scholarly journals Environmental impacts of wooden, plastic, and wood-polymer composite pallet: a life cycle assessment approach

2021 ◽  
Author(s):  
Md.Musharof Hussain Khan ◽  
Ivan Deviatkin ◽  
Jouni Havukainen ◽  
Mika Horttanainen
Keyword(s):  
Sensitivity Analysis ◽  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Polymer Composite ◽  
Global Warming Potential ◽  
Consequential Life Cycle Assessment ◽  
Wood Polymer ◽  
Biogenic Carbon ◽  
Wood Polymer Composite

Abstract Purpose Waste recycling is one of the essential tools for the European Union’s transition towards a circular economy. One of the possibilities for recycling wood and plastic waste is to utilise it to produce composite product. This study analyses the environmental impacts of producing composite pallets made of wood and plastic waste from construction and demolition activities in Finland. It also compares these impacts with conventional wooden and plastic pallets made of virgin materials. Methods Two different life cycle assessment methods were used: attributional life cycle assessment and consequential life cycle assessment. In both of the life cycle assessment studies, 1000 trips were considered as the functional unit. Furthermore, end-of-life allocation formula such as 0:100 with a credit system had been used in this study. This study also used sensitivity analysis and normalisation calculation to determine the best performing pallet. Result and discussion In the attributional cradle-to-grave life cycle assessment, wood-polymer composite pallets had the lowest environmental impact in abiotic depletion potential (fossil), acidification potential, eutrophication potential, global warming potential (including biogenic carbon), global warming potential (including biogenic carbon) with indirect land-use change, and ozone depletion potential. In contrast, wooden pallets showed the lowest impact on global warming potential (excluding biogenic carbon). In the consequential life cycle assessment, wood-polymer composite pallets showed the best environmental impact in all impact categories. In both attributional and consequential life cycle assessments, plastic pallet had the maximum impact. The sensitivity analysis and normalisation calculation showed that wood-polymer composite pallets can be a better choice over plastic and wooden pallet. Conclusions The overall results of the pallets depends on the methodological approach of the LCA. However, it can be concluded that the wood-polymer composite pallet can be a better choice over the plastic pallet and, in most cases, over the wooden pallet. This study will be of use to the pallet industry and relevant stakeholders.

A life cycle assessment of a ‘minus carbon’ refugee house: global warming potential and sensitivity analysis

2020 ◽  
Vol 14 (3) ◽  
pp. 559-579
Author(s):  
Marwa Dabaieh ◽  
Nargessadat Emami ◽  
Jukka Taneli Heinonen ◽  
Björn Marteinsson
Keyword(s):  
Sensitivity Analysis ◽  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Middle East ◽  
Impact Assessment ◽  
Global Warming Potential ◽  
Raw Materials ◽  
Proof Of Concept ◽  
Content Type

PurposeOver the last eight years, the Middle East has experienced a series of high profile conflicts which have resulted in over 5.6 million Syrians forced to migrate to neighbouring countries within the MENA (Middle East and North Africa) region or to Europe. That have exerted huge pressure on hosting countries trying to accommodate refugees in decent shelters and in quick manner. Temporary shelters normally carry a high environmental burden due to their short lifespan, and the majority are fabricated from industrialised materials. This study assesses the carbon impact for a minus carbon experimental refugee house in Sweden using life cycle assessment (LCA) as tool. SimaPro and GaBi software were used for the calculations and the ReCiPe midpoint method for impact assessment. The results show that using local plant-based materials such as straw, reeds and wood, together with clay dug from close to the construction site, can drastically reduce the carbon footprint of temporary shelters and even attain a negative carbon impact of 226.2 kg CO2 eq/m2. Based on the results of the uncertainty importance analysis, the overall global warming potential impact without and with sequestration potential are mostly sensitive to the variability of the GWP impact of wood fibre insulation.Design/methodology/approachThe methodology is designed to calculate the GWP impact of the refugee house over its entire life cycle (production, operation and maintenance and end of life). Then, the sensitivity analysis was performed to explore the impact of input uncertainties (selection of material from the database and the method) on the total GWP impact of the refugee house with and without sequestration. The ISO standards (International Standard 14040 2006; International Standard 14044 2006) divide the LCA framework into four steps of Goal and scope, inventory analysis, impact assessment, and interpretation.FindingsThis study has shown an example for proof of concept for a low impact refugee house prototype using straw, reeds, clay, lime and wood as the principle raw materials for building construction. Using natural materials, especially plant-based fibres, as the main construction materials, proved to achieve a minus carbon outcome over the life cycle of the building. The GWP of the shelter house without and with sequestration are found to be 254.7 kg CO2 eq/m2 and -226.2 kg CO2 eq/m2, respectively.Originality/valueAs there are still very few studies concerned with the environmental impact of temporary refugee housing, this study contributes to the pool of knowledge by introducing a complete LCA calculation for a physical house prototype as a proof of concept on how using low impact raw materials for construction combined with passive solutions for heating and cooling can reach a minus carbon outcome. The GWP of the shelter house without and with sequestration are found to be 254.7 kg CO2 eq/m2 and -226.2 kg CO2 eq/m2.

