scholarly journals The evaluation of nutritional composition and functional and pasting properties of wheat flour-coconut flour blends

2019 ◽  
Vol 11 (1) ◽  
pp. 21-29 ◽  
Author(s):  
Folasade Maria Makinde ◽  
Ayobami Opeyemi Eyitayo
Keyword(s):  
Bulk Density ◽  
Wheat Flour ◽  
Cocos Nucifera ◽  
Proximate Analysis ◽  
Pasting Properties ◽  
Nutritional Composition ◽  
Absorption Capacity ◽  
Composite Flour ◽  
Iron And Zinc ◽  
Flour Blends

The feasibility of partially replacing wheat flour with coconut flour in baked products was investigated. Matured coconut (Cocos nucifera) endocarp was grated for the extraction of milk, dried, milled,and pulverized. Five blends of composite flour were prepared by combining wheat flour with 10% to 50% of partially defatted coconut flour,respectively. The 100% wheat flour served as control. The samples were analysed for proximate, mineral, functional,and pasting properties using standard procedures. The proximate analysis indicated 5.52 % moisture, 23.6% protein, 11.14% fibre, 5.4% fat, 5.21% ash,and 49.1% carbohydrate for coconut flour. The ranges of the proximate composition forthe flour blends were:moisture (4.79-5.55%), protein (14.9 -19.1%), fibre (0.44 -5.12%), fat (2.9 -5.3%), ash (0.68-2.13%), carbohydrate (62.7-76.2%),and energy (315.26-335.28 kCal). The values for moisture, protein, fat, fibre,and ash increased with the increasing levels of coconut substitution,except for carbohydrate and energy contents. There were significant differences (p≤0.05) in calcium, magnesium, potassium, phosphorus, iron,and zinc concentrations of the samples. The range of values obtained for these parameters was1.32-2.59 mg/kg, 2.60-3.83 mg/kg, 12.10-16.89 mg/kg, 12.40-18.50 mg/kg,0.50-1.22 mg/kg and 0.30-1.23 mg/kg, respectively. The ranges of functional properties were:loosed bulk density (0.28-0.49 g/mL),packed bulk density (0.44-0.75 g/mL), pH (5.77-6.57), swelling capacity (3.89-6.56%), water absorption capacity (0.89-3.97 ml/g),oil absorption capacity (1.26-3.20 ml/g),and gelation (12.0-18.0%). The pasting characteristics showed significant differences betweenthe100% wheat flour and coconut substituted samples. The results revealed modifications in nutritional, functional,and pasting properties in blends containing fractions of partially defatted coconut flour,which suggeststheir application in diverse food products.

scholarly journals Pasting Properties of Composite Flour Made from Sorghum, Millet and African Yam Bean

2021 ◽  
pp. 23-35
Author(s):  
J. N. Okafor ◽  
J. N. Ishiwu ◽  
J. E. Obiegbuna
Keyword(s):  
Water Absorption ◽  
Bulk Density ◽  
Pasting Properties ◽  
Absorption Capacity ◽  
Composite Flour ◽  
Water Absorption Capacity ◽  
African Yam Bean ◽  
Composite Flours ◽  
Gelation Concentration ◽  
Flour Blends

The aim of this research was to produce acceptable ‘fufu’ from a mixture of sorghum, millet, and African yam bean flours that will have a moderate carbohydrate and protein content with most optimized texture. The functional and sensory properties of flour blends produced from Sorghum, Millet and African yam bean was studied. Sorghum, Millet and African yam bean were processed into flour and mixed at different ratios to obtain composite flours. The flour formulations obtained were analyzed for water absorption capacity, bulk density, least gelation concentration , and viscosity .The  water absorption capacity ranged from 1.00 to 3.00,  the bulk density ranged from 0.56 to 0.82;the least gelation concentration ranged from 5.77 to 6.87,while the viscosity ranged from 0.956 to 9.30.Also proximate composition of the individual flours before formulation  was analyzed, it ranged from 6.13 to 8.46 moisture, 2.00 to 4.67 ash, 0.17 to 8.00 fiber,5.47 to 8.61 fat, 7.57 to 21.84 protein, 58.34 to 69.27 carbohydrate.The sensory values ranged from 5.60 to 6.45 for taste; 4.25 to 6.85  for colour; 5.15 to 6.80 for texture; 3.85 to 5.70 for aroma; 5.45 to 6.45 acceptability. Sample 10 (with the ratio of 40:70:20) had the highest rating for general acceptability. It was observed that sample 1(with the ratio of 60:50:60) had the lowest rating in taste and aroma. The mixture components that could produce optimum texture was determined through optimization plot. This work has demonstrated that acceptable ‘fufu’ with moderate protein and carbohydrate could be successfully produced using composite flours of sorghum, millet and African yam bean.

