scholarly journals A New Impedance Control Method Using Backstepping Approach for Flexible Joint Robot Manipulators

Author(s):  
Zhao-Hui Jiang ◽  
Tetsuya Irie
1995 ◽  
Vol 19 (3) ◽  
pp. 212-226
Author(s):  
A.T. Massoud ◽  
H.A. ElMaraghy

A nonlinear feedback impedance control approach is presented to control the position and/or force of flexible joints robot manipulators interacting with a compliant environment. A feedback linearizable fourth order model of the flexible joint robots interacting with that environment is constructed. In this model, the control input is related directly to the link position vector and its derivatives. A desired target Cartesian impedance is then specified for the end point of the flexible joints robot. A nonlinear feedback control law is derived to linearize the system and to impose the target impedance for the end point of the robot in the Cartesian space. The same controller is used when the robot is free (unconstrained) and when it interacts with an environment. Also, the input to the system, in both unconstrained and constrained motions, is the end point position and its derivatives. When in free motion, the robot will track the desired end-point position, but while in constrained motion, the desired end point position is used to obtain a desired force according to the specified impedance. An experimental two-link flexible joint robot manipulator, constrained by a straight wall, is used to evaluate the impedance control algorithm.


2000 ◽  
Vol 12 (3) ◽  
pp. 249-253
Author(s):  
Shin-ichi Nakajima ◽  

An active worktable, which can be applied to force control tasks of commercial robot manipulators, has been designed and built. The active worktable has several degrees of freedom and accommodates its position/force in accordance with the motion of a robot manipulator. A stiffness control method and an impedance control method are implemented in the active worktable to achieve compliant motion. Several experiments were carried out to confirm basic effectiveness of the active worktable.


2014 ◽  
Vol 672-674 ◽  
pp. 1770-1773 ◽  
Author(s):  
Fu Cheng Cao ◽  
Li Min Du

Aimed at improving the dynamic response of the lower limb for patients, an impedance control method based on sliding mode was presented to implement an active rehabilitation. Impedance control can achieve a target-reaching training without the help of a therapist and sliding mode control has a robustness to system uncertainty and vary limb strength. Simulations demonstrate the efficacy of the proposed method for lower limb rehabilitation.


2011 ◽  
Vol 520 (4) ◽  
pp. 1178-1181 ◽  
Author(s):  
Yu Muto ◽  
Nobuto Oka ◽  
Naoki Tsukamoto ◽  
Yoshinori Iwabuchi ◽  
Hidefumi Kotsubo ◽  
...  

2021 ◽  
Vol 13 (2) ◽  
Author(s):  
Emmanouil Spyrakos-Papastavridis ◽  
Jian S. Dai

Abstract This paper attempts to address the quandary of flexible-joint humanoid balancing performance augmentation, via the introduction of the Full-State Feedback Variable Impedance Control (FSFVIC), and Model-Free Compliant Floating-base VIC (MCFVIC) schemes. In comparison to rigid-joint humanoid robots, efficient balancing control of compliant bipeds, powered by Series Elastic Actuators (or harmonic drives), requires the design of more sophisticated controllers encapsulating both the motor and underactuated link dynamics. It has been demonstrated that Variable Impedance Control (VIC) can improve robotic interaction performance, albeit by introducing energy-injecting elements that may jeopardize closed-loop stability. To this end, the novel FSFVIC and MCFVIC schemes are proposed, which amalgamate both collocated and non-collocated feedback gains, with power-shaping signals that are capable of preserving the system's stability/passivity during VIC. The FSFVIC and MCFVIC stably modulate the system's collocated state gains to augment balancing performance, in addition to the non-collocated state gains that dictate the position control accuracy. Utilization of arbitrarily low-impedance gains is permitted by both the FSFVIC and MCFVIC schemes propounded herein. An array of experiments involving the COmpliant huMANoid reveals that significant balancing performance amelioration is achievable through online modulation of the full-state feedback gains (VIC), as compared to utilization of invariant impedance control.


Sign in / Sign up

Export Citation Format

Share Document