scholarly journals A life cycle assessment of e-books and printed books in South Africa

2016 ◽  
Vol 27 (2) ◽  
pp. 68 ◽  
Author(s):  
Vinesh Naicker ◽  
Brett Cohen
Keyword(s):  
South Africa ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Energy Demand ◽  
Digital System ◽  
Impact Categories ◽  
Cumulative Energy ◽  
Land Occupation ◽  
Printed Books ◽  
The Impact

This paper presents the results of a study comparing the life cycle environmental impacts and cumulative energy demands of reading printed books (print system) with those of reading e-books from an Apple Air iPad (digital system), with a specific focus on production of books and use of both options in South Africa. The two systems were compared using the ReCiPe midpoint and cumulative energy demand methods. The findings, which are consistent with international findings, demonstrate that the print system has lower impacts than the digital system in the impact categories of freshwater eutrophication, freshwater ecotoxicity, marine ecotoxicity and metal depletion, whilst the digital system has lower impacts in the categories of climate change, ozone depletion, terrestrial acidification, marine eutrophication, human toxicity, photochemical oxidant formation, particulate matter formation, terrestrial ecotoxicity, ionising radiation, agricultural land occupation, urban land occupation, natural land transformation, water depletion and fossil depletion. The major processes contributing to energy demand and environmental impacts of the print system were paper production and printing. For the digital system the major contributing processes were the production of the iPad and e-book reading. Coal-based electricity and coal-miningrelated activities featured prominently in both systems, affecting environmental impacts and energy demand of products and services in South Africa. A change in the electricity mix to be less coal-intensive reduced the impacts of both systems. Finally, the products demonstrate that relatively few additional readers result in printed books becoming preferable to e-books in almost all impact categories, suggesting the need to consider housing print books in libraries to reduce their relative environmental impacts.

scholarly journals Life Cycle Assessment of Maize-Germ Oil Production and The Use of Bioenergy to Mitigate Environmental Impacts: A Gate-To-Gate Case Study

Resources ◽  
2019 ◽  
Vol 8 (2) ◽  
pp. 60 ◽  
Author(s):  
Mattias Gaglio ◽  
Elena Tamburini ◽  
Francesco Lucchesi ◽  
Vassilis Aschonitis ◽  
Anna Atti ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Energy Demand ◽  
Food Industry ◽  
Renewable Energy Sources ◽  
Environmental Benefits ◽  
Impact Categories ◽  
Industrial Processing ◽  
The Impact

The need to reduce the environmental impacts of the food industry is increasing together with the dramatic increment of global food demand. Circulation strategies such as the exploitation of self-produced renewable energy sources can improve ecological performances of industrial processes. However, evidence is needed to demonstrate and characterize such environmental benefits. This study assessed the environmental performances of industrial processing of maize edible oil, whose energy provision is guaranteed by residues biomasses. A gate-to-gate Life Cycle Assessment (LCA) approach was applied for a large-size factory of Northern Italy to describe: (i) the environmental impacts related to industrial processing and (ii) the contribution of residue-based bioenergy to their mitigation, through the comparison with a reference system based on conventional energy. The results showed that oil refinement is the most impacting phase for almost all the considered impact categories. The use of residue-based bioenergy was found to drastically reduce the emissions for all the impact categories. Moreover, Cumulative Energy Demand analysis revealed that the use of biomass residues increased energy efficiency through a reduction of the total energy demand of the industrial process. The study demonstrates that the exploitation of residue-based bioenergy can be a sustainable solution to improve environmental performances of the food industry, while supporting circular economy.

scholarly journals Exploring sustainability potentials in vineyards through LCA? Evidence from farming practices in South Africa

2021 ◽  
Author(s):  
V. Russo ◽  
A. E. Strever ◽  
H. J. Ponstein
Keyword(s):  
South Africa ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Human Health ◽  
South African ◽  
Wine Grape ◽  
Impact Categories ◽  
Farming Practices ◽  
Manual Labour ◽  
The Impact