scholarly journals Functional Properties of Tigernut and Cowpea Flour Blends

2020 ◽  
Vol 2 (6) ◽  
Author(s):  
Patience C. Obinna-Echem ◽  
Happiness I. Wachukwu-Chikaodi ◽  
Okwagwung A. Dickson
Keyword(s):  
Bulk Density ◽  
Wheat Flour ◽  
Functional Properties ◽  
Good Alternative ◽  
Absorption Capacity ◽  
Composite Flour ◽  
Oil Absorption ◽  
Swelling Power ◽  
Cowpea Flour ◽  
Flour Blends

The pH and functional properties: water and oil absorption capacity, bulk density, solubility, swelling power and foaming capacity of tigernut and cowpea flour blends were determined. The flour blends were coded with the letters B, C, D, E, F, G and H for cowpea flour substitutions of 5, 10, 15, 20, 30, 40 and 50 % respectively. For comparison sample A1, A2 and A3 representing 100 % of wheat, tigernut and cowpea respectively, were also evaluated. Standard methods were used for all the analysis. pH of the flour samples varied significantly (P ≤ 0.05) from 5.60-6.23 for sample B (5 % cowpea flour substitution) and A2 (100% tiger nut flour) respectively. Water and oil absorption capacity varied significantly (P ≤ 0.05) from 1.00-2.90 ml/g and 0.39-1.38 ml/g respectively. Sample A1 (100% wheat flour) and Sample B (5% Cowpea: 95% tigernut flour) was significantly (P ≤ 0.05) the highest in water absorption capacity while sample A1 (% wheat flour) had the highest oil absorption capacity. Bulk density varied from 0.58 - 0.84 g/cm3. Although Cowpea flour (sample A3) had the highest bulk density, there was significant (P ≤ 0.05) decrease with increase in cowpea substitution. Swelling power and solubility ranged from 0.08-6.74 g/g and 8.00–67.35 % respectively. Sample A1 (% wheat flour) had significantly (P ≤ 0.05) the highest solubility and swelling power while Sample A3 (% cowpea flour) had the least. The functional properties of the tigernut-cowpea composite flour were comparable with that of the wheat flour, except for the swelling power that was significantly (P ≤ 0.05) higher for the wheat flour. The result showed that the composite tigernut-cowpea flour can be good alternative in the production of bakery products that would not require much swelling.

scholarly journals Functional and pasting properties of wheat/tigernut pomace flour blends and sensory attributes of wheat/tigernut pomace flour meat pie

2019 ◽  
Vol 11 (1) ◽  
pp. 30-36
Author(s):  
Idowu Michael Ayodele ◽  
Adeola Abiodun Aderpju ◽  
Oke Emmanuel Kehinde ◽  
Amusa Ayodeji Joseph ◽  
Omoniyi Saheed Adewale
Keyword(s):  
Wheat Flour ◽  
Control Sample ◽  
Pasting Properties ◽  
Sensory Attributes ◽  
Absorption Capacity ◽  
Composite Flour ◽  
Peak Time ◽  
Overall Acceptability ◽  
Significant Difference ◽  
Flour Blends

