Functional and pasting properties of wheat/tigernut pomace flour blends and sensory attributes of wheat/tigernut pomace flour meat pie

This study investigated the functional and pasting properties of wheat and tigernut pomace flour blends, as well as the sensory attributes of the meat pie obtained from the composite flour. Tigernut pomace flour was substituted for wheat flour in the amount of 2 –10%. Unsubstituted wheat flour served as the control. The composite blends were analysed for functional and pasting properties. The sensory attributes of the meat pie obtained from the composite flour were also determined. Bulk density, water absorption capacity, swelling power, and the solubility index of the blends ranged from 0.70 -0.75 g/mL, 0.62 -0.96%, 4.06 -4.47 g/g, and 2.45 -13.7% respectively. Peak, trough, breakdown, final, and setback viscosities, peak time, and pasting temperature ranged from 113.6 -135.9 RVU, 76.7 -90.2 RVU, 36.0 -45.8 RVU, 170 -183.7 RVU, 91.0 -93.6 RVU, 5.07 -6.03 min, and 88.4 -90.0 RVU respectively. In terms of appearance, the meat pie samples prepared from tigernut-substituted flour blends did not show significant difference (p < 0.05) from the control sample. The control sample had the highest overall acceptability, although samples from the composite blends were also found to be acceptable. Hence, tigernut pomace flour could be substituted for wheat at the amount of 10% to produce an acceptable meat pie.

Download Full-text

The Evaluation of Pasting Properties of Whole Wheat and Whole Green Plantain Flour Blends and Quality Characteristics of Crackers Made from the Blends

European Journal of Agriculture and Food Sciences ◽

10.24018/ejfood.2020.2.5.111 ◽

2020 ◽

Vol 2 (5) ◽

Author(s):

U. E. Inyang ◽

V. P. Elijah

Keyword(s):

Wheat Flour ◽

Nutritive Value ◽

Control Sample ◽

Pasting Properties ◽

Crude Fibre ◽

Whole Wheat Flour ◽

Overall Acceptability ◽

Substitution Level ◽

Whole Wheat ◽

Flour Blends

The demand for food products with functional attributes is on the increase worldwide. The present study was aimed at evaluating the effect of supplementing whole wheat flour with 0, 10, 20, 30, 40 and 50% whole green plantain flour on pasting properties of the flour blends, proximate composition, minerals and sensory characteristics of crackers made from the blends. The 100% whole wheat flour served as the control sample. The result showed that the peak viscosity (PV), trough viscosity (TV), breakdown viscosity (BDV), final viscosity (FV) and setback viscosity (SBV) were significantly affected by the level of plantain flour substitution. The 20% plantain flour substitution level recorded the minimum PV (264.00RVU), TV (248.00RVU), FV (531.00RVU) and SBV (263.00RVU) while the 50% plantain flour substituted blend recorded the highest PV (362.00RVU), TV (328.00RVU) and FV (603.00RVU). The control sample recorded the highest SBV (312.00RVU) and least BDV (3.00RVU). The peak times for all the blended samples were the same (7 min) while the time for the control sample was 5 min. There was insignificant difference (P>0.05) in the pasting temperature which ranged from 91.30 – 92.80oC. The crude protein, fat and calcium contents progressively decreased while the ash, crude fibre, carbohydrate, K, Mg, Fe and Zn contents in the prepared crackers progressively increased with increase in the proportion of plantain flour substitution. Cracker prepared from the blend of 80% whole wheat and 20% whole green plantain flours was the most preferred by the sensory evaluation panellists in terms of taste, texture and overall acceptability. It is evident from the study that acceptable crackers of enhanced nutritive value could be produced from blend of 80% whole wheat and 20% whole green plantain flours. The use of flour from unpeeled plantain as ingredient in cracker production would eliminate waste generation and its associated environmental problems.

