Strong‐Motion Directionality and Evidence of Rupture Directivity Effects during the Chi‐Chi Mw 7.6 Earthquake

2019 ◽  
Vol 109 (6) ◽  
pp. 2367-2383
Author(s):  
Junju Xie
Keyword(s):  
Strong Motion ◽  
Clear Correlation ◽  
Rupture Directivity ◽  
Intensity Measures ◽  
Long Period ◽  
Forward Directivity ◽  
Chelungpu Fault ◽  
Fling Step ◽  
Motion Directionality ◽  
Directivity Effects

Abstract This article investigates the spatial distribution, predominant direction, and variations in the intensity measures (IMs) with orientation for classified pulse‐like and nonpulse motions during Chi‐Chi Mw 7.6 earthquake. The results show evidence of high polarization for long‐period spectral accelerations at relatively large source‐to‐site distances (50–100 km) north of the Chelungpu fault. The polarization of long‐period motions shows a clear correlation with the directivity parameters’ isochrone directivity predictor and ξ, indicating a connection between directionality and rupture directivity. The variation in strong‐motion directionality with the period is also studied. The discrepancy in directionality caused by strong directivity increases with the period from 1 to 10 s, which confirms a clear correlation of period‐dependent directionality with directivity effects. This study finds stronger directionality of pulse‐like motions than nonpulse motions for long periods over 3 s with higher maximum‐to‐median and maximum‐to‐minimum IM ratios. For periods over 3 s, the maximum‐to‐median ratios of pulse‐like motions are higher than the mean prediction of the Shahi and Baker (2014a) model, whereas those of nonpulse motions are lower than the prediction. However, this study does not find simple and clear results for the directions of the maximum component at different periods for pulse‐like and nonpulse motions. Despite clear differences between the unidirectional fling‐step and bidirectional forward directivity pulses, the effects of fling‐step and forward directivity are actually coupled in the waveforms.

Fling-step recovering from near-source waveforms and ground displacement attenuation models

2020 ◽  
Author(s):  
Maria D'Amico ◽  
Erika Schiappapietra ◽  
Giovanni Lanzano ◽  
Sara Sgobba ◽  
Francesca Pacor
Keyword(s):  
Low Frequency ◽  
Time History ◽  
Strong Motion ◽  
Response Spectra ◽  
Ground Displacement ◽  
Permanent Displacement ◽  
Processing Scheme ◽  
Long Period ◽  
Fling Step ◽  
Attenuation Models

<p>We present a processing scheme (eBASCO, extended BASeline COrrection) to remove the baseline of strong-motion records by means of a piece-wise linear de-trending of the velocity time history. Differently from standard processing schemes, eBASCO does not apply any filtering to remove the low-frequency content of the signal. This approach preserves both the long-period near-source ground-motion, featured by one-side pulse in the velocity trace, and the offset at the end of the displacement trace (fling-step). Hence, the software is suitable for the identification of fling-containing strong-motion waveforms. Here, we apply eBASCO to reconstruct the ground displacement of more than 400 three-component near-source waveforms recorded worldwide (NESS1, http://ness.mi.ingv.it/; Pacor et al., 2019) with the aim of: 1) extensively testing the eBasco capability to capture the long-period content of near-source records; 2) calibrating attenuation models for peak ground displacement (PGD), 5% damped displacement response spectra (DS), permanent displacement amplitude (PD) and period (Tp). The results could provide a more accurate estimate of ground motions, to be adopted for different engineering purposes such as performance-based seismic design of structures.</p><p>Pacor F., Felicetta C., Lanzano G., Sgobba S., Puglia R., D’Amico M., Russo E., Baltzopoulos G., Iervolino I. (2018). NESS v1.0: A worldwide collection of strong-motion data to investigate near source effects. Seismological Research Letters. https://doi.org/10.1785/0220180149</p>

The 4th February 1997 Bojnurd (Garmkhan) Earthquake in NE Iran: Field, Teleseismic, and Strong-Motion Evidence for Rupture Directivity Effects on a Strike-Slip Fault