This study investigated the functional and pasting properties of wheat and tigernut pomace flour blends, as well as the sensory attributes of the meat pie obtained from the composite flour. Tigernut pomace flour was substituted for wheat flour in the amount of 2 –10%. Unsubstituted wheat flour served as the control. The composite blends were analysed for functional and pasting properties. The sensory attributes of the meat pie obtained from the composite flour were also determined. Bulk density, water absorption capacity, swelling power, and the solubility index of the blends ranged from 0.70 -0.75 g/mL, 0.62 -0.96%, 4.06 -4.47 g/g, and 2.45 -13.7% respectively. Peak, trough, breakdown, final, and setback viscosities, peak time, and pasting temperature ranged from 113.6 -135.9 RVU, 76.7 -90.2 RVU, 36.0 -45.8 RVU, 170 -183.7 RVU, 91.0 -93.6 RVU, 5.07 -6.03 min, and 88.4 -90.0 RVU respectively. In terms of appearance, the meat pie samples prepared from tigernut-substituted flour blends did not show significant difference (p < 0.05) from the control sample. The control sample had the highest overall acceptability, although samples from the composite blends were also found to be acceptable. Hence, tigernut pomace flour could be substituted for wheat at the amount of 10% to produce an acceptable meat pie.

Proximate composition, pasting and functional properties of composite flour blends from cassava and chia seeds flour

2021 ◽  
pp. 108201322110694
Author(s):  
Ashura Katunzi-Kilewela ◽  
Leonard MP Rweyemamu ◽  
Lilian D Kaale ◽  
Oscar Kibazohi ◽  
Roman M Fortunatus
Keyword(s):  
Functional Properties ◽  
Proximate Composition ◽  
Pasting Properties ◽  
Absorption Capacity ◽  
Composite Flour ◽  
Peak Time ◽  
Swelling Capacity ◽  
Pasting Temperature ◽  
Gelation Concentration ◽  
Flour Blends

The study established the proximate composition, pasting, and functional properties of cassava flour (CF) blended with chia seeds flour (CSF). Composite flour was prepared by blending CF with CSF in the ratios of 95:05, 90:10, 85:15, 80:20, and 75:25 with CF and CSF used as controls, respectively. The effect of blending significantly (p < 0.05) increased protein, fat, fibre, and ash contents as CSF increased. On other hand, moisture and carbohydrate contents decreased significantly. Pasting properties of composite flour blends decreased significantly (p < 0.05) as the incorporation of CSF increased and a noticeable change was observed for composite flour (75:25) except for peak time and pasting temperature. Functional properties of water absorption capacity (WAC) of CSF were significantly different with CF and composite flour blends. Oil absorption capacity (OAC) of CF and CSF were significantly different, while the composite flour blends had varied OAC due to the inclusion of the different amounts of CSF. The swelling capacity (SC) of CF and CSF were not significantly different, but composite flour blends were significantly different from both CSF and CF. The least gelation concentration (LGC) and bulk density (BD) increased significantly as chia seeds increased. Increased concentration of chia CSF in the composite flour blends showed to alter the functional properties. This study recommends composite flour 75:25 for processing semiliquid products like porridge due to reduced pasting properties values that may be associated with increased energy density compared to CF.

scholarly journals Characteristics of Coconut (Cocos nucifera) Flour and Its Application in Cake

2019 ◽  
pp. 1-11 ◽  
Author(s):  
Newlove A. Afoakwah ◽  
John Owusu ◽  
Victoria Owusu
Keyword(s):  
Moisture Content ◽  
Wheat Flour ◽  
Functional Properties ◽  
Proximate Composition ◽  
Cocos Nucifera ◽  
Absorption Capacity ◽  
Composite Flour ◽  
Total Carbohydrate ◽  
Cake Volume ◽  
Significant Difference