scholarly journals Life Cycle Assessment Applications To The Dry Steam Geothermal Power Generation (Case Study: Star Energy Geothermal Wayang Windu, Ltd, Indonesia)

2019 ◽  
Author(s):  
Rina Annisa ◽  
Benno Rahardyan
Keyword(s):  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Power Plant ◽  
Environmental Impact ◽  
Global Warming Potential ◽  
Geothermal Power Plant ◽  
Continual Improvement ◽  
Acidification Potential ◽  
Geothermal Power

Geothermal potential in Indonesia estimate can produced renewable energy 29 GW, and until 2016 it still used 5% or about 1643 MW in. From that result, about 227 MW produced by Wayang Windu geothermal power plant. The Input were raw material, energy and water. These input produced electricity as main product, by product, and also other output that related to environment i.e. emission, solid waste and waste water. All environmental impacts should be controlled to comply with environmental standard, and even go beyond compliance and perform continual improvement.  This research will use Life Cycle Assessment method based on ISO 14040 and use cradle to gate concept with boundary from liquid steam production until electricity produced, and Megawatt Hours as the functional unit. Life Cycle Inventory has been done with direct input and output in the boundary and resulted that subsystem of Non Condensable Gas and condensate production have the largest environmental impact. LCI also show that every MWh electricity produced, it needed 6.87 Ton dry steam or 8.16 Ton liquid steam. Global Warming Potential (GWP) value is 0.155 Ton CO2eq./MWh, Acidification Potential (AP) 1.69 kg SO2eq./MWh, Eutrophication Potential (EP) 5.36 gPO4 eq./MWh and land use impacts 0.000024 PDF/m2. Life Cycle Impact Assessment resulted that AP contribute 78% of environmental impact and 98% resulted from H2S Non Condensable Gas. Comparison results with another dry steam geothermal power plant show that impact potential result of the company in good position and there’s a strong relation between gross production, GWP and AP value.Keywords: Life cycle assessment; Geothermal; Continual Improvement; Global Warming Potential; Acidification Potential

scholarly journals Global Warming Potential, Variable Costs, and Water Use of a Model Greenhouse Production System for 11.4-cm Annual Plants Using Life Cycle Assessment

HortScience ◽  
2018 ◽  
Vol 53 (4) ◽  
pp. 441-444 ◽  
Author(s):  
Dewayne L. Ingram ◽  
Charles R. Hall ◽  
Joshua Knight
Keyword(s):  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Best Management Practices ◽  
Global Warming Potential ◽  
Production System ◽  
Natural Ventilation ◽  
Management Practices ◽  
Individual Plant ◽  
Environmental Controls

Life cycle assessment (LCA) was used to analyze the global warming potential (GWP) and variable costs of production system components for an 11.4-cm container of wax begonia (Begonia ×semperflorens-cultorum Hort) modeled in a gutter-connected, Dutch-style greenhouse with natural ventilation in the northeastern United States. A life cycle inventory of the model system was developed based on grower interviews and published best management practices. In this model, the GWP of input products, equipment use, and environmental controls for an individual plant would be 0.140 kilograms of carbon dioxide equivalents (kg CO2e) and the variable costs would total $0.666. Fifty-seven percent of the GWP and 43% of the variable costs would be due to the container and the portion of a 12-plant shuttle tray assigned to a plant. Electricity for irrigation and general overhead would be only 13% of GWP and 2% of variable costs. Natural gas use for heating would be 0.01% of GWP and less of the variable costs, even at a northeastern U.S. location. This was because of the rapid crop turnover and only heated for 3 months of a 50-week production year. Life cycle GWP contributions through carbon sequestration of flowering annuals after being transplanted in the landscape would be minor compared with woody plants; however, others have documented numerous benefits that enhance the human environment.

scholarly journals Comparative Life Cycle Assessment of Steel and Concrete Construction Frames: A Case Study of Two Residential Buildings in Iran

Buildings ◽  
2020 ◽  
Vol 10 (3) ◽  
pp. 54
Author(s):  
Amir Oladazimi ◽  
Saeed Mansour ◽  
Seyed Abbas Hosseinijou
Keyword(s):  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Global Warming Potential ◽  
Residential Buildings ◽  
Steel Frame ◽  
Complete Analysis ◽  
Environmental Damage ◽  
Concrete Frame

