 2.5%. It was found in 6 months that control and chitosan 0.2 % have statistically significant increase in bond strength than chitosan 2.5%. There was statistically significant difference found between the three studied groups regarding bond strength at different storage times . Conclusion: Microtensile bond strength was influenced by different chitosan concentration. Different aging periods had no effect on the microtensile bond strength without application of chitosan and with application of 2.5% chitosan concentration.KEYWORDSChitosan nanoparticles; Microtensile bond strength; MMPs.

scholarly journals Evaluation of bond strength of one step and two steps self-etch adhesive agents with two different pulp-capping materials

2020 ◽  
Vol 67 (2) ◽  
pp. 75-82
Author(s):  
Vasilka Rendzova ◽  
Sonja Apostolska ◽  
Emilija Kostadinovska ◽  
Maja Antanasova ◽  
Marina Eftimoska ◽  
...  
Keyword(s):  
Bond Strength ◽  
Calcium Silicate ◽  
Testing Machine ◽  
Pulp Capping ◽  
Dentin Adhesives ◽  
Significant Difference ◽  
One Step ◽  
Calcium Silicate Cements ◽  
Set Up ◽  
Self Etch

Primary purpose of restorative dentistry is to preserve pulp vitality. Besides calcium hydroxide, the application of calcium silicate cements as a material for direct pulp capping has become used recently. The aim of our study was to investigate the influence of materials for direct and indirect pulp capping on the bond strength of composite restorations using two different self etch dentin adhesives. The test was performed on 60 intact molars extracted for periodontal or orthodontic reasons. The prepared samples were divided into the two groups and three subgroups depending on the adhesive and pulp cupping material. Two different calcium silicate based materials were used for pulp cupping. One step and two steps self etch dentin adhesive was applied to prepared specimens depending on the group and with the help of a specially made metal mold set up a composite post. The share bond strength was assessed using a universal testing machine. The results showed significant difference in the share bond strength between the samples treated with TheraCal LC and Biodentine with TheraCal LC being superior to Biodentine.

The Effect of Etching Time to Durability of Dentin Adhesives

2007 ◽  
Vol 361-363 ◽  
pp. 869-872
Author(s):  
J.R. Kim ◽  
M.R. Jung ◽  
Sang Jin Park ◽  
K.K. Choi
Keyword(s):  
Bond Strength ◽  
Etching Time ◽  
Control Group ◽  
Single Bond ◽  
Microtensile Bond Strength ◽  
Dentin Adhesives ◽  
Significant Difference ◽  
One Step ◽  
Bonding Systems ◽  
Total Etching

The purpose of this study was to evaluate the effect of different etching times on microtensile bond strength(μTBS) to dentin both initial and after thermocycling with 3 different types of total-etching adhesives. Fifty four teeth were divided into 18 groups according to 3 etching times(5, 15, 25sec), 3 types of adhesives(Scotchbond Multipurpose(SM), Single Bond(SB), One-Step(OS)), and thermocycling(0, 2,000cycles). Following the bonding procedure, the specimens were bonded using Z250 composite. Half of them were not thermocycled (control group) and the others were subjected to 2,000 thermocycle (experimental group) and processed for microtensile bond strength testing. The microtensile bond strength(MPa) by different etching time(5, 15, 25s) was 37.7±9.1, 34.3±10.9 and 30.5±7.5 using Scotchbond Multipurpose(SM), 34.6±10.1, 33.8±7.6, 35.3±9.9 using single bond(SB) and 34.3±7.6, 31.3±8.5, 35.8±11.0 using one step(OS). After 2000 thermocycling the specimens, the microtensile bond strength(MPa) was decreased for all dentin bonding systems tested. But when specimens were bonded with OS, there is no significant difference between microtensile bond strength of the groups with the different etching times(5, 15, 25s) (28.2±7.8a , 29.1±8.6a and 28.2±9.4a). And the microtensile bond strength of the groups using SM, SB was decreased significantly when the etchant was applied for 25 sec(p<0.05). After all, the adhesive durability for dentin could be affected by type of solvents in adhesive and etching time. Especially, extended etching time may deteriorate dentin bond strength when ethanol-based adhesive was used

Effect of Different Pretreatment Methods on Dentin Bond Strength of a One-step Self-etch Adhesive

2009 ◽  
Vol 10 (1) ◽  
pp. 41-48 ◽  
Author(s):  
Emel Karaman ◽  
A. Rüya Yazici ◽  
Atila Ertan ◽  
Güi Özgünaltay ◽  
Berrin Dayangaç
Keyword(s):  
Bond Strength ◽  
Acid Group ◽  
Control Group ◽  
Air Abrasion ◽  
Group Iii ◽  
Group I ◽  
One Step ◽  
Laser Group ◽  
Group Ii ◽  
Self Etch