Download Full-text

Effects of Fermented Maize Residue Addition on the Physico-chemical and Sensory Properties of Chin-Chin

Asian Food Science Journal ◽

10.9734/afsj/2021/v20i1130377 ◽

2021 ◽

pp. 65-73

Author(s):

Owuno Friday ◽

Achinewu Simeon Chituru

Keyword(s):

Proximate Composition ◽

Protein Digestibility ◽

Pasting Properties ◽

Absorption Capacity ◽

Composite Flour ◽

Crude Fibre ◽

Overall Acceptability ◽

Physico Chemical ◽

Significant Difference ◽

Pasting Temperature

Chin-Chin, a traditional Nigerian snack was prepared utilizing wheat-fermented maize residue composite flour at 0 – 30% replacement levels. Effects of this addition on the functional and pasting properties of the flour composite was evaluated. The snack produced was also evaluated for its sensory attributes, proximate composition and invitro-protein digestibility (IVPD). Functional properties results showed an increase in water absorption capacity (WAC), a decrease in oil absorption capacity (OAC), decrease in Bulk Density (BD), swelling power and solubility index with residue addition. Pasting property results showed a drop in the value of peak, trough, breakdown and final viscosity with substitution while set back viscosity increased.Peak temperature decreased, but values for pasting temperature showed no significant difference between the control and the blends. Results for sensory evaluation showed equal preference for overall acceptability. Proximate composition results showed residue addition led to an increase in crude fibre and protein content with a drop in the carbohydrate value. Residue addition did not increase protein digestibility. Addition of fermented maize residue in chin-chin production can be another way of utilizing the fibre rich by-product of the production of fermented maize starch.

Download Full-text

Quality Characteristics of Biscuits Produced from Composite Flour of Sweet Potato and Cashew Nut Flour Blends

Asian Food Science Journal ◽

10.9734/afsj/2020/v14i330130 ◽

2020 ◽

pp. 11-22

Author(s):

O. O. Tanko ◽

T. O. Hussaina ◽

N. S. Donaldben

Keyword(s):

Sweet Potato ◽

Absorption Capacity ◽

Composite Flour ◽

Crude Fibre ◽

Overall Acceptability ◽

Spread Ratio ◽

Cashew Nut ◽

Significant Difference ◽

Swelling Capacity ◽

Flour Blends

The research is aimed at adding value to sweet potato based biscuits using underutilized crops such as cashew nuts. The objective of the study was to add value to sweet potato based biscuits, the sweet potato was processed into flour; while the cashew nuts was unroasted cashew nuts were sorted to remove the stones, dirt’s and unwholesome cashew nuts, roasted, shelled, dried, peeled and processed into flour and sieved. The cashew nuts flour was substituted at 20, 30, 40 and 50% into sweet potato flour to produce sweet potato and cashew nuts composite flour were used for the production of biscuits. Functional, proximate composition of the biscuits, physical and sensory properties of composite biscuits were determined. Significance difference (P<0.05) was observed Bulk density, water absorption capacity, oil absorption capacity, swelling capacity, emulsion activity, foaming stability and gelatinization temperature increased from 0.62 to 0.73 g/cm3, 1.31 to 1.81 g/g, 2.10 to 2.22 g/g, 6.42 to 7.18 ml, 59.71 to 60.51%, 6.19 to 6.43% and 68.20 to 72.10ºC, respectively with an increase in the addition of cashew nuts flour. The crude protein, crude fat, crude fibre and ash increase from 14.65 to 18.31%, 7.88 to 10.21%, 3.21 to 3.51% and 4.10 to 4.76% respectively; while the moisture and carbohydrate content of the biscuits decreased from 13.77 to 13.31% and 56.39 to 49.89%, respectively with increase in the addition of the cashew nuts flour. The physical properties of the composite biscuits such as the weight, thickness, diameter and spread ratio ranged from 16.09 to 17.45 g, 10.87 to 10.96 mm, 38.94 to 40.02 mm and 3.56 to 3.60 respectively. The average means scores for the appearance, crispness, taste, aroma and overall acceptability increase were observed. There was a significant difference (p<0.05) in the appearance, taste and aroma while there was no significant difference (p>0.05) in the crispness and overall acceptability.