Aims: The aim of the study was to evaluate the physicochemical, sensory and functional properties of coconut flour (CF), coconut wheat composite flour (CWCF) and Cake produced from CF and CWCF. Methodology: Flour was prepared from matured ripe coconut fruit (CF). It was then blend with wheat flour (WF) into coconut wheat composite flour (CWCF) to produce cake. The CF and CWCF were subjected to proximate composition and functional properties analyses. Also, the physical properties, proximate composition and the sensory attributes of the cakes produced from CF and CWCF were determined. Results: The moisture content of CF and CWCF ranged from 4.5 to 9.04 g/100 g, the ash content of CF and CWCF ranged from 4.10 to 6.41 g/100 g and the dietary fiber content of CF was 11.16 g/100 g. CWCF exhibited a higher (87.1± 0.6) water absorption capacity and packed bulk density (0.79 ± 0.3 g/ mL). In this study, the cake volumes increased significantly (P < 0.05) in wheat flour (WF) as compared to CWCF and CF. The specific cake volume observed ranged from 1.48 to 2.01 mL/g. The blend of 50% coconut and 50% wheat flour increased significantly (P < 0.05) the moisture content of the CWCF cakes. The total carbohydrate content of the cakes varied from 20.40 ± 0.02 g/ 100 g to 63.05±0.14 g/ 100 g. Fat, ash and crude fiber and minerals (Ca, K, P Zn, Mg and Fe) increased in CWCF cakes. The sensory analysis conducted showed that there was a significant difference (P < 0.05) between CF cakes, WF cakes and CWCF cakes in the sensory qualities of appearance, texture, flavour and overall acceptability. In terms of appearance, the panelists scored coconut cake highest, but was significantly different (P < 0.05) from coconut wheat cake and wheat one. The least liked sample in terms of texture was wheat one. Conclusion: The present study underscored the potential application of coconut flour in the production of cake and possibly other bakery products.

scholarly journals Quality Assessment of Weaning Food from Blends of Sorghum, Mung Beans and Orange Fleshed Sweet Potato Blends

2020 ◽  
pp. 42-52
Author(s):  
H. T. Olaleye ◽  
T. O. Oresanya ◽  
E. O. Temituro
Keyword(s):  
Sweet Potato ◽  
Crude Protein ◽  
Proximate Analysis ◽  
Pasting Properties ◽  
Absorption Capacity ◽  
Peak Time ◽  
Weaning Food ◽  
Crude Fibre ◽  
Flour Blends ◽  
Orange Fleshed Sweet Potato

Prevalence of Malnutrition continues to be a plague ravaging children all over the world especially in developing countries such as Nigeria. Development of inexpensive, nutritious and readily available foods can mitigate against the challenges of malnutrition. Objective: To investigate the effect of different formulations of sorghum, mung beans and orange fleshed sweet potato flour blends on the proximate, functional, pasting properties and the sensory attributes of the weaning food blends. Methodology: Weaning foods were formulated from Sorghum grains (S), Mung beans (M) and (O) Orange fleshed sweet potato in ratios 40:45:15, 40:30:30, 25:35:45, 25:45:30 and 55:30:15 respectively. The blends of the weaning food were analyzed for the proximate, functional, pasting properties and sensory evaluation using standard methods. Data obtained were subjected to analysis of variance and means were separated using Duncan’s multiple range test p<0.05. Results: The proximate analysis of the blends had moisture content (8.15-9.58%), crude fat (1.47-2.76%), crude protein (14.00-18.04%), crude fibre (0.34-0.82%), total ash (1.86-2.52%) and carbohydrate (68.02-73.62%). Functional analysis: Bulk density 0.55-0.65 (g/cm3), swelling power (4.64-7.13%), solubility index (4.00-16.50%), water absorption capacity 1.58 (g/gcm3). Pasting: Peak viscosity: (87-214), Break-down viscosity (64-142), Trough viscosity (16-72), Final viscosity (50-175), Set back (28-103), Peak time (4.4.6 min), Pasting temperature (70.83°C). Blend S:M:O- 40:30:30 was rated most acceptable for all the parameters accessed. Conclusion: The blends of the weaning food showed that it can be a good source of carbohydrate, crude protein, minerals with low bulkiness and good reconstitution properties which can be used to solve malnutrition challenges in Nigeria.

scholarly journals Functional Properties of Sausage Rolls Made from Cocoyam and Wheat Flour Enriched with Soybean Flour

