scholarly journals The potential of South African timber products to reduce the environmental impact of buildings

2017 ◽  
Vol 113 (9/10) ◽  
Author(s):  
Philip L. Crafford ◽  
Melanie Blumentritt ◽  
C. Brand Wessels
Keyword(s):  
South Africa ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
South African ◽  
Green Building ◽  
Biogenic Carbon ◽  
Roof Truss ◽  
Timber Products ◽  
Steel Trusses

South Africa was the first country in Africa to implement a locally developed green building rating tool and has a growing number of rated green building projects. The method of life-cycle assessment can help to compare and assess the environmental performance of building products. At present, more than 70% of all sawn timber in South Africa is used in buildings, mainly in roof structures. Light gauge steel trusses have recently also been gaining market share. However, to date, no studies have been conducted that quantify and compare the environmental impacts of the different roof truss systems in South Africa. We thus compared several roof truss systems (South African pine, Biligom and light gauge steel) found in low- and medium-income house designs in South Africa using a simplified life-cycle assessment approach. Our results show that the two timber systems had overall the lowest environmental impact. Although the difference between the timber systems was small, light gauge steel had a 40% higher normalised impact over all assessed environmental impact categories. The benefit of biogenic carbon dioxide present in timber proved to play a significant positive role in the global warming potential impact and could even be further reduced if wood were used to generate energy at its end-of-life. This study demonstrates the potential advantage of using local timber products to reduce the environmental impact of the truss and building industry in South Africa.

scholarly journals Exploring sustainability potentials in vineyards through LCA? Evidence from farming practices in South Africa

2021 ◽  
Author(s):  
V. Russo ◽  
A. E. Strever ◽  
H. J. Ponstein
Keyword(s):  
South Africa ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Human Health ◽  
South African ◽  
Wine Grape ◽  
Impact Categories ◽  
Farming Practices ◽  
Manual Labour ◽  
The Impact

Abstract Purpose Following the urgency to curb environmental impacts across all sectors globally, this is the first life cycle assessment of different wine grape farming practices suitable for commercial conventional production in South Africa, aiming at better understanding the potentials to reduce adverse effects on the environment and on human health. Methods An attributional life cycle assessment was conducted on eight different scenarios that reduce the inputs of herbicides and insecticides compared against a business as usual (BAU) scenario. We assess several impact categories based on ReCiPe, namely global warming potential, terrestrial acidification, freshwater eutrophication, terrestrial toxicity, freshwater toxicity, marine toxicity, human carcinogenic toxicity and human non-carcinogenic toxicity, human health and ecosystems. A water footprint assessment based on the AWARE method accounts for potential impacts within the watershed. Results and discussion Results show that in our impact assessment, more sustainable farming practices do not always outperform the BAU scenario, which relies on synthetic fertiliser and agrochemicals. As a main trend, most of the impact categories were dominated by energy requirements of wine grape production in an irrigated vineyard, namely the usage of electricity for irrigation pumps and diesel for agricultural machinery. The most favourable scenario across the impact categories provided a low diesel usage, strongly reduced herbicides and the absence of insecticides as it applied cover crops and an integrated pest management. Pesticides and heavy metals contained in agrochemicals are the main contributors to emissions to soil that affected the toxicity categories and impose a risk on human health, which is particularly relevant for the manual labour-intensive South African wine sector. However, we suggest that impacts of agrochemicals on human health and the environment are undervalued in the assessment. The 70% reduction of toxic agrochemicals such as Glyphosate and Paraquat and the 100% reduction of Chlorpyriphos in vineyards hardly affected the model results for human and ecotoxicity. Our concerns are magnified by the fact that manual labour plays a substantial role in South African vineyards, increasing the exposure of humans to these toxic chemicals at their workplace. Conclusions A more sustainable wine grape production is possible when shifting to integrated grape production practices that reduce the inputs of agrochemicals. Further, improved water and related electricity management through drip irrigation, deficit irrigation and photovoltaic-powered irrigation is recommendable, relieving stress on local water bodies, enhancing drought-preparedness planning and curbing CO2 emissions embodied in products.