Download Full-text

Effect of Acha and Sprouted Soybeans Flour on the Quality of Wheat Based Cookies

Asian Food Science Journal ◽

10.9734/afsj/2019/v7i229969 ◽

2019 ◽

pp. 1-12

Author(s):

M. O. Eke ◽

D. Ahure ◽

N. S. Donaldben

Keyword(s):

Physical Properties ◽

Functional Properties ◽

Control Sample ◽

Absorption Capacity ◽

Crude Fibre ◽

Overall Acceptability ◽

Spread Ratio ◽

Significant Difference ◽

Triticum Spp ◽

Flour Blends

Cookies was produced from wheat (Triticum, spp), acha (Digitaria exilis), and sprouted soybeans (Glycine max) flour blends. The acha and soybeans were processed into flour and used to substitute wheat flour at different proportions with 100:0:0 wheat, acha and sprouted soybeans flour (WAS) as the control, 60:30:10, 50:40:10, 45:45:10, 40:50:10 and 35:55:10 (WAS). The functional properties of the wheat, acha and sprouted soybeans flour blends, physical properties and proximate compositions of the cookies were determined. The functional properties of the flour samples shows that the bulk density, wettability, water absorption capacity, oil absorption capacity and gelatinization temperature ranged from 0.63 g/ml-0.99 g/ml, 10.21-12.98 g/sec, 6.53-12.52 g/g, 0.52-0.66 g/g and 63.7-65.1ºC respectively. There were significant differences (p<0.05) in all the values. The proximate composition of cookies sample showed that crude protein, crude fat, crude fibre, ash, moisture and carbohydrate content ranged from 12.14-16.48 %, 2.10-3.74 %, 1.76-2.55 %, 2.75-8.55 %, 9.18-9.50 % and 59.37-72.06 % respectively. The physical properties of cookies showed that the weight, diameter, thickness and spread ratio ranged from 15.61-17.11g; 61.59-63.20mm; 9.88-11.99mm and 5.28-6.24 respectively. The control sample cookies from 100:0:0 (WAS), wheat, acha and sprouted soybeans flour blends sample had the highest sensory scores in terms of the taste, appearance, texture, aroma and overall acceptability. There was significant difference (p<0.05) in the colour, texture and aroma but there was no significant difference (p>0.05) in the taste and overall acceptability in 60:30:10, 50:40:10, 45:45:10, 40:50:10 and 35:55:10 (WAS) samples.

Download Full-text

Chemical, Pasting and Sensory Characteristics of Ukpo oka - A Steamed Maize Pudding Formulated From Maize and African Yam Bean Flour

Asian Journal of Dairy and Food Research ◽

10.18805/ajdfr.dr-144 ◽

2020 ◽

Vol 39 (01) ◽

Author(s):

Anosike Francis Chidi ◽

Nwagu Kingsley Ekene ◽

Ekwu Francis ◽

Nweke Friday Nwalo ◽

Nwoba Sunday Theophilus ◽

...

Keyword(s):

