scholarly journals Comparison of different ultrasonic vibration modes for post removal

2012 ◽  
Vol 23 (1) ◽  
pp. 49-53 ◽  
Author(s):  
Neilor Mateus Antunes Braga ◽  
Juliana Monteiro da Silva ◽  
Jacy Ribeiro de Carvalho-Júnior ◽  
Raquel Conceição Ferreira ◽  
Paulo César Saquy ◽  
...  
Keyword(s):  
Ultrasonic Vibration ◽  
Root Canal ◽  
Testing Machine ◽  
In Vitro Study ◽  
Cervical Region ◽  
Vibration Modes ◽  
Mean Values ◽  
Core Surface ◽  
Ultrasonic Device

This in vitro study compared different ultrasonic vibration modes for intraradicular cast post removal. The crowns of 24 maxillary canines were removed, the roots were embedded in acrylic resin blocks, and the canals were treated endodontically. The post holes were prepared and root canal impressions were taken with self-cured resin acrylic. After casting, the posts were cemented with zinc phosphate cement. The samples were randomly distributed into 3 groups (n=8): G1: no ultrasonic vibration (control); G2: tip of the ultrasonic device positioned perpendicularly to core surface and close to the incisal edge; and G3: tip of the ultrasonic device positioned perpendicularly to core surface at cervical region, close to the line of cementation. An Enac OE-5 ultrasound unit with an ST-09 tip was used. All samples were submitted to the tensile test using an universal testing machine at a crosshead speed of 1 mm/min. Data were subjected to one-way ANOVA and Tukey's post-hoc tests (α=0.05). Mean values of the load to dislodge the posts (MPa) were: G1 = 4.6 (± 1.4) A; G2 = 2.8 (± 0.9) B, and G3= 0.9 (± 0.3) C. Therefore, the ultrasonic vibration applied with the tip of device close to the core's cervical area showed higher ability to reduce the retention of cast post to root canal.

scholarly journals Influence of Exposing Root Canal Dentin to Calcium Hydroxide on Its Flexural Strength

2015 ◽  
Vol 1 (3) ◽  
pp. 143
Author(s):  
Diatri Nari Ratih
Keyword(s):  
Flexural Strength ◽  
Calcium Hydroxide ◽  
Root Canal ◽  
Artificial Saliva ◽  
Testing Machine ◽  
In Vitro Study ◽  
Control Group ◽  
Sterile Saline ◽  
Root Canal Dentin

Calcium hydroxide has been used extensively in endodontic treatments, for instance as an intra-canal dressing; however, the exposure of root canal dentin to calcium hydroxide may affect its flexural strength and could have important clinical implications for endodontic treatment. The purpose of this in vitro study was to investigate the influence of calcium hydroxide on the flexural strength of root canal dentin.Seventy-two extracted single-rooted human mandibular premolars were used in this study. Each tooth was instrumented using crown-down technique and was irrigated using sterile saline. The teeth were assigned into three groups of 24 each. The prepared root canal system of each tooth was filled with calcium hydroxide mixed with sterile saline (group 1), a calcium hydroxide commercially available product (UltraCal®) (group 2) or saline solution (group 3, as control). The apices and access opening were sealed using composite resin, and the teeth were immersed in artificial saliva. After 7, 14 and 30 days of immersion, the inner root canal dentin of 8 teeth respectively from each group were sectioned to create dentin bars (1 X 1 mm, with 7 mm in length). Each dentin bar then was subjected to a three-point bending flexural test using MTS (Universal Testing Machine). Data gathered were then analyzed using two-way ANOVA, followed by Tukey’s test with the level of significance of 95%. The results showed that exposure to calcium hydroxide either using calcium hydroxide mixed with sterile saline or UltraCal® for 14 and 30 days can reduce flexural strength of root canal dentin compared to control group (p<0.05). In contrast, after 7 days exposure, there was no significantly different of flexural strength between three groups (p>0.05).   It can be concluded that calcium hydroxide reduced the flexural strength of root canal dentin. The longer the exposure to calcium hydroxide would produce a greater effect on flexural strength of root canal dentin.   

