Preliminary Investigation of Microplastics in Sediments from Industrial Manufacturing Waste Sources

Microplastics (particles with a size of less than 5 mm) are a rising environmental problem. Microplastics can disseminate in the air and accumulate in sediments as well as in microorganisms and humans, due to their small size. Sediment is considered to be the major repository of microplastics, particularly those of the PE type. Microplastics in massive amounts accumulated in sediments, perhaps as a result of point sources or diffuse contamination. Microplastic contamination can spread from industrial production facilities, urban areas, agricultural areas, or the air. The current study was carried out to explore the occurrence of MPs in sediments at discharge sources by evaluating 27 sediment samples taken from 9 distinct waste sources from industrial activity locations to determine the amount of microplastic contamination in sediments at discharge sources. Microplastics with relatively high density were found in all sediment samples in this research, ranging from 2,900 to 238,200 particles/kg dw. The most prevalent microplastics detected in sediment samples at these sites were fibers and fragments, accounting for 59-94% and 6-41%, respectively. Fiber microplastics ranged in size from 1000 to 9,000 µm, whereas fragment microplastics ranged from 200,000 to 2,100,000 µm2. Microplastics with < 1000 µm and 1000-2000 µm sizes accounted for a significant portion of the total, reaching 21.05-37.84% and 39.74-61.17%, respectively. The hue of microplastic particles in sediment samples obtained was highly varied.

Quality Control of Different Types of Honey and Propolis Collected from Romanian Accredited Beekeepers and Consumer’s Risk Assessment

Honey is a natural product recognized and appreciated for its nutritional value and therapeutic potential. However, the quality of bee honey is essential because various contaminants can seriously affect consumers’ health. In the experimental part of the work, we analyzed different types of honey (linden, black locust, rapeseed and multifloral honey) and propolis, which were collected from Romanian accredited beekeepers who placed beehives in two areas characterized by different industrial activity: area 1 (A1) is an area with intense industrial activity, with other industries existing nearby, including a refinery, while area 2 (A2) is entirely devoid of industrial activity, but with moderate agricultural activity. A total of 144 samples were collected, twelve samples for each variety of honey, propolis and soil, corresponding to each area analyzed. In addition, seven heavy metals and three pesticides were tested for in the samples collected. Finally, the correlation between the degree of contamination with soil pollutants and the contamination of the bee products harvested from the analyzed areas was studied. Cadmium, lead, copper, zinc and the sum of DDT metabolites exceeded the maximum allowable levels in honey samples, with differences between different types of honey.

Spatial and temporal analysis of the risks posed by metal contamination in coastal and marine sediments of Bahrain

Nine metals including Al, Cd, Cr, Cu, Fe, Mn, Ni, Pb and Zn were analysed from sediment samples collected from 29 stations since 2007 from Bahraini waters. Within this study, it was investigated whether concentrations of these determinants are at concentrations above internationally established Assessment Criteria (AC). The majority of sites were considered not to pose a toxicological risk in terms of metal contamination. Where breaches occurred, they were mainly from historic samples related to Cr, Cu and Ni contamination. A trend assessment revealed that out of 59 significant trends, 36 were downwards and 23 upwards, indicating that some determinants like Al, Zn and Ni are improving strongly across some sites, whilst areas associated with industrial activity still see some increasing trends for Al, Cd, Pb and Zn.

Ecological and hygienic problems in the Arctic territories of intensive industrial activity (review)

The Goal. To analyze the literature on the impact of high latitude climate on human health, as well as consider some aspects of adaptation to Arctic conditions and nutritional issues for the population and shift workers.Methods. Review of the articles placed in the bibliographic and abstract databases of VINITI, CyberLeninka, RSCI, Scopus, WoS, on the study of environmental and hygienic problems in the Arctic territories, where intense industrial activity is carried out. The following keywords were used: Arctic territories, adaptation, watch, food.Results. Long-term fundamental research has established that a complex of unfavorable and extreme natural and climatic factors in the Arctic causes two main syndromes in humans – “polar tension” and “northern tissue hypoxia”. Adaptation of new settlers in the Arctic territories proceeds in three stages. The duration of the shift period must have a physiological and hygienic justification and correspond to the duration of the period of stable working capacity. In high latitudes, it is especially important to develop diets and food products for various groups of the population and shift workers in relation to the specifics of their work in the Arctic regionsConclusions. Among the main environmental and hygienic problems of the Arctic territories, where intense industrial activity is carried out, it is necessary to highlight the tasks of scientific substantiation of rational modes of work and rest of workers in rotational forms of work. Also it’s necessary to define the quantitative and qualitative composition of food rations recommended for nutrition of various groups of the population, in relation to the specifics of production factors.