Functional Properties ◽

Pasting Properties ◽

Sensory Attributes ◽

Absorption Capacity ◽

Peak Time ◽

African Yam Bean ◽

Bean Flour ◽

Emulsion Capacity ◽

Yam Flour ◽

Flour Blends

Studies were conducted on the chemical, functional, pasting properties of the flour blends and sensory properties of ukpo oka formulated from of maize- African yam bean flour (AYBF) in order to improve the nutritional content of maize and encourage a wider utilization of the legume AYB. Supplementation of maize and African yam flour was done at 100:0, 50:50, 80:20, 60:40 and 20:80 maize: African yam bean flour, respectively. Proximate composition, functional properties, pasting properties of the flour blends was determined and sensory attributes of the products were also evaluated. The result showed that supplementation of maize with African yam bean flour significantly increased the protein, ash and fiber content of the flour blends with values ranging from 3.91 - 11.08%, 2.90 - 6.60%, 0.67 - 1.82% for protein, ash and fiber contents respectively. The protein, ash and fiber contents increased with addition of African yam bean flour while carbohydrate content of maize- African yam bean blends decreased with increase in the level of African yam bean. The values for functional properties ranged from 0.72 – 0.82g/ml, 99.33 – 323.33%, 9.01 – 19.65%, 690.00 - 978.33%, 0.67 – 1.13%, 0.484 – 1.038% for bulk density, foaming capacity, emulsion capacity, swelling capacity, water absorption capacity and oil absorption capacity respectively. Values for pasting properties of the flour blends expressed in rapid visco unit (RVU) ranges from 129.25 – 209.40, 22.55 – 67.93, 60.21 – 124.62 , 145.25 – 247.67 , 83.37 – 84.56 , 5.47 – 5.97 and 87.19 – 141.35 for peak viscosity, break down viscosity, set back viscosity, final viscosity, pasting temperature, peak time and trough respectively. Set back viscosity and final viscosity increased with increase in the levels of African yam bean while break down viscosity decrease with the increase in the levels of African yam bean. The products were highly rated in all sensory attributes evaluated however aroma decreases with increase in the levels of AYBF. Product made from flour blend 50:50 was the most preferred in terms of general acceptability.

Download Full-text

QUALITY ATTRIBUTES OF PANCAKES FROM PEELED AND UNPEELED SWEETPOTATO FLOURS WITH CASSAVA STARCH

Journal of Natural Sciences Engineering and Technology ◽

10.51406/jnset.v18i1.2034 ◽

2020 ◽

Vol 18 (1) ◽

pp. 88-102

Author(s):

A. T. OMIDIRAN ◽

O. A. ADERIBIGBE ◽

O. P. SOBUKOLA ◽

O. O. AKINBULE

Keyword(s):

Functional Properties ◽

Proximate Composition ◽

Control Sample ◽

Quality Attributes ◽

Cassava Starch ◽

Absorption Capacity ◽

Composite Flour ◽

Crude Fibre ◽

Overall Acceptability ◽

Flour Blends

This study evaluated some quality attributes of pancakes from peeled and unpeeled sweetpotato flours and cassava starch. Cassava starch was substituted up to 30% of the total composite flour. The proximate composition, colour, carotenoid and functional properties of the different flour blends were determined. The flour blends were processed into pancakes and the proximate composition and sensory acceptability of the pancakes were determined. Data obtained were subjected to analysis of variance. The result showed that they were significant differences (p<0.05) in the functional properties of the flour blends. Bulk density, Water absorption capacity, Oil absorption capacity, swelling capacity ranged from 0.70 to 0.78 g/ml, 1.87 to 2.30 g/ml, 1.02 to 1.40 g/ml and 5.18% to 6.66% respectively. There were significant differences (p<0.05) in the proximate composition of the pancake samples. The values ranged from 42.76 to 45.53%, 2.13 to 3.98%, 9.06 to 10.34%, 5.01 to 7.18%, 3.75 to 6.01% and 29.19 to 35.33% for moisture, ash, fat, protein, crude fibre and carbohydrate contents, respectively. Pancake produced from 100:0 peeled and unpeeled sweetpotato flour had the highest score for overall acceptability which can compare favorably, with pancakes from wheat flour which is the control sample. In conclusion, sweetpotato flour blended with cassava starch at different ratio gave good proximate and functional properties which resulted in pancakes of good quality attributes.