Given the fact that during the recent years the majority of buildings in Iran have been constructed either on steel or concrete frames, it is essential to investigate the environmental impacts of materials used in such constructions. For this purpose, two multi-story residential buildings in Tehran with a similar function have been considered in this study. One building was constructed with a steel frame and the other was constructed with a concrete frame. Using the life cycle assessment tool, a complete analysis of all the stages of a building’s life cycle from raw material acquisition to demolition and recycling of wastes was carried out. In this research, the environmental impacts included global warming potential in 100 years, acidification, eutrophication potential, human toxicity (cancer and non-cancer effects), resource depletion (water and mineral), climate change, fossil fuel consumption, air acidification and biotoxicity. It could be concluded from the results that the total pollution of the concrete frame in all eleven aforementioned impact factors was almost 219,000 tonnes higher than that of the steel frame. Moreover, based on the results, the concrete frame had poorer performance in all but one impact factor. With respect to global warming potential, the findings indicated there were two types of organic and non-organic gases that had an impact on global warming. Among non-organic emissions, CO2 had the biggest contribution to global warming potential, while among organic emissions, methane was the top contributor. These findings suggest the use of steel frames in the building industry in Iran to prevent further environmental damage; however, in the future, more research studies in this area are needed to completely investigate all aspects of decision on the choice of building frames, including economic and social aspects.

Assessing management options for wastewater treatment works in the context of life cycle assessment

1998 ◽  
Vol 38 (11) ◽  
pp. 23-30 ◽  
Author(s):  
F. J. Dennison ◽  
A. Azapagic ◽  
R. Clift ◽  
J. S. Colbourne
Keyword(s):  
Wastewater Treatment ◽  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Global Warming Potential ◽  
Water Utilities ◽  
Management Options ◽  
Management Regimes ◽  
Treatment And Disposal ◽  
The Uk

This paper presents the preliminary results of a Life Cycle Assessment (LCA) study comparing different wastewater treatment works, operated by Thames Water Utilities Ltd. in the UK. Fifteen works have been studied, representing a range of size and type of treatment works. Five management regimes for centralising sludge treatment and disposal were analyzed in the context of LCA to provide guidance on choosing the best practicable environmental option (BPEO). Consideration of Global warming potential indicates that the four proposed management regimes with centralisation of sludge for treatment and disposal, as adopted by Thames Water Utilities Ltd., is an environmental improvement upon the current practice. One of these options, that of complete centralisation and composting of sludge prior to disposal, exerts the least environmental impact with respect to Global warming potential. This suggests that the adoption of composting at Crawley is environmentally preferable to increasing the digestion facility at this works.

scholarly journals Environmental Impacts Evaluation of Sorbitol Production from Glucose

Eksergi ◽  
2019 ◽  
Vol 16 (1) ◽  
pp. 7 ◽  
Author(s):  
Rifkah Akmalina
Keyword(s):  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Global Warming Potential ◽  
Energy Demand ◽  
Electricity Consumption ◽  
Sustainable Improvement ◽  
Photochemical Oxidants ◽  
Main Consumer

A life cycle assessment (LCA) has been performed on sorbitol production from glucose, which aims to quantify and evaluate the environmental impacts that produced from the process. SuperPro Designer software was employed to perform the process simulation, while SimaPro was used to quantify the LCA.Potency of global warming, acidification, eutrophication, photochemical oxidants creation, abiotic depletion, and ozone layer depletion were evaluated. A gate-to-gate LCA study of sorbitol production showed that global warming potential (GWP) had the largest impact to environment with the value of 3.551 kg CO2 eq/kg sorbitol. Glucose and electricity consumption were known as two major contributors to GWP, and hydrogen reactor was the main consumer of electricity. The use of glucose were responsible for more than 50% of total environmentalimpact in each category. Performing heat integration in sorbitol processing is highly recommended for gate-togate system to reduce energy demand, thus decreasing the environmental impacts. Therefore, this LCA study may be applied to perform a sustainable improvement on sorbitol production process.Keywords: sorbitol; life cycle assessment; global warming potential

scholarly journals Disposable Medical Masks: Environmental Costs

2021 ◽  
Author(s):  
BURÇİN ATILGAN TÜRKMEN
Keyword(s):  
New York ◽  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Environmental Impacts ◽  
Global Warming Potential ◽  
Functional Unit ◽  
Environmental Costs ◽  
Inventory Data