Abstract Purpose Following the urgency to curb environmental impacts across all sectors globally, this is the first life cycle assessment of different wine grape farming practices suitable for commercial conventional production in South Africa, aiming at better understanding the potentials to reduce adverse effects on the environment and on human health. Methods An attributional life cycle assessment was conducted on eight different scenarios that reduce the inputs of herbicides and insecticides compared against a business as usual (BAU) scenario. We assess several impact categories based on ReCiPe, namely global warming potential, terrestrial acidification, freshwater eutrophication, terrestrial toxicity, freshwater toxicity, marine toxicity, human carcinogenic toxicity and human non-carcinogenic toxicity, human health and ecosystems. A water footprint assessment based on the AWARE method accounts for potential impacts within the watershed. Results and discussion Results show that in our impact assessment, more sustainable farming practices do not always outperform the BAU scenario, which relies on synthetic fertiliser and agrochemicals. As a main trend, most of the impact categories were dominated by energy requirements of wine grape production in an irrigated vineyard, namely the usage of electricity for irrigation pumps and diesel for agricultural machinery. The most favourable scenario across the impact categories provided a low diesel usage, strongly reduced herbicides and the absence of insecticides as it applied cover crops and an integrated pest management. Pesticides and heavy metals contained in agrochemicals are the main contributors to emissions to soil that affected the toxicity categories and impose a risk on human health, which is particularly relevant for the manual labour-intensive South African wine sector. However, we suggest that impacts of agrochemicals on human health and the environment are undervalued in the assessment. The 70% reduction of toxic agrochemicals such as Glyphosate and Paraquat and the 100% reduction of Chlorpyriphos in vineyards hardly affected the model results for human and ecotoxicity. Our concerns are magnified by the fact that manual labour plays a substantial role in South African vineyards, increasing the exposure of humans to these toxic chemicals at their workplace. Conclusions A more sustainable wine grape production is possible when shifting to integrated grape production practices that reduce the inputs of agrochemicals. Further, improved water and related electricity management through drip irrigation, deficit irrigation and photovoltaic-powered irrigation is recommendable, relieving stress on local water bodies, enhancing drought-preparedness planning and curbing CO2 emissions embodied in products.

scholarly journals Environmental impacts of European trade: interpreting results of process-based LCA and environmentally extended input–output analysis towards hotspot identification

2019 ◽  
Vol 25 (12) ◽  
pp. 2432-2450 ◽  
Author(s):  
Antoine Beylot ◽  
Sara Corrado ◽  
Serenella Sala
Keyword(s):  
Life Cycle ◽  
Impact Assessment ◽  
Environmental Impacts ◽  
Impact Categories ◽  
Input Output ◽  
Output Analysis ◽  
Input Output Analysis ◽  
European Trade ◽  
The Impact ◽  
Modelling Approaches

Abstract Purpose Trade is increasingly considered a significant contributor to environmental impacts. The assessment of the impacts of trade is usually performed via environmentally extended input–output analysis (EEIOA). However, process-based life cycle assessment (LCA) applied to traded goods allows increasing the granularity of the analysis and may be essential to unveil specific impacts due to traded products. Methods This study assesses the environmental impacts of the European trade, considering two modelling approaches: respectively EEIOA, using EXIOBASE 3 as supporting database, and process-based LCA. The interpretation of the results is pivotal to improve the robustness of the assessment and the identification of hotspots. The hotspot identification focuses on temporal trends and on the contribution of products and substances to the overall impacts. The inventories of elementary flows associated with EU trade, for the period 2000–2010, have been characterized considering 14 impact categories according to the Environmental Footprint (EF2017) Life Cycle Impact Assessment method. Results and discussion The two modelling approaches converge in highlighting that in the period 2000–2010: (i) EU was a net importer of environmental impacts; (ii) impacts of EU trade and EU trade balance (impacts of imports minus impacts of exports) were increasing over time, regarding most impact categories under study; and (iii) similar manufactured products were the main contributors to the impacts of exports from EU, regarding most impact categories. However, some results are discrepant: (i) larger impacts are obtained from IO analysis than from process-based LCA, regarding most impact categories, (ii) a different set of most contributing products is identified by the two approaches in the case of imports, and (iii) large differences in the contributions of substances are observed regarding resource use, toxicity, and ecotoxicity indicators. Conclusions The interpretation step is crucial to unveil the main hotspots, encompassing a comparison of the differences between the two methodologies, the assumptions, the data coverage and sources, the completeness of inventory as basis for impact assessment. The main driver for the observed divergences is identified to be the differences in the impact intensities of goods, both induced by inherent properties of the IO and life cycle inventory databases and by some of this study’s modelling choices. The combination of IO analysis and process-based LCA in a hybrid framework, as performed in other studies but generally not at the macro-scale of the full trade of a country or region, appears a potential important perspective to refine such an assessment in the future.