Suction force rather than aspiration flow correlates with recanalization in hard clots: an in vitro study model

2021 ◽  
pp. neurintsurg-2020-017242
Author(s):  
David Fernandez-Sanchez ◽  
Daniel Garcia-Sabido ◽  
Tudor G Jovin ◽  
Helena Villanova ◽  
Tommy Andersson ◽  
...  
Keyword(s):  
Testing Machine ◽  
Physical Property ◽  
In Vitro Study ◽  
Suction Force ◽  
Mean Values ◽  
Distal Surface ◽  
Stent Retrievers ◽  
Rate Sensor

BackgroundANA Advanced Neurovascular Access provides a novel funnel component designed to reduce clot fragmentation and facilitate retrieval in combination with stent-retrievers (SRs) in stroke patients by restricting flow and limiting clot shaving. In previous publications ANA presented excellent in vitro/in vivo efficacy data, especially with fibrin-rich hard clots. We aimed to determine the main physical property responsible for these results, namely suction force versus aspiration flow.MethodsWe evaluated in a bench model the suction force and flow generated by ANA and compared them to other neurovascular catheters combined with a SR (Solitaire). Aspiration flow was evaluated with a flow rate sensor while applying vacuum pressure with a pump. Suction force was determined using a tensile strength testing machine and a purposely designed tool that completely seals the device tip simulating complete occlusion by a hard clot. Suction force was defined as the force needed to separate the device from the clot under aspiration. All experiments were repeated five times, and mean values used for comparisons.ResultsAspiration flow increased with the inner diameter of the device: ANA 1.85±0.04 mL/s, ACE68 3.74±0.05 mL/s, and 8F-Flowgate2 5.96±0.30 mL/s (P<0.001). After introducing the SR, the flow was reduced by an average of 0.57±0.12 mL/s. Due to its larger distal surface, ANA suction force (1.69±0.40 N) was significantly higher than ACE68 (0.26±0.04 N) and 8F-Flowgate2 (0.42±0.06 N) (P<0.001). After introducing the SR, suction force variation was not relevant except for ANA that increased to 2.64±0.41 N.ConclusionDespite lower in vitro aspiration flow, the ANA design showed a substantially higher suction force than other thrombectomy devices.

scholarly journals Incorporation of Arginine to Commercial Orthodontic Light-Cured Resin Cements—Physical, Adhesive, and Antibacterial Properties

Materials ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4391
Author(s):  
Saulo Geraldeli ◽  
Lucas de Almeida Maia Carvalho ◽  
Isaac Jordão de Souza Araújo ◽  
Maurício Bottene Guarda ◽  
Marcelle M. Nascimento ◽  
...  
Keyword(s):  
Shear Bond Strength ◽  
Testing Machine ◽  
Antibacterial Properties ◽  
In Vitro Study ◽  
Resin Cement ◽  
Preventive Strategy ◽  
Resin Cements ◽  
Mean Values ◽  
Significant Difference

(1) Background: The amino acid arginine is now receiving great attention due to its potential anti-caries benefits. The purpose of this in vitro study was to evaluate the shear bond strength (SBS), ultimate tensile strength (UTS), and antimicrobial potential (CFU) of two arginine-containing orthodontic resin cements. (2) Methods: Forty bovine incisors were separated into four groups (n = 10): Orthocem, Orthocem + arginine (2.5 wt%), Transbond XT, and Transbond XT + arginine (2.5 wt%). The brackets were fixed to the flat surface of the enamel, and after 24 h the SBS was evaluated using the universal testing machine (Instron). For the UTS test, hourglass samples (n = 10) were made and tested in a mini-testing machine (OM-100, Odeme). For the antibacterial test (colony forming unit-CFU), six cement discs from each group were made and exposed to Streptococcus mutans UA159 biofilm for 7 days. The microbiological experiment was performed by serial and triplicate dilutions. The data from each test were statistically analyzed using a two-way ANOVA, followed by Tukey’s test (α = 0.05). (3) Results: The enamel SBS mean values of Transbond XT were statistically higher than those of Orthocem, both with and without arginine (p = 0.02033). There was no significant difference in the SBS mean values between the orthodontic resin cements, either with or without arginine (p = 0.29869). The UTS of the Transbond XT was statistically higher than the Orthocem, but the addition of arginine at 2.5 wt% did not influence the UTS for either resin cement. The Orthocem + arginine orthodontic resin cement was able to significantly reduce S. mutans growth, but no difference was observed for the Transbond XT (p = 0.03439). (4) Conclusion: The incorporation of arginine to commercial orthodontic resin cements may be an efficient preventive strategy to reduce bacterial growth without compromising their adhesive and mechanical properties.