2019 ◽  
Vol 3 (2) ◽  
pp. 39
Author(s):  
Peter-Ikechukwu, A. ◽  
Ibeabuchi, J.C. ◽  
Eluchie, C.N. ◽  
Agunwa, I.M. ◽  
Aneke, E.J. ◽  
...  
Keyword(s):  
Wheat Flour ◽  
Functional Properties ◽  
Absorption Capacity ◽  
Composite Flour ◽  
Oil Absorption ◽  
Water Absorption Capacity ◽  
Soybean Flour ◽  
Emulsion Capacity ◽  
Significant Difference ◽  
Flour Blends

<p><em>Functional properties of sausage rolls made from cocoyam and wheat flour enriched with soybean flour was studied. Cocoyam cormels and soybean were processed into flour, which were later used to formulate composite flour blends, with wheat flour in the ratio of: 90:10:0 (control 1), 80:10:10, 70:10:20, 60:10:40, 50:10:30, respectively, while 0:10:90 served as control 2. The result of the functional properties showed variation in behavior. There were no significant difference (p?0.05) in pH, bulk density, swelling index, foam capacity and emulsion capacity of the flour samples while significant difference (p?0.05) existed in water absorption capacity, oil absorption capacity and wettability.</em></p>

scholarly journals Evaluation of the Quality of Composite Maize-Wheat Chinchin Enriched with Rhynchophorous phoenicis

2016 ◽  
Vol 5 (4) ◽  
pp. 26 ◽  
Author(s):  
Ojinnaka, Dong ◽  
Emeh, T. C. ◽  
Okorie, S. U.
Keyword(s):  
Wheat Flour ◽  
Nutritional Quality ◽  
Absorption Capacity ◽  
Composite Flour ◽  
Maize Flour ◽  
Mineral Analysis ◽  
Palm Weevil ◽  
Significant Difference ◽  
Flour Blends

<p>The purpose of this research was to develop and evaluate a snack product (chin-chin) from composite maize-wheat flour blends enriched with edible palm weevil (<em>Rhyhnchophorus phoenicis</em>) paste. The maize-wheat chin-chin enriched with <em>R. phoenicis </em>were subjected to acceptability test using twenty member semi-trained panelist. The moisture, fat, protein and carbohydrate compositions of the snack samples had significant differences in their values. Sample 5M5R90W (containing 5% maize flour and <em>Rhyhnchophorus phoenicis </em>paste and 90% wheat flour) had the highest protein value of 19.05% while the least value 9.39% was obtained by sample 100M0R0W (100% maize flour alone). Sample 100M0R0W containing 100% maize flour also had the highest carbohydrate value of 75.24%. There was no significant difference in the ash and crude fiber contents of the chin-chin samples enriched with edible palm weevil paste. There were significant differences (P ≤ 0.05) in the functional properties of maize-wheat composite flour blends. Their wettability values ranged from 46.67 – 200 while the swelling index, bulk density and oil absorption capacity showed no significant difference in their values. The result of the mineral analysis showed phosphorus, magnesium and sodium had significant differences in their values in the range of 317.55 – 376.75mg/100g; 5.60 -13.60mg/100g;59.0 – 70.3mg/100g, respectively. There were no significant differences in the sensory attributes of the chin-chin samples. The result showed that an acceptable chin-chin product can be processed with the inclusion of the larva of edible palm weevil with maize-wheat composite flour to enhance the nutritional quality of the product.</p>

scholarly journals Effect of Carrot Powder Addition on the Quality Attributes of Cookies Produced from Wheat and Soy Flour Blends

2019 ◽  
pp. 1-13
Author(s):  
M. T. Ukeyima ◽  
T. A. Dendegh ◽  
P. C. Okeke
Keyword(s):  
Wheat Flour ◽  
Proximate Composition ◽  
Absorption Capacity ◽  
Soy Flour ◽  
Composite Flour ◽  
Oil Absorption ◽  
Overall Acceptability ◽  
Spread Ratio ◽  
Powder Addition ◽  
Flour Blends