Analysis of air pollution in Primorsky Krai in 2019-2020 according to GMAO/NASA satellite monitoring

The results of modeling variations in atmospheric pollutants over Primorsky Krai in 2019 and 2020 based on GMAO/NASA satellite monitoring data are analyzed. It is shown that average annual concentrations of pollutants in 2020 decreased as compared to 2019: by 20–35% for sulfur dioxide; by 5–20% for sulfates; by 8–20% for carbon monoxide; by 25–40 % for particulate matter PM (1, 2.5, and 10 μm). One of the reasons for the air pollution decline in Primorsky Krai in 2020 is the reduction of anthropogenic load in the context of a decrease in industrial activity and traffic flows both in Primorye and in the adjacent areas of China. Episodes of high pollution in 2019 were formed under influence of the transboundary transport of polluted air masses. Keywords: air pollution, aerosol and chemical elements, transboundary transport, satellite monitoring, Primorsky Krai

“Late Antique” Mining Community in the North Kharga Oasis (Egypt)

The North Kharga Oasis Darb Ain Amur Survey (NKODAAS) has been exploring the extreme northern area and western extension of Kharga Oasis in order to locate and document hitherto undiscovered and unrecorded archaeological sites and material. The archaeological sites identified during the course of the survey are varied, including rock art, routes, mines, quarries, water dumps, wells, shelters, hamlets, and settlements. The site presented here is a Roman/“Late Antique” complex, including a church and several related areas of settlement and industrial activity devoted to alum mining and sandstone quarrying, that played a role in the history of the economy and landscape of Kharga Oasis.

INNOVATIVE DEVELOPMENT OF INDUSTRY IN THE CONTEXT OF IMPLEMENTATION OF THE STATE REGIONAL POLICY GOALS

The article emphasizes that increasing of efficiency and competitiveness of Ukrainian industry can be achieved only by its transition to an innovative development way. The aim of the article is to analyze the indicators of innovation activity, invention and to develop proposals for the implementation of a number of measures in the context of the implementation of state regional policy to stimulate innovative development of industry. The article analyzes the indicators of innovation activity of Ukrainian industry in 2014-2019. The analysis of indicators of innovation activity of industrial enterprises, conducted in terms of technological levels of industrial development, shows the lack of stable trends in the dynamics of innovation activity. The general trend for all levels of produce-ability during the analyzed period is a decrease in the volume of sold innovative products. In general, the analysis of the main indicators of innovative activity of industry shows a decrease in the role of high-tech industries in the production and implementation of innovations. The existing potential of the regions in terms of inventions and utility models is analyzed. The analysis of the distribution of applications for inventions and utility models from national and foreign applicants-legal entities by type of industrial activity shows a decrease in inventive activity of enterprises in most types of industrial activity. The priority technical directions of patenting of inventions and utility models in the regions with the highest inventive activity are presented. It is emphasized that the low level of technological development of industry causes insignificant volumes of exports of high-tech products. The analysis shows a critically low level of high-tech exports in the regions of Ukraine, and somewhere its absence at all. It is claimed that the implementation of state regional policy in the regions of Ukraine is associated with the application of an integrated approach to the development and implementation of regional strategies. The use of an integrated approach will contribute to: improving the efficiency of the use of public funds aimed at the implementation of regional and local development projects, national, regional and sectorial programs, as well as programs for the development of problematic regions and the modernization of industry and infrastructure development in general. Under these conditions, the priorities of smart specialization of the regions are competitive advantages and guidelines for structural modernization of their economy.

Key Factors Influencing the Achievement of Climate Neutrality Targets in the Manufacturing Industry: LMDI Decomposition Analysis

The manufacturing industry is often caught in the sustainability dilemma between economic growth targets and climate action plans. In this study, a Log-Mean Divisia Index (LMDI) decomposition analysis is applied to investigate how the amount of industrial energy-related CO2 emissions in Latvia has changed in the period from 1995 to 2019. The change in aggregate energy-related CO2 emissions in manufacturing industries is measured by five different factors: the industrial activity effect, structural change effect, energy intensity effect, fuel mix effect, and emission intensity effect. The decomposition analysis results showed that while there has been significant improvement in energy efficiency and decarbonization measures in industry, in recent years, the impact of the improvements has been largely offset by increased industrial activity in energy-intensive sectors such as wood processing and non-metallic mineral production. The results show that energy efficiency measures in industry contribute most to reducing carbon emissions. In the future, additional policies are needed to accelerate the deployment of clean energy and energy efficiency technologies.

Overview of the Leather Industry and Pollution Impact

The growing awareness of the human and environmental vulnerability, to the pollution resulting from industrial activity, highlights the urgent need for control and mitigate the degradation of the world as we know it. The leather industry, considered as one of the industries with a significant environmental impact, applies several chemicals, some of them considered as hazardous chemicals, such as chromium, in leather production. The restricted EU environmental regulations have driven the search for a process that ensures regulatory compliance and a final product that fulfills society’s requirements. The present review describes alternative options, applied in the leather tanning process in the last five years, to overcome some of the industry barriers, without compromising the final characteristics of leather.