scholarly journals Reinforcement effect of intra-orifice barrier materials in teeth treated with regenerative endodontic procedure: Research article

2021 ◽  
Vol 15 (2) ◽  
pp. 111-114
Author(s):  
Sevinç Aktemur Türker ◽  
Keziban Olcay ◽  
Sena Kaşıkçı ◽  
Fatma Zühal Yurdagül
Keyword(s):  
Fracture Resistance ◽  
Testing Machine ◽  
Glass Ionomer Cement ◽  
In Vitro Study ◽  
Cervical Region ◽  
Control Group ◽  
Barrier Materials ◽  
Immature Teeth ◽  
Significant Difference

Background. Regenerative endodontic treatment (RET) is a clinically advanced procedure for necrotic immature teeth. However, root canal walls of these teeth are brittle especially in the cervical region and need reinforcement. This in vitro study is conducted to evaluate the effect of intra-orifice barrier materials on the fracture resistance of immature teeth treated with regenerative procedure. Methods. Forty-eight maxillary central incisors were used. Twelve intact teeth were selected for the control group. Remained teeth were prepared using peeso drills to simulate immature teeth and assigned into three groups according to the intra-orifice barrier material placed over MTA (n=12); Composite resin (CR), ProRoot MTA and Resin-modified glass ionomer cement (RMGIC). Fracture strength test was applied using a universal testing machine. One-way ANOVA and Tukey post hoc tests were used at P=0.05. Results. A significant difference was obtained among groups (P<0.05). MTA showed the lowest fracture resistance (P<0.05). However, no significant difference was found among RMGIC, CR, and control groups (P>0.05). Conclusion. Intra-orifice restorative materials have reinforcement affect in immature teeth treated with regenerative endodontic procedure. RMGIC or CR can be regarded as a viable choice to reduce the occurrence of cervical root fracture of immature teeth treated with a regenerative therapy.

scholarly journals Comparison of Mechanical Resistance to Maximal Torsion Stress in Original and Nonoriginal or Compatible Prosthetic Implant Screws: An In Vitro Study

2021 ◽  
Vol 2021 ◽  
pp. 1-7
Author(s):  
António Sérgio Silva ◽  
José Manuel Mendes ◽  
Tiago Araújo ◽  
Carlos Aroso ◽  
Pedro Barreiros
Keyword(s):  
Testing Machine ◽  
In Vitro Study ◽  
Fracture Site ◽  
Mechanical Resistance ◽  
Mean Values ◽  
Maximal Torsion ◽  
Significant Difference ◽  
Bone Preservation ◽  
Prosthetic Implant

Micromovements of the implant-abutment connection influence peri-implant bone preservation. The maximal torque after a cycle of implant prosthetic screw tightening using original components of different manufacturers and replicas produced by other companies is evaluated and quantified in this study. A total of 30 Mis Seven® standard platform implants and 30 interfaces were used, and 30 standard platform screws were tested, 10 Mis®, 10 Iconekt®, and 10 Exaktus®. The screws were tightened with an MIS® torquemeter until their respective fracture, and the fracture point was measured through the equipment’s load cell, CS-Dental Testing Machine®. The screws were analyzed under an Olympus® SZ61 microscope. The fracture points were recorded and compared among all samples. To compare the mean values of the fracture torques, t-tests were performed using the reference values associated with each brand and the sample results. The variable “Place of Fracture” between the original Mis® brand and the Exaktus® replica compared to the Iconekt® replica presented a statistically significant difference (p < 0.001). When analyzing the variable “Fracture Torque,” although it was verified that the replica screws (Iconekt® and Exaktus®) had a lower maximum torque, 65.11 Nm and 62.89 Nm, respectively, compared to the original Mis® brand (70 Nm and 69 Nm), there were no statistically significant differences p > 0.05. Nonoriginal screws did not present different fracture resistances compared to the original Mis® brand screws. The fracture site of Iconekt® screws showed a different pattern compared to the other brands.