Aim: To evaluate effect of carrot powder addition on the quality attributes of cookies produced from wheat and soy flour blends. Study Design: Cookies were produced from wheat flour, soy flour and carrot powder composite blends. Functional (bulk density, foam capacity, oil absorption capacity, water absorption capacity and swelling index) properties, Proximate (crude protein, ash, moisture, crude fibre, crude fat, carbohydrate and energy value) composition, Physical (weight, diameter, thickness and spread ratio) and sensory (appearance, flavour, taste, texture and overall acceptability) attributes were determined. Results: The functional properties showed that Bulk Density ranged from 0.82 – 0.92, Foam capacity ranged 3.92 – 5.00, Oil Absorption Capacity ranged from 0.60 – 0.97%, Water Absorption Capacity ranged from 1.05 – 1.45% and Swelling Index ranged from 2.37 – 2.75. Results of percentage proximate composition showed that moisture content ranged from 4.70 – 7.57, protein content ranged from 10.61 – 21.60, fat content ranged from 8.89 – 15.85, fibre content ranged from 1.39 – 4.30, ash content ranged from 0.70 – 1.23 and carbohydrate content ranged from 52.34 – 70.84. The physical properties showed that weight of the cookies ranged from 17.85 – 21.60, diameter ranged from 57.50 – 60.50, thickness ranged from 20.50 – 24.00 and spread ratio ranged from 2.40 – 2.91. The sensory attribute showed that cookies produced from wheat flour, soy flour and carrot powder compared well with cookies produced with wheat flour. The wheat flour cookie sample (A) was most preferred by the panellist. Conclusion: The functional properties of the composite flour produced from wheat, soybean and carrot powder show potential quality that when properly harnessed could be used for the production of baked product like biscuits, pastry etc. The proximate composition shows that the composite flour cookies were the most preferred sample to the 100% wheat flour cookies. This is due to its high protein, fat, ash and fibre content to that of thee 100% wheat cookies. However, in terms of proximate composition, the composite cookies were most acceptable. The physical property of the cookies indicates that the composite flour cookies were most preferred to the 100% wheat cookie. This could be seen from the high values it’s had in weight, diameter and spread ratio. However, the sensory score of the overall acceptability shows that the 100% wheat cookies were most acceptable. Though, the composite flour cookies compete very closely with 100% wheat cookies.

scholarly journals Wheat-Fenugreek Composite Flour Noodles: Effect on Functional, Pasting, Cooking and Sensory Properties

2018 ◽  
Vol 6 (1) ◽  
pp. 174-182 ◽  
Author(s):  
Sanju Bala Dhull ◽  
Kawaljit Singh Sandhu
Keyword(s):  
Water Solubility ◽  
Pasting Properties ◽  
Absorption Capacity ◽  
Composite Flour ◽  
Crude Fibre ◽  
Overall Acceptability ◽  
Solid Loss ◽  
Emulsion Capacity ◽  
Flour Blends ◽  
Texture Attributes

Composite flour noodles were prepared by blending fenugreek flour (FF) with wheat flour (WF) at a replacement level of 2%, 5%, 7% and 10%, respectively. The chemical, functional, and pasting properties of different flour blends were assessed to check its suitability for noodle making. FF exhibited significantly (p 0.05) high protein (28.5%), crude fibre (7.2%), fat (4.9%) and ash content (3.6%) as compared with WF. Water absorption capacity, water solubility index, oil absorption capacity, foaming capacity and emulsion capacity showed an increase in values while the peak viscosity of flour blends decreased with increase in the level of FF. The noodles prepared with wheat-fenugreek flour blends showed higher cooking time, water uptake and cooked weight but less gruel solid loss as compared with control (100% WF) noodles. Noodles prepared with 93% WF+7% FF scored a satisfactory overall acceptability score for their sensory characteristics. Therefore, noodles with satisfactory eating, cooking, texture attributes can be prepared incorporating fenugreek flour up to a level of 7%, helps in exploring the health benefits of fenugreek.

Sign in / Sign up

Export Citation Format

Share Document