scholarly journals Formulation and evaluation of mucoadhesive buccal patch of acyclovir utilizing inclusion phenomenon

2011 ◽  
Vol 47 (4) ◽  
pp. 887-897 ◽  
Author(s):  
Ankita Saxena ◽  
Gulab Tewari ◽  
Shubhini Awasthi Saraf
Keyword(s):  
Oral Cavity ◽  
Inclusion Complex ◽  
In Vitro Release ◽  
Methyl Cellulose ◽  
Molar Ratio ◽  
Ps Ii ◽  
Inclusion Phenomenon ◽  
Release Data ◽  
Poly Ethylene

Mucoadhesive buccal patch releasing drug in the oral cavity at a predetermined rate may present distinct advantages over traditional dosage forms, such as tablets, gels and solutions. A buccal patch for systemic administration of acyclovir in the oral cavity was developed using polymers hydroxy propyl methyl cellulose (K4M), hydroxy propyl methyl cellulose (K15M), sodium carboxy methyl cellulose and poly vinyl pyrolidone (K30), plasticizer poly ethylene glycol (400) and a backing membrane of Eudragit (RL100). The films were evaluated in terms of swelling, residence time, mucoadhesion, release, and organoleptic properties. The optimized films showed lower release as compared to controlled drug delivery systems. Hence, an inclusion complex of acyclovir was prepared with hydrophilic polymer hydroxylpropyl beta-cyclodextrin in the molar ratio of 1:1. The inclusion complex was characterized by optical microscopy, FAB mass spectroscopy, and FTIR spectroscopy. Patches formulated with the acyclovir inclusion complex were evaluated along the same lines as those containing acyclovir alone. The in vitro release data revealed a substantial increase from 64.35% to 88.15% in the case of PS I and PS II batches, respectively, confirming the successful use of inclusion complexes for the formulation of buccal patch of acyclovir.

Influence of β-Cyclodextrin and Hydroxypropyl-β-Cyclodextrin on Enhancement of Solubility and Dissolution of Isradipine

2017 ◽  
Vol 10 (3) ◽  
pp. 3752-3757
Author(s):  
Narendar D ◽  
Ettireddy S
Keyword(s):  
Inclusion Complex ◽  
Dissolution Rate ◽  
Solid Dispersions ◽  
Physical Stability ◽  
Molecular Complexes ◽  
In Vitro Dissolution ◽  
Molar Ratio ◽  
Phase Solubility ◽  
Cyclodextrin Complexation

The content of this investigation was to study the influence of β-cyclodextrin and hydroxy propyl-β-cyclodextrin complexation on enhancement of solubility and dissolution rate of isradipine. Based on preliminary phase solubility studies, solid complexes prepared by freeze drying method in 1:1 molar ratio were selected and characterized by DSC for confirmation of complex formation. Prepared solid dispersions were evaluated for drug content, solubility and in vitro dissolution. The physical stability of optimized formulation was studied at refrigerated and room temperature for 2 months. Solid state characterization of optimized complex performed by DSC and XRD studies.  Dissolution rate of isradipine was increased compared with pure drug and more with HP-β-CD inclusion complex than β-CD. DSC and XRD analyzes that drug was in amorphous form, when the drug was incorporated as isradipine β-CD and HP-β-CD inclusion complex. Stability studies resulted in low or no variations in the percentage of complexation efficiency suggesting good stability of molecular complexes. The results conclusively demonstrated that the enhancement of solubility and dissolution rate of isradipine by drug-cyclodextrin complexation was achieved.   

Formulation and In vitro Release Characterization of Metoprolol Succinate Extended Release Tablets

2012 ◽  
Vol 4 (4) ◽  
pp. 1537-1543
Author(s):  
Sakthikumar T ◽  
Rajendran N N ◽  
Natarajan R
Keyword(s):  
Drug Release ◽  
Extended Release ◽  
In Vitro Release ◽  
Methyl Cellulose ◽  
Wet Granulation ◽  
Direct Compression ◽  
Metoprolol Succinate ◽  
Extended Release Formulations ◽  
Vitro Release

The present study was aimed to develop an extended release tablet of metoprolol Succinate for the treatment of hypertension.  Four extended release formulations F1-F4 were developed using varying proportions of hydroxylpropyl-methylcellulose K100M, sodium carboxy methyl cellulose and Eudragit L30 D55 by wet granulation. Five extended release formulations F5-F9 containing HPMC K100M and HPMC 5 cps in varying concentration were developed by direct compression. The physicochemical and in vitro release characteristics of all the formulations were investigated and compared. Two formulations, F7 and F8 have shown not more 25% drug release  in 1st h, 20%-40% drug release at 4th hour, 40%-60% drug release at 8th hour and not less than 80% at 20th hour and the release pattern conform with USP specification for 24 hours extended release formulation. It can be conclusively stated that optimum concentration of HPMC K100M (58%-65%) by direct compression method can yield an extended release of metoprolol succinate for 24 hours.