scholarly journals Review on Life Cycle Assessment of Solar Photovoltaic Panels

Energies ◽  
2020 ◽  
Vol 13 (1) ◽  
pp. 252 ◽  
Author(s):  
Vincenzo Muteri ◽  
Maurizio Cellura ◽  
Domenico Curto ◽  
Vincenzo Franzitta ◽  
Sonia Longo ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Energy Demand ◽  
Geographical Location ◽  
Laboratory Research ◽  
Cumulative Energy ◽  
Cumulative Energy Demand ◽  
Environmental Indices ◽  
Silicon Based

The photovoltaic (PV) sector has undergone both major expansion and evolution over the last decades, and currently, the technologies already marketed or still in the laboratory/research phase are numerous and very different. Likewise, in order to assess the energy and environmental impacts of these devices, life cycle assessment (LCA) studies related to these systems are always increasing. The objective of this paper is to summarize and update the current literature of LCA applied to different types of grid-connected PV, as well as to critically analyze the results related to energy and environmental impacts generated during the life cycle of PV technologies, from 1st generation (traditional silicon based) up to the third generation (innovative non-silicon based). Most of the results regarded energy indices like energy payback time, cumulative energy demand, and primary energy demand, while environmental indices were variable based on different scopes and impact assessment methods. Moreover, the review work allowed to highlight and compare key parameters (PV type and system, geographical location, efficiency), methodological insights (functional unit, system boundaries, etc.), and energy/environmental hotspots of 39 LCA studies relating to different PV systems, in order to underline the importance of these aspects, and to provide information and a basis of comparison for future analyses.

Assessing the environmental impact of the dairy processing industry in the Republic of Ireland

2018 ◽  
Vol 85 (3) ◽  
pp. 396-399 ◽  
Author(s):  
William Finnegan ◽  
Jamie Goggins ◽  
Xinmin Zhan
Keyword(s):  
Life Cycle ◽  
Environmental Impact ◽  
Dairy Products ◽  
Energy Demand ◽  
Impact Categories ◽  
Cumulative Energy ◽  
Republic Of Ireland ◽  
Eutrophication Potential ◽  
Environmental Impact Categories ◽  
The Republic

This Research Communication describes the methodology used and the subsequent results obtained for an assessment of the environmental impact associated with the manufacture of dairy products in the Republic of Ireland. As the Irish dairy industry changes and grows, it is necessary to have a benchmark of the environmental performance of the sector if it is to remain sustainable in the future. In order to estimate the environmental impact, life cycle assessment has been implemented, which has been structured in accordance with the International Organisation for Standardisation guidelines. In this study, the environmental impact categories assessed are terrestrial acidification potential, cumulative energy demand, freshwater eutrophication potential, global warming potential, marine eutrophication potential and water depletion. The main Irish dairy products have been compared across these environmental impact categories in order to derive meaningful results. It is identified that packaging materials, particularly for infant formula, and energy usage, across each of the life cycle stages, should be targeted as these are the most significant contributors to the overall environmental impact.

scholarly journals Environmental and cost benefits of co-digesting food waste at wastewater treatment facilities

2020 ◽  
Author(s):  
Ben Morelli ◽  
Sarah Cashman ◽  
Xin (Cissy) Ma ◽  
Jason Turgeon ◽  
Sam Arden ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Life Cycle Cost ◽  
Water Reuse ◽  
Energy Demand ◽  
Energy Requirement ◽  
Baseline Scenario ◽  
Cumulative Energy ◽  
Cumulative Energy Demand