Download Full-text

Proximate composition, pasting and functional properties of composite flour blends from cassava and chia seeds flour

Food Science and Technology International ◽

10.1177/10820132211069471 ◽

2021 ◽

pp. 108201322110694

Author(s):

Ashura Katunzi-Kilewela ◽

Leonard MP Rweyemamu ◽

Lilian D Kaale ◽

Oscar Kibazohi ◽

Roman M Fortunatus

Keyword(s):

Functional Properties ◽

Proximate Composition ◽

Pasting Properties ◽

Absorption Capacity ◽

Composite Flour ◽

Peak Time ◽

Swelling Capacity ◽

Pasting Temperature ◽

Gelation Concentration ◽

Flour Blends

The study established the proximate composition, pasting, and functional properties of cassava flour (CF) blended with chia seeds flour (CSF). Composite flour was prepared by blending CF with CSF in the ratios of 95:05, 90:10, 85:15, 80:20, and 75:25 with CF and CSF used as controls, respectively. The effect of blending significantly (p < 0.05) increased protein, fat, fibre, and ash contents as CSF increased. On other hand, moisture and carbohydrate contents decreased significantly. Pasting properties of composite flour blends decreased significantly (p < 0.05) as the incorporation of CSF increased and a noticeable change was observed for composite flour (75:25) except for peak time and pasting temperature. Functional properties of water absorption capacity (WAC) of CSF were significantly different with CF and composite flour blends. Oil absorption capacity (OAC) of CF and CSF were significantly different, while the composite flour blends had varied OAC due to the inclusion of the different amounts of CSF. The swelling capacity (SC) of CF and CSF were not significantly different, but composite flour blends were significantly different from both CSF and CF. The least gelation concentration (LGC) and bulk density (BD) increased significantly as chia seeds increased. Increased concentration of chia CSF in the composite flour blends showed to alter the functional properties. This study recommends composite flour 75:25 for processing semiliquid products like porridge due to reduced pasting properties values that may be associated with increased energy density compared to CF.

Download Full-text

The evaluation of nutritional composition and functional and pasting properties of wheat flour-coconut flour blends

Croatian Journal of Food Science and Technology ◽

10.17508/cjfst.2019.11.1.03 ◽

2019 ◽

Vol 11 (1) ◽

pp. 21-29 ◽

Cited By ~ 1

Author(s):

Folasade Maria Makinde ◽

Ayobami Opeyemi Eyitayo

Keyword(s):

Bulk Density ◽

Wheat Flour ◽

Cocos Nucifera ◽

Proximate Analysis ◽

Pasting Properties ◽

Nutritional Composition ◽

Absorption Capacity ◽

Composite Flour ◽

Iron And Zinc ◽

Flour Blends

The feasibility of partially replacing wheat flour with coconut flour in baked products was investigated. Matured coconut (Cocos nucifera) endocarp was grated for the extraction of milk, dried, milled,and pulverized. Five blends of composite flour were prepared by combining wheat flour with 10% to 50% of partially defatted coconut flour,respectively. The 100% wheat flour served as control. The samples were analysed for proximate, mineral, functional,and pasting properties using standard procedures. The proximate analysis indicated 5.52 % moisture, 23.6% protein, 11.14% fibre, 5.4% fat, 5.21% ash,and 49.1% carbohydrate for coconut flour. The ranges of the proximate composition forthe flour blends were:moisture (4.79-5.55%), protein (14.9 -19.1%), fibre (0.44 -5.12%), fat (2.9 -5.3%), ash (0.68-2.13%), carbohydrate (62.7-76.2%),and energy (315.26-335.28 kCal). The values for moisture, protein, fat, fibre,and ash increased with the increasing levels of coconut substitution,except for carbohydrate and energy contents. There were significant differences (p≤0.05) in calcium, magnesium, potassium, phosphorus, iron,and zinc concentrations of the samples. The range of values obtained for these parameters was1.32-2.59 mg/kg, 2.60-3.83 mg/kg, 12.10-16.89 mg/kg, 12.40-18.50 mg/kg,0.50-1.22 mg/kg and 0.30-1.23 mg/kg, respectively. The ranges of functional properties were:loosed bulk density (0.28-0.49 g/mL),packed bulk density (0.44-0.75 g/mL), pH (5.77-6.57), swelling capacity (3.89-6.56%), water absorption capacity (0.89-3.97 ml/g),oil absorption capacity (1.26-3.20 ml/g),and gelation (12.0-18.0%). The pasting characteristics showed significant differences betweenthe100% wheat flour and coconut substituted samples. The results revealed modifications in nutritional, functional,and pasting properties in blends containing fractions of partially defatted coconut flour,which suggeststheir application in diverse food products.