scholarly journals Comparative Analysis of Morphological and Release Profiles in Ocular Implants of Acetazolamide Prepared by Electrospinning

Pharmaceutics ◽  
2021 ◽  
Vol 13 (2) ◽  
pp. 260
Author(s):  
Mariana Morais ◽  
Patrícia Coimbra ◽  
Maria Eugénia Pina
Keyword(s):  
Drug Release ◽  
In Vitro Release ◽  
Morbidity Rate ◽  
Coating Film ◽  
Sustained Drug Release ◽  
Coated Implant ◽  
Poly Ethylene ◽  
Coaxial Fibers ◽  
Release Profiles

The visual impairment that often leads to blindness causes a higher morbidity rate. The goal of this work is to create a novel biodegradable polymeric implant obtained from coaxial fibers containing the dispersed drug—acetazolamide—in order to achieve sustained drug release and increase patient compliance, which is of the highest importance. Firstly, during this work, uncoated implants were produced by electrospinning, and rolled in the shape of small cylinders that were composed of uniaxial and coaxial fibers with immobilized drug inside. The fibers were composed by PCL (poly ε-caprolactone) and Lutrol F127 (poly (oxyethylene-b-oxypropylene-b-oxyethylene)). The prepared implants exhibited a fast rate of drug release, which led to the preparation of new implants incorporating the same formulation but with an additional coating film prepared by solvent casting and comprising PCL and Lutrol F127 or PCL and Luwax EVA 3 ((poly (ethylene-co-vinyl acetate)). Implants were characterized and in vitro release profiles of acetazolamide were obtained in phosphate buffered saline (PBS) at 37 °C. The release profile of the acetazolamide from coated implant containing Luwax EVA 3 is considerably slower than what was observed in case of coated implants containing Lutrol F127, allowing a sustained release and an innovation relatively to other ocular drug delivery systems.

Synthesis, characterization and in vitro release studies of a new acetazolamide–HP-β-CD–TEA inclusion complex

2008 ◽  
Vol 43 (3) ◽  
pp. 464-470 ◽  
Author(s):  
Gladys E. Granero ◽  
Marcos M. Maitre ◽  
Claudia Garnero ◽  
Marcela R. Longhi
Keyword(s):  
Inclusion Complex ◽  
In Vitro Release ◽  
Release Studies ◽  
Vitro Release

scholarly journals NANO-VESICLES OF SALBUTAMOL SULPHATE IN METERED DOSE INHALERS: FORMULATION, CHARACTERIZATION AND IN VITRO EVALUATION

2017 ◽  
Vol 9 (6) ◽  
pp. 100 ◽  
Author(s):  
Mona G. Arafa ◽  
Bassam M. Ayoub
Keyword(s):  
In Vitro Release ◽  
Pulmonary Delivery ◽  
Entrapment Efficiency ◽  
Reversed Phase ◽  
Molar Ratio ◽  
Metered Dose Inhalers ◽  
Salbutamol Sulphate ◽  
Novel Approach ◽  
Metered Dose

Objective: The present work was aimed to prepare niosomes entrapping salbutamol sulphate (SS) using reversed phase evaporation method (REV).Methods: Niosomes were prepared by mixing span 60 and cholesterol in 1:1 molar ratio in chloroform, SS in water was then added to organic phase to form niosomal SS. Formulations after evaporation of chloroform, freeze centrifuged then lyophilized, were evaluated for particles size, polydispersity index (Pdi), zeta-potential, morphology, entrapment efficiency (EE%) and in vitro release. For pulmonary delivery; metered dose inhalers (MDI) were prepared by suspending SS niosomes equivalent to 20 mg SS in hydrofluoroalkane (HFA). The metered valve was investigated for leakage rate, the total number of puffs/canister, weight/puff, dose uniformity and particle size.Results: The results showed spherical niosomes with 400-451 nm particles that entrapped 66.19% of SS. 76.54±0.132% SS release from niosomes that showed a controlled release profile for 8h. The leakage test was not exceeding 4 mg/3 d, the number of puffs were up to 200puffs/canister, the dose delivered/puff was 0.1 mg and 0.64-4.51μm niosomal aerosol.Conclusion: The results indicate an encouraging strategy to formulate a controlled drug delivery by entrapping (SS) in niosomes which could be packaged into (MDI) that met the requirements of (USP) aerosols guidelines which offering a novel approach to respiratory delivery.

