scholarly journals Secretory nerves of the prostate

2020 ◽  
Vol VI (2) ◽  
pp. 133-138
Author(s):  
N. Mislavsky ◽  
V. Borman
Keyword(s):  
Specific Gravity ◽  
Solid Residue ◽  
Neutral Reaction ◽  
Full Sense

That the separation of the prostatae is a permanent constituent of the sperm is a fact accepted by all; but the innervation of this gland is almost not affected by the researchers. The only indication on the participation of nerves in the process of separation we find in two memoirs of Eckhard, who observed the discharge of a certain amount of prostate juice into the urethra during irritation n. n. erigentes in dogs. This separation was suppressed only at the beginning of irritation of the nerves, and Eckhard came to the conclusion that erigens is not a separate nerve for the gland in the full sense of the word, but empties the already formed secret, acting on the musculature of the gland. Eckhard, however, managed to obtain a significant amount of secretion by direct irritation of the gland itself. The collected secret had a neutral reaction, a specific gravity of 1.012 and a solid residue of 2.5%, of which about 1% was proteins.

Contributions to the chemistry of the urine.—Paper IV. On so-called chylous urine

1851 ◽  
Vol 5 ◽  
pp. 930-932
Keyword(s):  
Specific Gravity ◽  
Total Solid ◽  
Solid Residue ◽  
Fatty Matter ◽  
The Third

The definition given of chylous urine is, that it is urine which is white from the suspension of fatty matter in it. An opportunity of observing a case of this disease having occurred to the author, he was led to make the experiments described in this paper. A harness-maker, age 32, half-caste, who had lived in London for twelve years, had been passing such water for nine months. On examination of the water made at 2 p. m. it solidified, looking like blanc-mange in ten minutes. It was very feebly acid, contained fibrin, albumen, blood-globules and fat; specific gravity=1015. 1000 grs. of this urine gave— 44·42 grs. total solid residue. 8·01 grs. total ash. 14·03 grs. albumen. 8·37 grs. fat. 13·26 grs. urea and extractive matter. ·75 gr. loss. 955·58 grs. water. In order to watch the variations produced by food and exercise in the appearance of the urine, every time the urine was made, for five days and nights it was passed into bottles marked with the hour. From these observations, and more particularly from the third, fourth, and sixth days, it was evident that the fibrin and albumen appear in the urine when no fat is there, and that the albuminous urine occurs before food has been taken, and disappears during the night with perfect rest. Thus the fourth day, at 7 h 15 m a. m., on first getting up the urine contained the slightest trace of albumen. The specific gravity = 1027; the precipitate by alcohol=0·8 gr. per 1000 grs. urine.

Valence electron spectroscopy of inhomogeneous media

1992 ◽  
Vol 50 (2) ◽  
pp. 1150-1151
Author(s):  
A. Howie ◽  
D.W. McComb
Keyword(s):  
Specific Gravity ◽  
Loss Function ◽  
Electron Spectroscopy ◽  
Valence Electron ◽  
Peak Height ◽  
Loss Functions ◽  
Loss Peak ◽  
High Energies ◽  
Valence Electron Density ◽  
Electron Microscopist

The bulk loss function Im(-l/ε (ω)), a well established tool for the interpretation of valence loss spectra, is being progressively adapted to the wide variety of inhomogeneous samples of interest to the electron microscopist. Proportionality between n, the local valence electron density, and ε-1 (Sellmeyer's equation) has sometimes been assumed but may not be valid even in homogeneous samples. Figs. 1 and 2 show the experimentally measured bulk loss functions for three pure silicates of different specific gravity ρ - quartz (ρ = 2.66), coesite (ρ = 2.93) and a zeolite (ρ = 1.79). Clearly, despite the substantial differences in density, the shift of the prominent loss peak is very small and far less than that predicted by scaling e for quartz with Sellmeyer's equation or even the somewhat smaller shift given by the Clausius-Mossotti (CM) relation which assumes proportionality between n (or ρ in this case) and (ε - 1)/(ε + 2). Both theories overestimate the rise in the peak height for coesite and underestimate the increase at high energies.

Float for Specific Gravity Determinations

1895 ◽  
Vol 39 (1011supp) ◽  
pp. 16162-16162
Author(s):  
T. Lohnstein
Keyword(s):  
Specific Gravity

On the Effect of 2-Layer Thickness by High-Specific Gravity Armor Blocks on Wave Reflection

1999 ◽  
Author(s):  
Masahiro Ito ◽  
Yuitch Iwagaki ◽  
Hiroshi Murakami ◽  
Kenji Nemoto ◽  
Masato Yamamoto ◽  
...  
Keyword(s):  
Specific Gravity ◽  
Layer Thickness ◽  
Wave Reflection ◽  
High Specific Gravity

Prehydrolysis kraft pulping of jute cutting and caddis mixture for rayon production

TAPPI Journal ◽  
2019 ◽  
Vol 18 (5) ◽  
pp. 287-293 ◽  
Author(s):  
JANNATUN NAYEEM ◽  
M. SARWAR JAHAN ◽  
RAZIA SULTANA POPY ◽  
M. NASHIR UDDIN ◽  
M.A. QUAIYYUM
Keyword(s):  
Kraft Pulping ◽  
Kappa Number ◽  
Pulp Yield ◽  
Solid Residue ◽  
Rayon Production ◽  
Kraft Cooking ◽  
Prehydrolysis Kraft