Life cycle assessment of an industrial water recycling plant

2002 ◽  
Vol 46 (9) ◽  
pp. 55-62 ◽  
Author(s):  
S.D. Pillay ◽  
E. Friedrich ◽  
C.A. Buckley
Keyword(s):  
South Africa ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Water Recycling ◽  
Industrial Water ◽  
Industrial Activity ◽  
Environmental Burdens

An industrial water recycling plant was recently commissioned in Durban, South Africa. As with any industrial activity there are environmental burdens associated with water recycling. To assess these burdens a relatively new environmental tool - the life cycle assessment (LCA) - was used. LCA is a systematic way to evaluate the environmental impact of a product or process. This study presents the environmental burdens associated with industrial water and identifies the areas for improvement for the processes involved for recycling water. It was shown that the majority of the environmental burdens for producing industrial water could be traced back to the consumption of electricity for the operation of the plant.

Packaging environmental impact on seafood supply chains: A review of life cycle assessment studies

2021 ◽  
Author(s):  
Cheila Almeida ◽  
Philippe Loubet ◽  
Tamíris Pacheco da Costa ◽  
Paula Quinteiro ◽  
Jara Laso ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Supply Chains

scholarly journals Life Cycle Assessment (LCA) of an Innovative Compact Hybrid Electrical-Thermal Storage System for Residential Buildings in Mediterranean Climate

2021 ◽  
Vol 13 (9) ◽  
pp. 5322
Author(s):  
Gabriel Zsembinszki ◽  
Noelia Llantoy ◽  
Valeria Palomba ◽  
Andrea Frazzica ◽  
Mattia Dallapiccola ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Mediterranean Climate ◽  
Residential Buildings ◽  
Renewable Energy Sources ◽  
Storage System ◽  
Hot Water ◽  
Electrical Consumption ◽  
The Impact

The buildings sector is one of the least sustainable activities in the world, accounting for around 40% of the total global energy demand. With the aim to reduce the environmental impact of this sector, the use of renewable energy sources coupled with energy storage systems in buildings has been investigated in recent years. Innovative solutions for cooling, heating, and domestic hot water in buildings can contribute to the buildings’ decarbonization by achieving a reduction of building electrical consumption needed to keep comfortable conditions. However, the environmental impact of a new system is not only related to its electrical consumption from the grid, but also to the environmental load produced in the manufacturing and disposal stages of system components. This study investigates the environmental impact of an innovative system proposed for residential buildings in Mediterranean climate through a life cycle assessment. The results show that, due to the complexity of the system, the manufacturing and disposal stages have a high environmental impact, which is not compensated by the reduction of the impact during the operational stage. A parametric study was also performed to investigate the effect of the design of the storage system on the overall system impact.

Life cycle assessment of peach transportation considering trade-off between food loss and environmental impact

2021 ◽  
Author(s):  
Yuma Sasaki ◽  
Takahiro Orikasa ◽  
Nobutaka Nakamura ◽  
Kiyotada Hayashi ◽  
Yoshihito Yasaka ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Trade Off ◽  
Food Loss

scholarly journals Life Cycle Assessment of the Use of Phase Change Material in an Evacuated Solar Tube Collector

Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4146
Author(s):  
Agnieszka Jachura ◽  
Robert Sekret
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Phase Change ◽  
Phase Change Material ◽  
Solar Collector ◽  
Hot Water ◽  
Production Operation ◽  
Management Scenarios ◽  
Change Material

This paper presents an environmental impact assessment of the entire cycle of existence of the tube-vacuum solar collector prototype. The innovativeness of the solution involved using a phase change material as a heat-storing material, which was placed inside the collector’s tubes-vacuum. The PCM used in this study was paraffin. The system boundaries contained three phases: production, operation (use phase), and disposal. An ecological life cycle assessment was carried out using the SimaPro software. To compare the environmental impact of heat storage, the amount of heat generated for 15 years, starting from the beginning of a solar installation for preparing domestic hot water for a single-family residential building, was considered the functional unit. Assuming comparable production methods for individual elements of the ETC and waste management scenarios, the reduction in harmful effects on the environment by introducing a PCM that stores heat inside the ETC ranges from 17 to 24%. The performed analyses have also shown that the method itself of manufacturing the materials used for the construction of the solar collector and the choice of the scenario of the disposal of waste during decommissioning the solar collector all play an important role in its environmental assessment. With an increase in the application of the advanced technologies of materials manufacturing and an increase in the amount of waste subjected to recycling, the degree of the solar collector’s environmental impact decreased by 82% compared to its standard manufacture and disposal.

scholarly journals Environmental impacts of wooden, plastic, and wood-polymer composite pallet: a life cycle assessment approach