scholarly journals Formulation of a modified release metformin. HCl matrix tablet: influence of some hydrophilic polymers on release rate and in-vitro evaluation

2011 ◽  
Vol 47 (3) ◽  
pp. 483-493
Author(s):  
John Rojas ◽  
Cesar González ◽  
Carolina Rico ◽  
Oswaldo Saez
Keyword(s):  
In Vitro Release ◽  
Methyl Cellulose ◽  
Gum Arabic ◽  
Hydrophilic Polymers ◽  
Metformin Hydrochloride ◽  
Matrix Tablet ◽  
Modified Release ◽  
Basal Plasma ◽  
Cubic Model

Metformin hydrochloride is an antidiabetic agent which improves glucose tolerance in patients with type 2 diabetes and reduces basal plasma levels of glucose. In this study, a simplex centroid experimental design with 69 runs was used to select the best combination of some hydrophilic polymers that rendered a 24 h in-vitro release profile of metformin.HCl. The Korsmeyer-Peppas model was used to model the dissolution profiles since it presented the best fit to the experimental data. Further, a cubic model predicted the best formulation of metformin.HCl containing polyvinyl pyrrolidone, ethyl cellulose, hydroxypropyl methyl cellulose, carrageenan, sodium alginate, and gum arabic at 6.26, 68.7, 6.26, 6.26, 6.26 and 6.26 % levels, respectively. The validation runs confirmed the accuracy of the cubic model with six components for predicting the best set of components which rendered a once-a-day modified release hydrophilic matrix tablet in compliance with the USP specifications.

scholarly journals Preparation and characterization of domperidone nanoparticles for dissolution improvement

2018 ◽  
Vol 27 (1) ◽  
pp. 39-52
Author(s):  
Mohammed Sabar Al-lami ◽  
Malath H. Oudah ◽  
Firas A. Rahi
Keyword(s):  
Particle Size ◽  
Average Particle Size ◽  
In Vitro Release ◽  
Methyl Cellulose ◽  
Precipitation Method ◽  
Average Particle ◽  
Antisolvent Precipitation ◽  
Stirring Time

This study was carried out to prepare and characterize domperidone nanoparticles to enhance solubility and the release rate. Domperidone is practically insoluble in water and has low and an erratic bioavailability range from 13%-17%. The domperidone nanoparticles were prepared by solvent/antisolvent precipitation method at different polymer:drug ratios of 1:1 and 2:1 using different polymers and grades of poly vinyl pyrolidone, hydroxy propyl methyl cellulose and sodium carboxymethyl cellulose as stabilizers. The effect of polymer type, ratio of polymer:drug, solvent:antisolvent ratio, stirring rate and stirring time on the particle size, were investigated and found to have a significant (p? 0.05) effect on particle size. The best formula was obtained with lowest average particle size of 84.05. This formula was studied for compatibility by FTIR and DSC, surface morphology by FESEM and crystalline state by XRPD. Then domperidone nanoparticles were formulated into a simple capsule dosage form in order to study of the in vitro release of drug from nanoparticles in comparison raw drug and mixture of polymer:drug ratios of 2:1. The release of domperidone from best formula was highly improved with a significant (p? 0.05) increase.

scholarly journals A study on the influence of the formulation factors on in vitro release of ketoprofen from sustained release tablets

2021 ◽  
Vol 14 (1) ◽  
pp. 41-48
Author(s):  
Larisa Cimpoaie ◽  
◽  
Luca Liviu Rus ◽  
Rareș Iuliu Iovanov ◽  
◽  
...  
Keyword(s):  
Sustained Release ◽  
In Vitro Release ◽  
Matrix Tablets ◽  
Inert Matrix ◽  
Sustained Release Tablets ◽  
Formulation Factors ◽  
Release Data ◽  
Vitro Release ◽  
Inert Matrix Tablets

