scholarly journals Characterization of a Closed Loop Pulsating Heat Pipe Using Ethanol with Different Angles

2021 ◽  
Vol 39 (4) ◽  
pp. 1365-1371
Author(s):  
Israa S. Ahmed ◽  
Hussain S. Abd ◽  
Ayad M. Al Jubori
Keyword(s):  
Heat Pipe ◽  
Thermal Performance ◽  
Closed Loop ◽  
Power Input ◽  
Working Fluid ◽  
Pulsating Heat Pipe ◽  
Power Inputs ◽  
Inclination Angles ◽  
Dry Out

In low-temperature difference, a closed-loop pulsating heat pipe (CLPHP) can be used as a cooling device due to its capability to transfer heat. The thermal performance of the CLPHP is affected by the working fluids. In this work, the effects of some operating parameters such as using ethanol as working fluid with 0.5 filling ratio, orientation, and power inputs are offered based on experimental study. Where the CLPHP was constructed and tested to achieve a better vision into the effect of orientation of 0°, 15°, 30°, 45°, and 90°, and power input of 50 W, 115 W, 215 W, and 450 W on the heat transfer characteristics and the thermal performance. The results indicated that the minimum thermal resistance can be reached at 0.1585 (℃/W) with an orientation of 90° and a power input of 450 W. The results revealed that the inclination angles and power inputs had considerable influence on the enhancement of the thermal performance of the CLPHP. For the low boiling temperature of the working fluid, the power input is more favorable because of fast startup compared with a high power input that leads to some difficulties like the dry-out phenomenon.

Effect of Inclination Angle on the Closed Loop Pulsating Heat Pipe Thermal Performance

2013 ◽  
Author(s):  
Pramod R. Pachghare ◽  
Ashish M. Mahalle
Keyword(s):  
Thermal Resistance ◽  
Heat Pipe ◽  
Thermal Performance ◽  
Inclination Angle ◽  
Heat Input ◽  
Closed Loop ◽  
Pulsating Heat Pipe ◽  
Working Fluids ◽  
Inclination Angles ◽  
R 134A

The closed loop pulsating heat pipe (CLPHP) is a passive two-phase heat transfer device, patented by Akachi (1990). Due to its excellent features, PHP has been considered as one of the promising technologies for electronic cooling, heat exchanger, etc. This paper presents an experimental study shows the effect of inclination angle on the thermal performance of CLPHP, which consist of 10 turns of copper tubes having inner and outer diameter 2 mm and 3.6 mm respectively. The equal lengths of evaporator, condenser and adiabatic sections are 50 mm each. Different working fluids are used as R-134a, Methanol and Water. For all experimentations, an optimum filling ratio was maintained 50% by volume. The thermal performance have been investigated with different inclination angles (viz. 0°, 20°, 40°, 60° and 90°) at various heat input from 5 to 50W in the steps of 5W. The thermal resistance (which is inversely proportional to thermal performance) of CLPHP at various heat input are plotted for different working fluids. The result shows that, the thermal resistance decreases as heat input increases. But at low heat input i.e. upto 25W, the thermal resistance decreases rapidly and the PHP performance is more sensitive to the inclination angle whereas high heat input i.e. above 25W, the thermal resistance decreases smoothly and less independent to the inclination angle. In all inclination angles, vertical bottom heat position (at 90°) of CLPHP gives best thermal performance due to presence of gravity force. At all inclination angles, the working fluid R-134a show best thermal performance followed by methanol and water.

Experimental Investigation of a Flat-Plate Closed-Loop Pulsating Heat Pipe

2019 ◽  
Vol 141 (9) ◽  
Author(s):  
Wessel W. Wits ◽  
Gerben Groeneveld ◽  
Henk Jan van Gerner
Keyword(s):  
Experimental Investigation ◽  
Flat Plate ◽  
Heat Pipe ◽  
Closed Loop ◽  
Electronics Cooling ◽  
Power Input ◽  
Working Fluid ◽  
Pulsating Heat Pipe ◽  
Thermo Electric ◽  
Temperature And Pressure

The thermal performance and operating modi of a flat-plate closed-loop pulsating heat pipe (PHP) are experimentally observed. The PHP is manufactured through computer numerical controlled milling and vacuum brazing of stainless steel 316 L. Next to a plain closed-loop PHP, also one that promotes fluid circulation through passive Tesla-type valves was developed. Each channel has a 2 × 2 mm2 square cross section, and in total, 12 parallel channels fit within the 50 × 200 mm2 effective area. During the experimental investigation, the power input was increased from 20 W to 100 W, while cooling was performed using a thermo-electric cooler (TEC) and thermostat bath. Three working fluids were assessed: water, methanol, and ammonia. The PHP was charged with a 40% filling ratio. Thermal resistances were obtained for different inclination angles. It was observed that the PHP operates well in vertical evaporator-down orientation but not horizontally. Moreover, experiments show that the minimum operating orientation is between 15 and 30 deg. Two operating modi are observed, namely, the thermosyphon modus, without excessive fluctuations, and the pulsating modus, in which both the temperature and pressure responses oscillate frequently and violently. Overall thermal resistances were determined as low as 0.15 K/W (ammonia) up to 0.28 and 0.48 K/W (water and methanol, respectively) at a power input of 100 W in the vertical evaporator-down orientation. Infrared thermography was used to visualize the working fluid behavior within the PHPs. Infrared observations correlated well with temperature and pressure measurements. The experimental results demonstrated that the developed flat-plate PHP design, suitable for high-volume production, is a promising candidate for electronics cooling applications.