2021 ◽  
Author(s):  
Md.Musharof Hussain Khan ◽  
Ivan Deviatkin ◽  
Jouni Havukainen ◽  
Mika Horttanainen
Keyword(s):  
Sensitivity Analysis ◽  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Polymer Composite ◽  
Global Warming Potential ◽  
Consequential Life Cycle Assessment ◽  
Wood Polymer ◽  
Biogenic Carbon ◽  
Wood Polymer Composite

Abstract Purpose Waste recycling is one of the essential tools for the European Union’s transition towards a circular economy. One of the possibilities for recycling wood and plastic waste is to utilise it to produce composite product. This study analyses the environmental impacts of producing composite pallets made of wood and plastic waste from construction and demolition activities in Finland. It also compares these impacts with conventional wooden and plastic pallets made of virgin materials. Methods Two different life cycle assessment methods were used: attributional life cycle assessment and consequential life cycle assessment. In both of the life cycle assessment studies, 1000 trips were considered as the functional unit. Furthermore, end-of-life allocation formula such as 0:100 with a credit system had been used in this study. This study also used sensitivity analysis and normalisation calculation to determine the best performing pallet. Result and discussion In the attributional cradle-to-grave life cycle assessment, wood-polymer composite pallets had the lowest environmental impact in abiotic depletion potential (fossil), acidification potential, eutrophication potential, global warming potential (including biogenic carbon), global warming potential (including biogenic carbon) with indirect land-use change, and ozone depletion potential. In contrast, wooden pallets showed the lowest impact on global warming potential (excluding biogenic carbon). In the consequential life cycle assessment, wood-polymer composite pallets showed the best environmental impact in all impact categories. In both attributional and consequential life cycle assessments, plastic pallet had the maximum impact. The sensitivity analysis and normalisation calculation showed that wood-polymer composite pallets can be a better choice over plastic and wooden pallet. Conclusions The overall results of the pallets depends on the methodological approach of the LCA. However, it can be concluded that the wood-polymer composite pallet can be a better choice over the plastic pallet and, in most cases, over the wooden pallet. This study will be of use to the pallet industry and relevant stakeholders.

scholarly journals Attributional & Consequential Life Cycle Assessment: Definitions, Conceptual Characteristics and Modelling Restrictions

2021 ◽  
Vol 13 (13) ◽  
pp. 7386
Author(s):  
Thomas Schaubroeck ◽  
Simon Schaubroeck ◽  
Reinout Heijungs ◽  
Alessandra Zamagni ◽  
Miguel Brandão ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Product Life Cycle ◽  
Sustainability Assessment ◽  
Consequential Life Cycle Assessment ◽  
Modelling Framework ◽  
Potential Environmental Impact ◽  
Reference Environment ◽  
The Impact

To assess the potential environmental impact of human/industrial systems, life cycle assessment (LCA) is a very common method. There are two prominent types of LCA, namely attributional (ALCA) and consequential (CLCA). A lot of literature covers these approaches, but a general consensus on what they represent and an overview of all their differences seems lacking, nor has every prominent feature been fully explored. The two main objectives of this article are: (1) to argue for and select definitions for each concept and (2) specify all conceptual characteristics (including translation into modelling restrictions), re-evaluating and going beyond findings in the state of the art. For the first objective, mainly because the validity of interpretation of a term is also a matter of consensus, we argue the selection of definitions present in the 2011 UNEP-SETAC report. ALCA attributes a share of the potential environmental impact of the world to a product life cycle, while CLCA assesses the environmental consequences of a decision (e.g., increase of product demand). Regarding the second objective, the product system in ALCA constitutes all processes that are linked by physical, energy flows or services. Because of the requirement of additivity for ALCA, a double-counting check needs to be executed, modelling is restricted (e.g., guaranteed through linearity) and partitioning of multifunctional processes is systematically needed (for evaluation per single product). The latter matters also hold in a similar manner for the impact assessment, which is commonly overlooked. CLCA, is completely consequential and there is no limitation regarding what a modelling framework should entail, with the coverage of co-products through substitution being just one approach and not the only one (e.g., additional consumption is possible). Both ALCA and CLCA can be considered over any time span (past, present & future) and either using a reference environment or different scenarios. Furthermore, both ALCA and CLCA could be specific for average or marginal (small) products or decisions, and further datasets. These findings also hold for life cycle sustainability assessment.

Sign in / Sign up

Export Citation Format

Share Document