Abstract The wastewater industry is undergoing a paradigm shift from focusing solely on treatment to incorporating concepts aimed at mitigating environmental impacts such as energy and nutrient recovery and water reuse. This study uses life cycle assessment and life cycle cost analysis to investigate the effect of expanding anaerobic digestion (AD) capacity and adding combined heat and power on environmental and cost indicators at a mid-sized wastewater treatment facility (WWTF) in Massachusetts, USA. Since 2014, Massachusetts has banned the disposal of organic waste from commercial organizations producing more than one ton of material per week. The WWTF's additional digester capacity allows the co-digestion of municipal solids with a food-based engineered bioslurry due to this ban. Study data were compiled for several AD feedstock quantity and performance scenarios, and compared to a baseline scenario representative of historic plant operations prior to co-digestion. Reductions in environmental impact are demonstrated for six of eight environmental impacts, including global climate change potential and cumulative energy demand. Eutrophication potential increases by 10 percent and 24 percent across assessed scenarios. Water use remains relatively constant across scenarios. Facility energy production increases dramatically with co-digestion, satisfying 100 percent of the WWTF's thermal energy requirement and producing surplus electricity assuming full AD capacity utilization.

scholarly journals Life cycle assessment of single-use and reusable plastic bottles in the city of Johannesburg

2021 ◽  
Vol 117 (11/12) ◽  
Author(s):  
Kunle I. Olatayo ◽  
Paul T. Mativenga
Keyword(s):  
South Africa ◽  
Life Cycle ◽  
Dominant Factor ◽  
Impact Categories ◽  
Local Conditions ◽  
Pet Bottles ◽  
Single Use ◽  
Life Cycle Impact ◽  
The Impact ◽  
The City

Polyethylene terephthalate (PET) bottles of water have experienced huge growth in demand and sales in South Africa. This expansion in use creates challenges as well as opportunities for managing the life cycle impact. The properties that make PET desirable for fluid-containing bottles have also made it highly resistant to environmental biodegradation. Reusable plastic bottles are now marketed as a solution to reduce the impact of single-use plastic bottles. We assessed the life cycle impact of single-use PET bottles and an alternative, reusable PET bottle based on consumption patterns in South Africa and the material flow and supply chain in the urban environment. This robust consideration of local conditions is important in evaluating the life cycle impact. In an examination of 13 impact categories, the reusable PET bottle had lower impact than the single-use bottle in all the impact categories examined. The mass of PET bottle material required to deliver the water needs at any given time is a dominant factor on the environmental burden. Extending the life of reusable bottles and designing lighter weight bottles would reduce their life cycle impact. Information obtained in evaluating alternatives to plastic water bottles can be valuable for providing a foundation assessment for policymakers and plastic bottle manufacturers to make informed choices and to focus on improvements in life cycle impact.

scholarly journals Impact of Service Life on the Environmental Performance of Buildings

Buildings ◽  
2019 ◽  
Vol 9 (1) ◽  
pp. 9 ◽  
Author(s):  
Shahana Janjua ◽  
Prabir Sarker ◽  
Wahidul Biswas
Keyword(s):  
Life Cycle ◽  
Service Life ◽  
Environmental Performance ◽  
Energy Demand ◽  
Cumulative Energy ◽  
Cumulative Energy Demand ◽  
Building Components ◽  
Environmental Performance Assessment ◽  
Increasing Demand ◽  
The Impact

The environmental performance assessment of the building and construction sector has been in discussion due to the increasing demand of facilities and its impact on the environment. The life cycle studies carried out over the last decade have mostly used an approximate life span of a building without considering the building component replacement requirements and their service life. This limitation results in unreliable outcomes and a huge volume of materials going to landfill. This study was performed to develop a relationship between the service life of a building and building components, and their impact on environmental performance. Twelve building combinations were modelled by considering two types of roof frames, two types of wall and three types of footings. A reference building of a 50-year service life was used in comparisons. Firstly, the service life of the building and building components and the replacement intervals of building components during active service life were estimated. The environmental life cycle assessment (ELCA) was carried out for all the buildings and results are presented on a yearly basis in order to study the impact of service life. The region-specific impact categories of cumulative energy demand, greenhouse gas emissions, water consumption and land use are used to assess the environmental performance of buildings. The analysis shows that the environmental performance of buildings is affected by the service life of a building and the replacement intervals of building components.