Abstract A massive increase in the use and production of masks worldwide has been seen in the current COVID-19 pandemic, which has contributed to reducing the transmission of the virus globally. This paper aims to evaluate the environmental impacts of disposable medical masks using the Life Cycle Assessment (LCA) method, first for the selected functional unit related to the manufacturing of one disposable medical mask and then for the global manufacturing of this type of mask in 2020. The inventory data was constructed directly from the industry. The system boundaries include the fabric, nose wire, and ear loops parts, transportation of materials, body making, ultrasonic vending, and packaging steps. The results suggest that the global warming potential of a disposable medical mask is 0.02 g CO2-Eq. for which the main contributor is the packaging step (44%) followed by the life cycle of fabric (27%), and nose wire (14%) parts. In total, 52 billion disposable medical masks used worldwide consumes 25 TJ of energy in 2020. The global warming potential of disposable medical masks supplied in a year of the COVID-19 pandemic is 1.1 Mt CO2 eq., equivalent to around 1.3 billion return flights from Istanbul to New York. This paper assessed the hotspots in the medical mask, allowing for a significant reduction in the environmental impact of mask use. This can be used as a roadmap for future mask designs.

scholarly journals Life Cycle Assessment (LCA) Pengelolaan Sampah di TPA Gunung Panggung Kabupaten Tuban, Jawa Timur

2021 ◽  
Vol 22 (2) ◽  
pp. 147-161
Author(s):  
Rahmah Arfiyah Ula ◽  
Agus Prasetya ◽  
Iman Haryanto
Keyword(s):  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Anaerobic Digestion ◽  
Environmental Impact ◽  
Waste Management ◽  
Global Warming Potential ◽  
Waste Treatment ◽  
Acidification Potential ◽  
Alternative Scenarios

ABSTRACT The primary municipal waste treatment in Tuban Regency, East Java, was landfilling, besides the small amount of the waste was turned to compost. Landfilling causes global warming, which leads to climate change due to CH4 emission. This environmental impact could be worst by the population growth that increases the amount of waste. This study aimed to evaluate the environmental impact on waste management in the Gunung Panggung landfill in Tuban Regency and its alternative scenarios using Life Cycle Assessment (LCA). Four scenarios were used in this study. They are one existing scenario and three alternative scenarios comprising landfilling, composting, and anaerobic digestion. The scope of this study includes waste transportation to waste treatment which is landfilling, composting, and anaerobic digestion (AD). The functional unit of this analysis is per ton per year of treated waste. Environmental impacts selected are global warming potential, acidification potential, and eutrophication potential. The existing waste management in Gunung Panggung landfill showed the higher global warming potential because of the emission of CO2 and cost for human health, which is 6.379.506,17 CO2 eq/year and 5,92 DALY, respectively. Scenario 3 (landfilling, composting, and AD; waste sortation 70%) showed a lower environmental impact than others, but improvements were still needed. Covering compost pile or controlling compost turning frequency was proposed for scenario 3 amendment. Keywords: environmental impact, landfill, life cycle assessment, waste management   ABSTRAK Landfill merupakan pengelolaan sampah utama di tempat pemrosesan akhir (TPA) Gunung Panggung Kabupaten Tuban. Selain landfill, pengomposan diterapkan untuk mengolah sebagian kecil sampahnya. Landfill menghasilkan gas metana yang menyebabkan pemanasan global dan memicu perubahan iklim. Pertambahan penduduk memperbanyak sampah yang perlu diolah di TPA dan dapat memperparah dampak lingkungan yang ditimbulkan. Tujuan penelitian ini adalah menilai dampak lingkungan dari pengelolaan sampah eksisting di TPA Gunung Panggung Kabupaten Tuban Jawa Timur beserta skenario alternatifnya menggunakan Life Cycle Assessment (LCA). Terdapat satu skenario eksisting dan tiga skenario alternatif pengelolaan sampah yaitu landfilling, pengomposan, dan fermentasi anaerob (anaerobic digestion). Ruang lingkup studi meliputi pengangkutan sampah, pengelolaan sampah dengan cara pengomposan, Anaerobic Digestion (AD), dan landfill. Satuan fungsional yang digunakan yakni ton sampah yang diolah per tahun. Dampak lingkungan yang dipelajari di antaranya: pemanasan global, asidifikasi, dan eutrofikasi. Dampak lingkungan skenario eksisting menunjukkan nilai tertinggi terutama pada pemanasan global (6.379.506,17 CO2eq/tahun) dan kerugian pada kesehatan manusia (5,92 DALY). Skenario alternatif 3, yang meliputi pengelolaan secara landfill, pengomposan, dan AD menunjukkan dampak lingkungan yang kecil, namun memerlukan perbaikan. Perbaikan untuk skenario 3 yaitu dengan menambahkan penutup pada tumpukan kompos atau mengontrol frekuensi pembalikan kompos untuk mengurangi emisi NH3. Kata kunci: dampak lingkungan, life cycle assessment, pengelolaan sampah, tempat pemrosesan akhir

Sign in / Sign up

Export Citation Format

Share Document