2007 ◽  
Vol 11 (2) ◽  
pp. 193-214 ◽  
Author(s):  
James Hollingsworth ◽  
James Jackson ◽  
John E. Alarcón ◽  
Julian J. Bommer ◽  
Mohammad Javad Bolourchi
Keyword(s):  
Strong Motion ◽  
Strike Slip ◽  
Strike Slip Fault ◽  
Rupture Directivity ◽  
Directivity Effects ◽  
Ne Iran

scholarly journals Fling-Step Recovering from Near-Source Waveforms Database

Geosciences ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 67
Author(s):  
Erika Schiappapietra ◽  
Chiara Felicetta ◽  
Maria D’Amico
Keyword(s):  
Low Frequency ◽  
Time History ◽  
Strong Motion ◽  
Response Spectra ◽  
Ground Displacement ◽  
Permanent Displacement ◽  
Flat File ◽  
Processing Scheme ◽  
Long Period ◽  
Fling Step

We present an upgraded processing scheme (eBASCO, extended BASeline COrrection) to remove the baseline of strong-motion records by means of a piece-wise linear detrending of the velocity time history. Differently from standard processing schemes, eBASCO does not apply any filtering to remove the low-frequency content of the signal. This approach preserves both the long-period near-source ground-motion, featured by one-side pulse in the velocity trace, and the offset at the end of the displacement trace (fling-step). The software is suitable for a rapid identification of fling-containing waveforms within large strong-motion datasets. The ground displacement of about 600 three-component near-source waveforms has been recovered with the aim of (1) extensively testing the eBASCO capability to capture the long-period content of near-source records, and (2) compiling a qualified strong-motion flat-file useful to calibrate attenuation models for peak ground displacement (PGD), 5% damped displacement response spectra (DS), and permanent displacement amplitude (PD). The results provide a more accurate estimate of ground motions that can be adopted for different engineering purposes, such as performance-based seismic design of structures.

Effects of Fling Step and Forward Directivity on Seismic Response of Buildings

2006 ◽  
Vol 22 (2) ◽  
pp. 367-390 ◽  
Author(s):  
Erol Kalkan ◽  
Sashi K. Kunnath
Keyword(s):  
Seismic Response ◽  
Ground Motions ◽  
High Amplitude ◽  
Moment Frames ◽  
Steel Moment Frames ◽  
Damage Potential ◽  
Near Fault ◽  
Forward Directivity ◽  
Fling Step ◽  
Far Fault

This paper investigates the consequences of well-known characteristics of near-fault ground motions on the seismic response of steel moment frames. Additionally, idealized pulses are utilized in a separate study to gain further insight into the effects of high-amplitude pulses on structural demands. Simple input pulses were also synthesized to simulate artificial fling-step effects in ground motions originally having forward directivity. Findings from the study reveal that median maximum demands and the dispersion in the peak values were higher for near-fault records than far-fault motions. The arrival of the velocity pulse in a near-fault record causes the structure to dissipate considerable input energy in relatively few plastic cycles, whereas cumulative effects from increased cyclic demands are more pronounced in far-fault records. For pulse-type input, the maximum demand is a function of the ratio of the pulse period to the fundamental period of the structure. Records with fling effects were found to excite systems primarily in their fundamental mode while waveforms with forward directivity in the absence of fling caused higher modes to be activated. It is concluded that the acceleration and velocity spectra, when examined collectively, can be utilized to reasonably assess the damage potential of near-fault records.

Influence of floor system on seismic behavior of RC buildings to forward directivity and fling-step in the near-fault region

Structures ◽  
2021 ◽  
Vol 30 ◽  
pp. 803-817
Author(s):  
Sayed Mahmoud ◽  
Ali Alqarni ◽  
Joseph Saliba ◽  
Amal H. Ibrahim ◽  
Magdy genidy ◽  
...  
Keyword(s):  
Seismic Behavior ◽  
Rc Buildings ◽  
Near Fault ◽  
Forward Directivity ◽  
Fling Step ◽  
Floor System ◽  
Fault Region

scholarly journals Case Study of a Heavily Damaged Building during the 2016 MW 7.8 Ecuador Earthquake: Directionality Effects in Seismic Actions and Damage Assessment

Geosciences ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 74
Author(s):  
Luis A. Pinzón ◽  
Luis G. Pujades ◽  
Irving Medranda ◽  
Rodrigo E. Alva
Keyword(s):  
Damage Assessment ◽  
Strong Motion ◽  
Response Spectra ◽  
Seismic Action ◽  
Damage State ◽  
Ground Acceleration ◽  
Intensity Measures ◽  
Capacity Curves ◽  
Building Orientation