Jute cutting, jute caddis, and cutting-caddis mixtures were prehydrolyzed by varying time and temperature to get about 90% prehydrolyzed yield. At the conditions of 170°C for 60 min of prehydrolysis, the yield for 100% jute cutting was 76.3%, while the same for jute caddis was only 67.9%. But with prehydrolysis at 150°C for 60 min, the yield was 90% for jute cutting, where 49.94% of original pentosan was dissolved and prehydrolysis of jute caddis at 140°C in 60 min yielded 86.4% solid residue. Jute cutting-caddis mixed prehydrolysis was done at 140°C for 30 min and yielded 92% solid residue for 50:50 cutting-caddis mixtures, where pentosan dissolution was only 29%. Prehydrolyzed jute cutting, jute caddis, and cutting-caddis mixtures were subsequently kraft cooked. Pulp yield was only 40.9% for 100% jute cutting prehydrolyzed at 170°C for 60 min, which was 10.9% lower than the prehydrolysis at 140°C. For jute cutting-caddis mixed prehydrolysis at 140°C for 45 min followed by kraft cooking, pulp yield decreased by 3.3% from the 100% cutting to 50% caddis in the mixture, but 75% caddis in the mixture decreased pulp yield by 6.7%. The kappa number 50:50 cutting-caddis mixture was only 11.3. Pulp bleachability improved with increasing jute cutting proportion in the cutting-caddis mixture pulp.

Influence of anatomy on the adhesion performance of four wood species

2020 ◽  
Vol 9 (4) ◽  
pp. e31942727
Author(s):  
João Gabriel Missia da Silva ◽  
Pedro Nicó de Medeiros ◽  
Denise Ransolin Soranso ◽  
Vinicius Peixoto Tinti ◽  
José Tarcísio da Silva Oliveira ◽  
...  
Keyword(s):  
Shear Strength ◽  
Specific Gravity ◽  
Wood Species ◽  
Tectona Grandis ◽  
Glue Line ◽  
Anatomical Characteristics ◽  
Ray Cells ◽  
Adhesion Performance ◽  
Adhesion Process

The aim of this study was to evaluate the influence of anatomical characteristics on the adhesion performance of Vatairea sp., Paulownia sp., Aspidosperma populifolium and Tectona grandis wood. Specimens for anatomical, physical and mechanical analyzes were produced from tangentially oriented boards. The treatments were joint glued from pieces of the same anatomical orientation (radial and tangential), evaluated for shear strength and glue line failure. The Vatairea sp wood had the highest specific gravity (0.74 g cm-3) and the Paulownia sp (0.34 g cm-3) wood was smaller. Aspidosperma populifolium species showed the highest shear strength in the glue line in the tangential and radial faces. The anatomical variables with higher influence on the wood adhesion process were pith ray cells and especially fibers that exhibit the greatest correlation with the shear strength of the glue line.

New Method of Determining Specific Gravity

1955 ◽  
Vol 5 (1) ◽  
pp. 47-54
Author(s):  
J. Hammes
Keyword(s):  
Specific Gravity ◽  
New Method

MANUFACTURING GASEOUS PRODUCTS BY PYROLYSIS MICROALGAE BIOMASS

2019 ◽  
pp. 23-34
Author(s):  
N. I. Chernova ◽  
S. V. Kiseleva ◽  
O. M. Larina ◽  
G. A. Sytchev
Keyword(s):  
Raw Materials ◽  
Renewable Energy Sources ◽  
High Energy ◽  
Initial Mass ◽  
Solid Residue ◽  
Algae Biomass ◽  
Gaseous Products ◽  
Microalgae Biomass ◽  
Pyrolysis Liquid ◽  
Pyrolysis Gases

Algae biomass is considered as an alternative raw material for the production of biofuels. The search for new types of raw materials, including high-energy types of microalgae, remains relevant, since the share of motor fuels in the structure of the global fuel and energy balance remains consistently high (about 35%), and the price of oil is characterized by high volatility. The authors have considered the advantages of microalgae as sources of raw materials for fuel production. Biochemical and thermochemical conversion are proposed as technologies for their processing. This paper presents the results of the study of the pyrolysis of the biomass of clonal culture of blue-green microalgae / cyanobacteriumArthrospira platensis rsemsu 1/02-Pfrom the collection of the Research Laboratory of Renewable Energy Sources of the Lomonosov Moscow State University. An experiment to study the process of pyrolysis of microalgae biomass was carried out at the experimental facility of the Institute of High Temperatures RAS in pure nitrogen grade 6.0 to create an oxygen-free environment with a linear heating rate of 10 ºС / min from room temperature to 1000 ºС. The whole process of pyrolysis proceeded in the field of endothermy. The specific amounts of solid residue, pyrolysis liquid and gaseous products were experimentally determined. As a result of the pyrolysis of microalgae biomass weighing 15 g, the following products were obtained: 1) coal has the mass of the solid residue is 2.68 g, or 17.7% of the initial mass of the microalgae (while 9.3% of the initial mass of the microalgae remained in the reactor); 2) pyrolysis liquid – weight 3.3 g, or 21.9% of the initial weight; 3) non-condensable pyrolysis gases – weight 1.15 l. The specific volumetric gas yield (the amount of gas released from 1 kg of the starting material) was 0.076 Nm3/ kg. The analysis of the composition and specific volume yield of non-condensable pyrolysis gases formed in the process of pyrolysis, depending on temperature. It is shown that with increasing temperature, the proportion of highcalorie components of the gas mixture (hydrogen, methane and carbon monoxide) increases. The calorific value of the mixture of these gases has been estimated.

Sign in / Sign up

Export Citation Format

Share Document