scholarly journals Evaluation of the effect of calcium hydroxide and endodontic irrigants on the push-out bond strength of fiber post - an in vitro study

2018 ◽  
Vol 91 (4) ◽  
pp. 458-461
Author(s):  
Anjum Chaudhary ◽  
Mohit Kumar ◽  
Sonali Taneja
Keyword(s):  
Bond Strength ◽  
Calcium Hydroxide ◽  
Testing Machine ◽  
In Vitro Study ◽  
Cervical Region ◽  
Control Group ◽  
P Value ◽  
Fiber Post ◽  
Push Out

Background. In recent years, fibre-reinforced composite posts have been proposed for the restoration of root filled teeth as an alternative to pre-fabricated posts or metal dowels.Aims and objectives. The aim of the study was to analyze the effect of endodontic irrigants used for removal of calcium hydroxide on the push-out bond strength of fiber posts to root canal dentin.Methods. Forty human permanent single-rooted mandibular premolars with relatively straight roots were taken and access cavities were prepared and biomechanical preparation done using Rotar Y protaper file till size F2. The samples were divided into Experimental group and Control group. In Experimental groups Intracanal dressing of calcium hydroxide was removed by 2.5% NaOCl and 17% EDTA (Group1), MTAD (Group II) and Qmix (Group III). Control group did not receive Intracanal calcium hydroxide dressing. Canals were obturated using size F2 protaper gutta-percha points and AH plus sealer. After storage for 24 hours, post space was prepared. Forty Tenax fiber post (Coltene) were cemented with Rely X U200 resin. The roots were then transversally sectioned into 3 slices of 1mm thickness corresponding to cervical, middle and apical third. The slices obtained were subjected to micro-push-out bond strength test using a universal testing machine. The data obtained was subjected to statistical analysis using One-Way ANOVA test. P value of .05 was considered as statistically significant level.Results. The mean push-out bond strength values for controls, NaOCl/EDTA, MTAD and QMIX group at cervical third were 10.17, 15.84, 20.39 and 20.98 whereas at apical third 4.78, 8.85, 11.66 and 12.10.Conclusion. Qmix showed higher push-out bond strength values followed by MTAD and NaOCl/EDTA. All the groups showed lowest push-out bond strength values in the apical third followed by middle and the maximum in the cervical region.

scholarly journals Comparison of Fracture Resistance in Thermal and Self-Curing Acrylic Resins—An In Vitro Study

Polymers ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1234
Author(s):  
António Sérgio Silva ◽  
Aurora Carvalho ◽  
Pedro Barreiros ◽  
Juliana de Sá ◽  
Carlos Aroso ◽  
...  
Keyword(s):  
Fracture Resistance ◽  
Research Work ◽  
Testing Machine ◽  
In Vitro Study ◽  
Dimensional Accuracy ◽  
Acrylic Resin ◽  
Thermosetting Resins ◽  
Acrylic Resins ◽  
The Difference

Thermal and self-curing acrylic resins are frequently and versatilely used in dental medicine since they are biocompatible, have no flavor or odor, have satisfactory thermal qualities and polishing capacity, and are easy and fast. Thus, given their widespread use, their fracture resistance behavior is especially important. In this research work, we comparatively analyzed the fracture resistance capacity of thermo and self-curing acrylic resins in vitro. Materials and Methods: Five prosthesis bases were created for each of the following acrylic resins: Lucitone®, ProBase®, and Megacryl®, which were submitted to different forces through the use of the CS® Dental Testing Machine, usually mobilized in the context of fatigue tests. To this end, a point was defined in the center of the anterior edge of the aforementioned acrylic resin bases, for which the peak tended until a fracture occurred. Thermosetting resins were, on average, more resistant to fracture than self-curable resins, although the difference was not statistically significant. The thermosetting resins of the Lucitone® and Probase® brands demonstrated behavior that was more resistant to fracture than the self-curing homologues, although the difference was not statistically significant. Thermosetting resins tended to be, on average, more resistant to fracture and exhibited the maximum values for impact strength, compressive strength, tensile strength, hardness, and dimensional accuracy than self-curing resins, regardless of brand.

Sign in / Sign up

Export Citation Format

Share Document