Abstract Aim The aim of this in vitro study was to evaluate the shear bond strength of a one-step self-etch adhesive to dentin pretreated with phosphoric acid, air abrasion, or laser. Methods and Materials Fifty-six extracted non-carious human mandibular molars were mounted and the occlusal surfaces ground with a mechanical grinder to obtain flat occlusal dentin surfaces. The teeth were randomly divided into four groups of 14 teeth according to the different dentin surface pretreatment methods: Group I- Acid, Group II- Laser, Group III- Air abrasion, Group IV (Control)- No surface treatment. After applying a one-step self-etch adhesive system, Futura Bond NR, cylinders of Z250 composite resin were bonded to the dentin surfaces by transparent gelatin capsules (2.5 mm diameter; 3 mm high) and then polymerized. All specimens were stored in distilled water at 37°C for 24 hours. Shear bond testing was carried out using an Universal testing machine with a crosshead speed of 0.5 mm/sec. Data were analyzed using the Kruskal Wallis and Mann-Whitney tests at a significance level of 0.05. Results The bond strength of air abrasion (Group III) and the control group (Group IV) were statistically higher than both the acid (Group I) and laser (Group II) pretreatments (p<0.05). No statistically significant differences were found in shear bond strength between surfaces treated with air abrasion and the control group (p>0.05). Surfaces pretreated with laser (Group II) resulted in the lowest bond strength which was not statistically different from those pretreated with acid (Group I) (p>0.05). Conclusion Surfaces pretreated with acid and laser adversely affected the bond strength of a one-step selfetch adhesive, Futura Bond NR, while pretreatment with air abrasion had no effect on bond strength. Clinical Significance The pretreatment of dentin surfaces prior to self-etch adhesive seems to be unnecessary and defeats the original purpose of these systems. Citation Yazici AR, Karaman E, Ertan A, Özgünaltay G, Dayangaç B. Effect of Different Pretreatment Methods on Dentin Bond Strength of a One-step Self-etch Adhesive. J Contemp Dent Pract 2009 January; (10)1:041-048.

scholarly journals Evaluation of Microtensile Bond Strength of Universal Self-etch Adhesive System to Wet and Dry Dentin

2020 ◽  
Vol 8 (D) ◽  
pp. 77-81
Author(s):  
Mohamed Ahmed Wakwak ◽  
Eslam Hassan Gabr ◽  
Ahmed Mohamed Elmarakby
Keyword(s):  
Bond Strength ◽  
Adhesive System ◽  
Solvent Free ◽  
Microtensile Bond Strength ◽  
Universal Adhesive ◽  
Significance Level ◽  
Significant Difference ◽  
One Step ◽  
Storage Times ◽  
Self Etch

BACKGROUND: The durability of dentin-resin interfaces with the universal adhesive system is a crucial characteristic with chemical interactions between the exposed collagen and the adhesive monomers, but it is still compromised with wet and dry mode. AIM: The present study evaluated the effect of dentin wetness and solvents containing of one-step self-etch adhesives on the microtensile bond strength (μTBS) of dentin at different storage times. METHODS: Occlusal dentin of 54 extracted human molars was exposed. Each adhesive agent was applied according to manufacturer instructions to wet and dry dentin surfaces. Composite resin was incrementally built up. Bond strengths to dentin were determined using the μTBS test after water storage for 24 h, 1 month, and 6 months. One-way ANOVA was used to compare between more than two non-related samples. The significance level was set at p ≤ 0.05. RESULTS: Dryness of dentin increases the μTBS with solvent-containing adhesives while decrease the μTBS with solvent-free adhesive. There was an increase in microtensile bond strength values in the case of ethanol water-based self-etch adhesive over time. No statistically significant difference was found among different storage times regarding μTBS for solvent-free adhesive, while a statistically significant difference was found among different storage times in μTBS for solvent-containing adhesives. CONCLUSION: Universal adhesive systems improve the durability and stability of dentin bond strength.

scholarly journals The Effect of Different Disinfecting Agents on Bond Strength of Resin Composites

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Ahmed Mohammed Hassan ◽  
Ahmed Ali Goda ◽  
Kusai Baroudi
Keyword(s):  
Bond Strength ◽  
Sodium Hypochlorite ◽  
Shear Bond Strength ◽  
Resin Composite ◽  
Testing Machine ◽  
Control Group ◽  
Posterior Teeth ◽  
Surface Pretreatment ◽  
Dentin Surface ◽  
Post Hoc