Objectives. The aim of this study was to investigate the influence of formulation factors on in vitro release of ketoprofen from sustained release inert matrix tablets. Materials and methods. Laboratory scale, Ketoprofen sustained release inert matrix tablets were manufactured using Kollidon® SR as matrix formator, by direct tableting of powder blends. The influence of the formulation factors (X1 – matrix formator excipient and X2 – diluent type) on in vitro release of ketoprofen from sustained release tablets was studied by using a full factorial 23 experimental plan. Outcomes. Pharmacotechnical characterization of manufactured laboratory scale batches was performed and all 12 batches fulfilled European Pharmacopeia requests. In vitro release showed a sustained release profile in all cases. Variance analysis (ANOVA) showed a good correlation between experimental conditions and answers. In vitro release testing was performed in phosphate buffer pH = 7.4. Percentage release was determined spectrophotometrically at 258 nm. A decrease in the rate of in vitro release was registered, up to 4 h and 6 h when lactose DC and mannitol DC were used as diluents, respectively. Isomalt DC has increased the rate of in vitro release up to 6 h. Conclusions. In vitro release data, corresponding to formulation N1 shoed a good fitting with Weitbull, Korshmeyer-Peppas and Higuchi models while in vitro release data corresponding to formulation N8 presented a good fitting with Weitbull and Korsmeyer-Peppas. In case of formulations N1 and N8 a non-Fickian diff usion mechanism seems to be involved in drug release from the matrix tablets.

EFFECT OF DRUG TO B-CYCLODEXTRIN RATIO AND METHOD OF COMPLEXATION IN THE DEVELOPMENT OF B-CYCLODEXTRIN INCLUSION COMPLEX OF OFLOXACIN

INDIAN DRUGS ◽  
2013 ◽  
Vol 50 (12) ◽  
pp. 34-40
Author(s):  
M Panchpuri ◽  
◽  
D Singh ◽  
A Semalty ◽  
M. Semalty
Keyword(s):  
Inclusion Complex ◽  
In Vitro Dissolution ◽  
Molar Ratio ◽  
Dissolution Profile ◽  
Scanning Calorimetry ◽  
Dissolution Study ◽  
Drug Content ◽  
Kneading Method ◽  
Made In

Ofloxacin, a second generation fluoroquinolone, shows poor aqueous solubility and dissolution profile. Thus, ofloxacin–β-cyclodextrin complexes were prepared to improve its dissolution by imparting an environment of improved hydrophilicity. Ofloxacin was complexed with β-cyclodextrin (in 1:1 and 1:2 molar ratio) by two different methods namely, solvent evaporation and kneading method. These inclusion complexes were evaluated for solubility, drug content, scanning electron microscopy (SEM), differential scanning calorimetry (DSC), X ray powder diffraction (XRPD) and in vitro dissolution study. The highest drug content (35.45%) was found in complex made by kneading method (OK1:1) in 1:1 molar ratio. All the complexes OSE1:1, OSE1:2, OK1:1, OK1:2 were found to be showing rough and porous surface morphology in SEM. Solubility as well as the dissolution of the complexes was found to be improved. Complex prepared by kneading method in 1:1 molar ratio (OK1:1) showed a marked improvement in percent drug release (88.94%) than that of pure drug (54.22%) at the end of 1 hour in dissolution study. FTIR, DSC and XRPD data confirmed the formation of inclusion complex. It was concluded that the complex made in 1:1 molar ratio (irrespective of the method) showed better solubility and dissolution profile as compared to complex made in 1:2 molar ratio.

COMPARATIVE EVALUATION OF POLYMER COMBINATION IN THE DESIGN OF BRIMONIDINE TARTRATE OCULAR INSERTS

INDIAN DRUGS ◽  
2012 ◽  
Vol 49 (07) ◽  
pp. 30-35
Author(s):  
P Goudanavar ◽  
◽  
N Ambhore ◽  
D. Hiremath ◽  
R Udupi
Keyword(s):  
Polymer Concentration ◽  
In Vitro Release ◽  
Methyl Cellulose ◽  
Carboxymethyl Chitosan ◽  
Moisture Loss ◽  
In Vivo Release ◽  
Weight Variation ◽  
Brimonidine Tartrate

Brimonidine is an anti-glaucoma agent useful in treatment of intraocular pressure. In the present study an attempt was made to formulate ophthalmic inserts of brimonidine tartrate (BT) in combination with polymers like methylcellulose, carboxymethyl chitosan and HPMC. Prepared ocular films were evaluated for uniformity in thickness, weight variation, % moisture absorption, % moisture loss, in vitro and in vivo release studies. The physical characteristics of the films were found to be within acceptable limits. The study confirmed that brimonidine tartrate can be delivered through films made of methyl cellulose, carboxymethyl chitosan and HPMC combination matrix cast with ethyl cellulose (EC). In vitro release study revealed that increasing the proportion of polymer concentration decreased the rate of release of brimonidine tartrate. In vivo release profile of ocular inserts revealed controlled release of drug over a period of 24 h. Optimized formulation CH3 was evaluated for in vivo release characteristics using rabbits as animal model. The optimized formulation CH3 was found to be stable at accelerated storage condition of 40/75 % RH.

Sign in / Sign up

Export Citation Format

Share Document