In this work, the directionality effects during the MW 7.8 earthquake, which occurred in Muisne (Ecuador) on 16 April 2016, were analyzed under two perspectives. The first one deals with the influence of these effects on seismic intensity measures (IMs), while the second refers to the assessment of the expected damage of a specific building located in Manta city, Ecuador, as a function of its azimuthal orientation. The records of strong motion in 21 accelerometric stations were used to analyze directionality in seismic actions. At the closest station to the epicenter (RRup = 20 km), the peak ground acceleration was 1380 cm/s2 (EW component of the APED station). A detailed study of the response spectra ratifies the importance of directionality and confirms the need to consider these effects in seismic hazard studies. Differences between IMs values that consider the directionality and those obtained from the as-recorded accelerograms are significant and they agree with studies carried out in other regions. Concerning the variation of the expected damage with respect to the building orientation, a reinforced concrete building, which was seriously affected by the earthquake, was taken as a case study. For this analysis, the accelerograms recorded at a nearby station and detailed structural documentation were used. The ETABS software was used for the structural analysis. Modal and pushover analyses were performed, obtaining capacity curves and capacity spectra in the two main axes of the building. Two advanced methods for damage assessment were used to obtain fragility and mean damage state curves. The performance points were obtained through the linear equivalent approximation. This allows estimation and analysis of the expected mean damage state and the probability of complete damage as functions of the building orientation. Results show that the actual probability of complete damage is close to 60%. This fact is mainly due to the greater severity of the seismic action in one of the two main axes of the building. The results are in accordance with the damage produced by the earthquake in the building and confirm the need to consider the directionality effects in damage and seismic risk assessments.

scholarly journals Near-Source Simulation of Strong Ground Motion in Amatrice Downtown Including Site Effects

Geosciences ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 186
Author(s):  
Alessandro Todrani ◽  
Giovanna Cultrera
Keyword(s):  
Ground Motion ◽  
Site Effects ◽  
Central Italy ◽  
Strong Motion ◽  
Seismic Source ◽  
Spectral Ratio ◽  
Intensity Measures ◽  
Standard Spectral Ratio ◽  
Heavy Damage ◽  
Strong Ground

On 24 August 2016, a Mw 6.0 earthquake started a damaging seismic sequence in central Italy. The historical center of Amatrice village reached the XI degree (MCS scale) but the high vulnerability alone could not explain the heavy damage. Unfortunately, at the time of the earthquake only AMT station, 200 m away from the downtown, recorded the mainshock, whereas tens of temporary stations were installed afterwards. We propose a method to simulate the ground motion affecting Amatrice, using the FFT amplitude recorded at AMT, which has been modified by the standard spectral ratio (SSR) computed at 14 seismic stations in downtown. We tested the procedure by comparing simulations and recordings of two later mainshocks (Mw 5.9 and Mw 6.5), underlining advantages and limits of the technique. The strong motion variability of simulations was related to the proximity of the seismic source, accounted for by the ground motion at AMT, and to the peculiar site effects, described by the transfer function at the sites. The largest amplification characterized the stations close to the NE hill edge and produced simulated values of intensity measures clearly above one standard deviation of the GMM expected for Italy, up to 1.6 g for PGA.

The June 13, 1975 earthquake and its relationship to the New Madrid seismic zone

1977 ◽  
Vol 67 (1) ◽  
pp. 209-218
Author(s):  
R. B. Herrmann ◽  
G. W. Fischer ◽  
J. E. Zollweg
Keyword(s):  
Parameter Estimation ◽  
Seismic Moment ◽  
Strong Motion ◽  
P Wave ◽  
Eastern North America ◽  
New Madrid Seismic Zone ◽  
Seismic Zone ◽  
Long Period ◽  
Consistent Solution ◽  
New Madrid

abstract The June 13, 1975 earthquake in the New Madrid seismic zone produced the first recorded strong-motion accelerograms for an event in the region, as well as the largest recorded accelerations to date for any event in eastern North America. The peak strong-motion values obtained from an analysis of the accelerograms are the following: amax = 43 cm/sec2, vmax = 1 cm/sec and dmax = 0.05 cm for the longitudinal S88°W component; amax = 31 cm/sec2, vmax = 0.6 cm/sec and dmax = 0.01 cm for the DOWN component; amax = 64 cm/sec2, vmax = 1.6 cm/sec2, and dmax = 0.09 cm for the tangential S02°E component. Source parameter estimation using long-period surface waves, Lg spectra, P-wave first motions and the integrated accelerograms leads to a consistent solution. The seismic moment is estimated to be 4E21 dyne-cm and the corner period 0.6 sec. The corner period-seismic moment pair for this event agrees with the regional scaling of these parameters observed by Street et al. (1975).

Sign in / Sign up

Export Citation Format

Share Document