Objective. The aim of this study was to evaluate the effect of different disinfectant agents on bond strength of two types of resin composite materials.Methods. A total of 80 sound posterior teeth were used. They were divided into four groups(n=20)according to the dentin surface pretreatment (no treatment, chlorhexidine gluconate 2%, sodium hypochlorite 4%, and EDTA 19%). Each group was divided into two subgroups according to the type of adhesive (prime and bond 2.1 and Adper easy one). Each subgroup was further divided into two subgroups according to the type of resin composite (TPH spectrum and Tetric EvoCeram). Shear bond strength between dentin and resin composite was measured using Universal Testing Machine. Data collected were statistically analyzed byt-test and one-way ANOVA followed by Tukey’spost hoctest.Results. It was found that dentin treated with EDTA recorded the highest shear bond strength values followed by sodium hypochlorite and then chlorhexidine groups while the control group showed the lowest shear bond strength.Conclusions. The surface treatment of dentin before bonding application has a great effect on shear bond strength between resin composite and dentin surface.

scholarly journals Effect of Using Nano and Micro Airborne Abrasive Particles on Bond Strength of Implant Abutment to Prosthesis

2015 ◽  
Vol 26 (1) ◽  
pp. 50-55 ◽  
Author(s):  
Mansour Rismanchian ◽  
Amin Davoudi ◽  
Elham Shadmehr
Keyword(s):  
Bond Strength ◽  
Testing Machine ◽  
Control Group ◽  
Abrasive Particles ◽  
Significant Difference ◽  
Implant Abutments ◽  
Implant Abutment ◽  
Roughened Surface ◽  
Bond Strengths ◽  
Spss Software

Connecting prostheses to the implant abutments has become a concern and achieving a satisfactory retention has been focused in cement-retention prostheses recently. Sandblasting is a method to make a roughened surface for providing more retention. The aim of this study was to compare effects of nano and micro airborne abrasive particles (ABAP) in roughening surface of implant abutments and further retention of cemented copings. Thirty Xive abutments and analogues (4.5 D GH1) were mounted vertically in self-cured acrylic blocks. Full metal Ni-Cr copings with a loop on the top were fabricated with appropriate marginal adaptation for each abutment. All samples were divided into 3 groups: first group (MPS) was sandblasted with 50 µm Al2O3 micro ABAP, second group (NSP) was sandblasted with 80 nm Al2O3 nano ABAP, and the third group (C) was assumed as control. The samples were cemented with provisional cement (Temp Bond) and tensile bond strength of cemented copings was evaluated by a universal testing machine after thermic cycling. The t test for independent samples was used for statistical analysis by SPSS software (version 15) at the significant level of 0.05. Final result showed significant difference among all groups (p<0.001) and MPS manifested the highest mean retention (207.88±45.61 N) with significant difference among other groups (p<0.001). The control group showed the lowest bond strength as predicted (48.95±10.44 N). Using nano or micro ABAP is an efficient way for increasing bond strengths significantly, but it seems that micro ABAP was more effective.

scholarly journals The Impact of Chlorhexidine Mouth Rinse on the Bond Strength of Polycarbonate Orthodontic Brackets

2014 ◽  
Vol 15 (6) ◽  
pp. 688-692 ◽  
Author(s):  
Sukumaran Anil ◽  
Farouk Ahmed Hussein ◽  
Mohammed Ibrahim Hashem ◽  
Elna P Chalisserry
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Testing Machine ◽  
Test Group ◽  
Orthodontic Brackets ◽  
Control Group ◽  
Mouth Rinse ◽  
Significant Difference ◽  
Bond Strengths ◽  
The Impact

ABSTRACT Objective The purpose of the current in-vivo study was to assess the effect of using 0.12% chlorhexidine (CHX) mouth rinse, before bonding, on shear bond strength of polycarbonate brackets bonded with composite adhesive. Subjects and methods Eighteen orthodontic patients with a mean age 21.41 ± 1.2 years, who were scheduled to have 2 or more first premolars extracted, were included in this study. Patients were referred for an oral prophylaxis program which included, in part, the use of a mouth rinse. Patients were divided into 2 groups, a test group of 9 patients who used 0.12% CHX gluconate mouth rinse twice daily and a control group of 9 patients who used a mouth rinse without CHX, but with same color. After 1 week, polycarbonate brackets were bonded to first premolars with Transbond XT composite adhesive. Premolars were extracted after 28 days and tested for shear bond strength on a universal testing machine. Student's t-test was used to compare shear bond strengths of both groups. Results No statistically significant difference was found in bond strengths’ values between both groups. The test group (with CHX) has mean shear bond strength of 14.21 ± 2.42 MPa whereas the control group (without CHX) revealed a mean strength of 14.52 ± 2.31 MPa. Conclusion The use of 0.12% CHX mouth rinse, for one week before bonding, did not affect the shear bond strength of polycarbonate brackets bonded with Transbond composite. Furthermore, these brackets showed clinically acceptable bond strength. How to cite this article Hussein FA, Hashem MI, Chalisserry EP, Anil S. The Impact of Chlorhexidine Mouth Rinse on the Bond Strength of Polycarbonate Orthodontic Brackets. J Contemp Dent Pract 2014;15(6):688-692.

