scholarly journals Techno-Determinism in Private Law: Influence of Bioprinting on Developing the Concept of Protecting the Right to Digital Image

Author(s):  
D. E. Bogdanov

Introduction: the new technological revolution became a trigger in the development of the non-pecuniary benefits concept. In the context of digital transformation, personal privacy protection appears to be a serious problem. A person is found to be in a vulnerable position facing challenges of the new digital reality. This could be illustrated by the example of bioprinting since this technology is connected with digitalization of the human body and creation of its digital three-dimensional model. As a result, a person is becoming dependent on their three-dimensional digital embodiment in implementing their rights to life and health. Evolution in the concept of the right to personal image through recognition of the right to digital image appears as the private law response to the technological challenges. Purpose: to identify and analyze the major problems related to protection of the human right to digital image in bioprinting, as well as to determine an effective model of tort liability for encroachment on the personal digital image associated with the use of bioprinting technologies. Methods: dialectical, formal logical, functional, and other general scientific research methods, as well as special legal methods, including comparative legal and formal legal techniques. Results: the author has studied legal and philosophical problems associated with the bioprinting technology influence on the concept of protecting non-pecuniary benefits and its development; identified a trend associated with the evolution of the human right to digital image; considered the models of tort liability for encroachment on the personal digital image in European law in the comparative legal aspect; formulated prognostic conclusions concerning the model of liability for damage caused by violation of the right to digital image in Russian law. Conclusions: information about a person objectified in a digital three-dimensional model (CAD-file) deserves special protection. The possibility of access and use of such information about a person creates serious risks of causing damage to them. A person’s vulnerable position in bioprinting technologies indicates the need to recognize an absolute non-pecuniary right with a person to their digital image registered in the corresponding digital model (CAD-file). The philosophical and legal concept of human vulnerability serves as a theoretical foundation for the elaboration of solutions aimed at creating an efficient set of tools for protecting the human right to digital image. This concept was manifested in the European law in expanding the possibility of compensation for non-pecuniary damage, its presumption in case of encroachment on non-pecuniary benefits, as well as establishment of the no-fault liability standard. It is necessary to introduce in Russian legislation a special tort establishing the no-fault liability standard for damage caused by encroachment on a personal digital image. Presumption of moral damage in such encroachments, as well as the possibility of recovering exemplary damages from a delinquent, would correspond to the goals of general and special prevention.

2020 ◽  
Vol 2020 ◽  
pp. 1-14
Author(s):  
Xuwei Zhao ◽  
Keguo Sun ◽  
Weiping Xu ◽  
Li Tang ◽  
Haisu Wang ◽  
...  

In order to ensure the safety of the Daling tunnel with extralarge section and small space, the three-dimensional model of blasting dynamic simulation had been established and verified. Then, the model was used to analyze the influence of the surrounding rock characteristics and blasting design parameters on the blasting vibration of the first hole, and the analysis of the sensitivity of each factor was carried out. The results showed that blasting of the second hole had a serious impact on the safety of the first hole lining structure. Based on the safety threshold and analysis of sensitivity, the explosive velocity, charge density, and digging length were selected as the key parameters affecting the safety of the tunnel structure. Meanwhile, the corresponding engineering measure was taken based on the results of sensitivity and the actual situation on site, and, after that, the maximum PPV of the right wall of the first hole had been reduced to 9.3 cm/s, which effectively guaranteed the safe construction of the tunnel.


2011 ◽  
Vol 71-78 ◽  
pp. 1578-1581
Author(s):  
Jun Peng Shao ◽  
Chong Li ◽  
Xiao Qiu Xu ◽  
Xiao Dong Yu ◽  
Bo Wu ◽  
...  

In order to research the temperature distribution law of the interstitial oil film on the hydrostatic center rack, the interstitial oil film on the hydrostatic center rack is taken as the research subject. Firstly, a three-dimensional model of the interstitial oil film is built by UG software. Secondly, the constructed three-dimensional model is meshed by ICEM CFD software. Lastly, the constructed finite element model is simulated using the finite element analysis software ANSYS CFX. The results of the simulation show that the temperature near the oil seal edge is higher than oil chamber and oil-returning slot. If the shaft parts rotate clockwise, the temperature of the right high-temperature zone is higher than the left. The research results provide a theoretical basis for the research on the thermal distortion of the middle pillow.


Skull Base ◽  
2008 ◽  
Vol 18 (S 01) ◽  
Author(s):  
Akio Morita ◽  
Toshikazu Kimura ◽  
Shigeo Sora ◽  
Kengo Nishimura ◽  
Hisayuki Sugiyama ◽  
...  

2019 ◽  
Vol 10 (6) ◽  
pp. 1382-1394
Author(s):  
R. Vijayalakshmi ◽  
V. K. Soma Sekhar Srinivas ◽  
E. Manjoolatha ◽  
G. Rajeswari ◽  
M. Sundaramurthy

Sign in / Sign up

Export Citation Format

Share Document