scholarly journals Environmental Performance of Residential Buildings: A Life Cycle Assessment Study in Saudi Arabia

2021 ◽  
Vol 13 (6) ◽  
pp. 3542
Author(s):  
Hatem Alhazmi ◽  
Abdulilah K. Alduwais ◽  
Thamer Tabbakh ◽  
Saad Aljamlani ◽  
Bandar Alkahlan ◽  
...  
Keyword(s):  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Energy Demand ◽  
Residential Buildings ◽  
Saudi Arabian ◽  
Impact Categories ◽  
Cumulative Energy ◽  
Cumulative Energy Demand

The building and construction sector has a huge impact on the environment because of the enormous amounts of natural resources and energy consumed during the life cycle of construction projects. In this study, we evaluated the potential environmental impact of the construction of a villa, from cradle to grave, in the Saudi Arabian context. Centrum voor Milieukunde Leiden (CML) for Centre of Environmental Science of Leiden University-IA baseline v3.03 methods were used to obtain the environmental profile for the impact categories, and Cumulative Energy Demand v1.09 was used to measure the embodied energy of the villa life cycle. The analyzed midpoint impact categories include global warming (GWP100a), ozone layer depletion (ODP), acidification (AP), eutrophication (EP), photochemical oxidation (POCP), and indicator cumulative energy demand (CED). The operation use phase of the villa was found to have the highest global warming potential and acidification with 2.61 × 106 kg CO2-eq and 1.75 × 104 kg SO2-eq, respectively. Sensitivity analysis was performed on the Saudi Arabian plans to increase the share of renewable sources and reduce the amount of electricity generated from hydrocarbons, which currently represents 46% of the total installed power, by 2032. The results showed that compared with the current electricity environmental impact, the CO2 emission from electricity will decrease by 53%, which represents a significant reduction in environmental impact. The findings will help with the life cycle assessment of structures during future planning and for energy conservation.

scholarly journals Life Cycle Assessment of an NMC Battery for Application to Electric Light-Duty Commercial Vehicles and Comparison with a Sodium-Nickel-Chloride Battery

2021 ◽  
Vol 11 (3) ◽  
pp. 1160
Author(s):  
Antonella Accardo ◽  
Giovanni Dotelli ◽  
Marco Luigi Musa ◽  
Ezio Spessa
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Environmental Impacts ◽  
Nickel Chloride ◽  
Impact Categories ◽  
Commercial Vehicles ◽  
Light Duty ◽  
Electric Light ◽  
The Impact

This paper presents the results of an environmental assessment of a Nickel-Manganese-Cobalt (NMC) Lithium-ion traction battery for Battery Electric Light-Duty Commercial Vehicles (BEV-LDCV) used for urban and regional freight haulage. A cradle-to-grave Life Cycle Inventory (LCI) of NMC111 is provided, operation and end-of-life stages are included, and insight is also given into a Life Cycle Assessment of different NMC chemistries. The environmental impacts of the manufacturing stages of the NMC111 battery are then compared with those of a Sodium-Nickel-Chloride (ZEBRA) battery. In the second part of the work, two electric-battery LDCVs (powered with NMC111 and ZEBRA batteries, respectively) and a diesel urban LDCV are analysed, considering a wide set of environmental impact categories. The results show that the NMC111 battery has the highest impacts from production in most of the impact categories. Active cathode material, Aluminium, Copper, and energy use for battery production are the main contributors to the environmental impact. However, when vehicle application is investigated, NMC111-BEV shows lower environmental impacts, in all the impact categories, than ZEBRA-BEV. This is mainly due to the greater efficiency of the NMC111 battery during vehicle operation. Finally, when comparing BEVs to a diesel LDCV, the electric powertrains show advantages over the diesel one as far as global warming, abiotic depletion potential-fossil fuels, photochemical oxidation, and ozone layer depletion are concerned. However, the diesel LDCV performs better in almost all the other investigated impact categories.

Sign in / Sign up

Export Citation Format

Share Document