scholarly journals Effect of Surface Treatments on the Bond Strength to Turkom-Cera All-ceramic Material

2016 ◽  
Vol 17 (11) ◽  
pp. 920-925 ◽  
Author(s):  
Bandar MA Al-Makramani ◽  
Fuad A Al-Sanabani ◽  
Abdul AA Razak ◽  
Mohamed I Abu-Hassan ◽  
Ibrahim Z AL-Shami ◽  
...  
Keyword(s):  
Bond Strength ◽  
Ceramic Material ◽  
Failure Modes ◽  
Testing Machine ◽  
Surface Treatments ◽  
Resin Cement ◽  
Control Group ◽  
Significant Difference ◽  
All Ceramic ◽  
Effect Of Surface

ABSTRACT Aim The aim of this study was to evaluate the effect of surface treatments on shear bond strength (SBS) of Turkom-Cera (Turkom-Ceramic (M) Sdn. Bhd., Puchong, Malaysia) all-ceramic material cemented with resin cement Panavia-F (Kuraray Medical Inc., Okayama, Japan). Materials and methods Forty Turkom-Cera ceramic disks (10 mm × 3 mm) were prepared and randomly divided into four groups. The disks were wet ground to 1000-grit and subjected to four surface treatments: (1) No treatment (Control), (2) sandblasting, (3) silane application, and (4) sandblasting + silane. The four groups of 10 specimens each were bonded with Panavia-F resin cement according to manufacturer's recommendations. The SBS was determined using the universal testing machine (Instron) at 0.5 mm/min crosshead speed. Failure modes were recorded and a qualitative micromorphologic examination of different surface treatments was performed. The data were analyzed using the one-way analysis of variance (ANOVA) and Tukey honestly significant difference (HSD) tests. Results The SBS of the control, sandblasting, silane, and sandblasting + silane groups were: 10.8 ± 1.5, 16.4 ± 3.4, 16.2 ± 2.5, and 19.1 ± 2.4 MPa respectively. According to the Tukey HSD test, only the mean SBS of the control group was significantly different from the other three groups. There was no significant difference between sandblasting, silane, and sandblasting + silane groups. Conclusion In this study, the three surface treatments used improved the bond strength of resin cement to Turkom-Cera disks. Clinical significance The surface treatments used in this study appeared to be suitable methods for the cementation of glass infiltrated all-ceramic restorations. How to cite this article Razak AAA, Abu-Hassan MI, AL-Makramani BMA, AL-Sanabani FA, AL-Shami IZ, Almansour HM. Effect of Surface Treatments on the Bond Strength to Turkom-Cera All-Ceramic Material. J Contemp Dent Pract 2016;17(11):920-925.

scholarly journals Influence of curing mode of resin luting cements on bond strength to dentin

2017 ◽  
Vol 15 (4) ◽  
pp. 258
Author(s):  
Marcelo Giannini ◽  
Andreia Assis Carvalho ◽  
Ariovaldo Stefani ◽  
Wladimir Franco de Sá Barbosa ◽  
Lawrence Gonzaga Lopes
Keyword(s):  
Bond Strength ◽  
Testing Machine ◽  
Resin Cement ◽  
Control Group ◽  
Resin Cements ◽  
Luting Cements ◽  
Halogen Light ◽  
Significant Difference ◽  
Tooth Surfaces ◽  
Light Curing

Self-adhesive, dual-polymerizing resin cements require no treatment to the prepared tooth surfaces before cementation. Aim: The aim of this study was to evaluate the influence of curing mode on bond strength (BS) of three cementing systems to bovine dentin. Methods: The buccal enamel surfaces of 50 bovine incisors were removed to expose dentin and to flat the surface. The teeth were divided into five groups (n=10), which consisted of two resin cements (Multilink and Clearfil SA Cement) that were tested in dual- (halogen light for 40 s) and self-cured modes, and a control (RelyX ARC). Two cylinders of resin cements (1.0 mm X 0.75 mm) were prepared on each bonded dentin surface. After 24h at 37oC, resin cylinders were subjected to micro-shear testing in a universal testing machine (4411/Instron - 0.5 mm/min). Data were statistically analyzed by two-way ANOVA, Tukey and Dunnett`s test (5%). Results: Multilink showed higher BS than those observed on Clearfil SA. Light-curing resulted in higher BS for both Multilink and Clearfil SA. When Multilink was light-cured, no significant difference on BS was demonstrated between it and RelyX ARC. Conclusions: The highest BS values were obtained in control group and light-cured Multilink resin cement.

Sign in / Sign up

Export Citation Format

Share Document