Download Full-text

Functional Properties of Sausage Rolls Made from Cocoyam and Wheat Flour Enriched with Soybean Flour

Food Science and Nutrition Studies ◽

10.22158/fsns.v3n2p39 ◽

2019 ◽

Vol 3 (2) ◽

pp. 39

Author(s):

Peter-Ikechukwu, A. ◽

Ibeabuchi, J.C. ◽

Eluchie, C.N. ◽

Agunwa, I.M. ◽

Aneke, E.J. ◽

...

Keyword(s):

Wheat Flour ◽

Functional Properties ◽

Absorption Capacity ◽

Composite Flour ◽

Oil Absorption ◽

Water Absorption Capacity ◽

Soybean Flour ◽

Emulsion Capacity ◽

Significant Difference ◽

Flour Blends

Functional properties of sausage rolls made from cocoyam and wheat flour enriched with soybean flour was studied. Cocoyam cormels and soybean were processed into flour, which were later used to formulate composite flour blends, with wheat flour in the ratio of: 90:10:0 (control 1), 80:10:10, 70:10:20, 60:10:40, 50:10:30, respectively, while 0:10:90 served as control 2. The result of the functional properties showed variation in behavior. There were no significant difference (p?0.05) in pH, bulk density, swelling index, foam capacity and emulsion capacity of the flour samples while significant difference (p?0.05) existed in water absorption capacity, oil absorption capacity and wettability.

Download Full-text

Evaluation of the Quality of Composite Maize-Wheat Chinchin Enriched with Rhynchophorous phoenicis

Journal of Food Research ◽

10.5539/jfr.v5n4p26 ◽

2016 ◽

Vol 5 (4) ◽

pp. 26 ◽

Cited By ~ 1

Author(s):

Ojinnaka, Dong ◽

Emeh, T. C. ◽

Okorie, S. U.

Keyword(s):

Wheat Flour ◽

Nutritional Quality ◽

Absorption Capacity ◽

Composite Flour ◽

Maize Flour ◽

Mineral Analysis ◽

Palm Weevil ◽

Significant Difference ◽

Flour Blends

The purpose of this research was to develop and evaluate a snack product (chin-chin) from composite maize-wheat flour blends enriched with edible palm weevil (Rhyhnchophorus phoenicis) paste. The maize-wheat chin-chin enriched with R. phoenicis were subjected to acceptability test using twenty member semi-trained panelist. The moisture, fat, protein and carbohydrate compositions of the snack samples had significant differences in their values. Sample 5M5R90W (containing 5% maize flour and Rhyhnchophorus phoenicis paste and 90% wheat flour) had the highest protein value of 19.05% while the least value 9.39% was obtained by sample 100M0R0W (100% maize flour alone). Sample 100M0R0W containing 100% maize flour also had the highest carbohydrate value of 75.24%. There was no significant difference in the ash and crude fiber contents of the chin-chin samples enriched with edible palm weevil paste. There were significant differences (P ≤ 0.05) in the functional properties of maize-wheat composite flour blends. Their wettability values ranged from 46.67 – 200 while the swelling index, bulk density and oil absorption capacity showed no significant difference in their values. The result of the mineral analysis showed phosphorus, magnesium and sodium had significant differences in their values in the range of 317.55 – 376.75mg/100g; 5.60 -13.60mg/100g;59.0 – 70.3mg/100g, respectively. There were no significant differences in the sensory attributes of the chin-chin samples. The result showed that an acceptable chin-chin product can be processed with the inclusion of the larva of edible palm weevil with maize-wheat composite flour to enhance the nutritional quality of the product.

Download Full-text