Parametric Behaviour of Closed Loop Pulsating Heat Pipe in the Presence of Water As a Working Fluid

2019 ◽  
Author(s):  
Nagendra P. Yadav ◽  
Madhuri ◽  
Anil Kumar
Keyword(s):  
Thermal Resistance ◽  
Heat Pipe ◽  
Integrated Circuit ◽  
Closed Loop ◽  
Electronic Devices ◽  
Working Fluid ◽  
Pulsating Heat Pipe ◽  
Power Inputs ◽  
Variable Power ◽  
Circuit Technology

Abstract This paper focuses on the parametric behavior of a closed loop pulsating heat pipe in the presence of water as a working fluid. The experimental study was done in the presence of different vacuum pressures inside the heat pipe with 50 percent filling ratio. The temperature was measured through the DAQ system with help of Lab VIEW 15.1 software at 12 locations of heat pipe at variable power inputs (10W–70W). Thermal resistance and variation of temperature are used to predict the performance of the heat pipe. Thermal resistance of heat pipe decreases with decrease in vacuum pressure inside the heat pipe. This work is useful for the transfer of heat of electronic devices and integrated circuit technology due to the high coefficient of convective heat transfer in the presence of phase change of working fluid inside the heat pipe.

Experimental Investigations on Thermal Performance of a Multi-Turn Closed Loop Pulsating Heat Pipe

2012 ◽  
Vol 433-440 ◽  
pp. 5854-5860 ◽  
Author(s):  
Yu Wang ◽  
Wei Yi Li
Keyword(s):  
Heat Transfer ◽  
Heat Pipe ◽  
Thermal Performance ◽  
Heat Input ◽  
Closed Loop ◽  
Research Work ◽  
Design Parameters ◽  
Working Fluid ◽  
High Heat Flux ◽  
Pulsating Heat Pipe

Closed loop pulsating heat pipe (CLPHP) is a relatively new two-phase passive heat transfer device to suit present requirement of high heat flux dissipation in modern electronic components. The operating mechanism of CLPHP is not well understood and the present state of the technology cannot predict required design parameters for a given task. The aim of research work presented in this paper is to better understand thermal performance of CLPHP. A series of experimental investigation were conducted on a multi-turn CLPHP made of copper capillary tube of 2-mm inner diameter. Two kinds of working fluids viz. ethanol and acetone were employed. The influence characterization has been studied for the variation of heat input and filling ratio (FR) of the tested CLPHP. Thermal performance of the CLPHP is evaluated by heat transfer and thermal resistance. The results strongly demonstrate the effect of heat input and FR of the working fluid on thermal performance of the device.

A Simple Model Used to Predict the Thermal Performance of Flat-Plate Closed-Loop Pulsating Heat Pipe

2013 ◽  
Vol 316-317 ◽  
pp. 7-12
Author(s):  
Qing Ping Wu ◽  
Rui Xiang Wang ◽  
Xiao Peng Liu ◽  
Ya Jun Li ◽  
Rong Ji Xu ◽  
...  
Keyword(s):  
Experimental Data ◽  
Simple Model ◽  
Flat Plate ◽  
Heat Pipe ◽  
Thermal Performance ◽  
Tilt Angle ◽  
Heat Load ◽  
Closed Loop ◽  
Working Fluid ◽  
Pulsating Heat Pipe

The thermal performance Rov of Flat-Plate Closed-Loop Pulsating Heat Pipe(FCLPHP) are effected by several elements such as the heat load Q, the tilt angle θ and the filling ratio F, they are interacted each other. In order to predict the effect of Q and θ on the thermal performance at locations Q and θ other than the experimental data conditions, and to study the relationship among the Rov, Q and θ in the range of the experimental data, we need a fitted regression model to estimate the function relationship that describes the data. The postulated depends on the range of the regression variables encountered in the data. In this paper, a simple model was developed. Since the coefficients in the model have been estimated from the experimental data, studies were carried out on an experimental set-up. FC72 was employed as working fluid. Method of least squares was used for building the model. By using the model, effects of the heat load and the tilt angle on the thermal performance of FCLPHP were discussed. It was found that the tilt angle had minimum value in a certain heat load in the experimental range (θ=30° -70°), and it increases with the increase of heat load. A sensitivity analysis was done with the model.

scholarly journals Correlations to predict thermal performance affected by working fluid’s properties of vertical and horizontal closed-loop pulsating heat pipe

2016 ◽  
Vol 20 (5) ◽  
pp. 1555-1564
Author(s):  
Phrut Sakulchangsatjatai ◽  
Niti Kammuang-Lue ◽  
Kritsada On-Ai ◽  
Pradit Terdtoon
Keyword(s):  
Heat Pipe ◽  
Thermal Performance ◽  
Closed Loop ◽  
Heat Pipes ◽  
Bond Number ◽  
Working Fluid ◽  
Inlet Temperature ◽  
Pulsating Heat Pipe ◽  
Dimensionless Numbers ◽  
Adiabatic Section

Objectives of this paper are to investigate the effects of dimensionless numbers on the thermal performance, and to establish correlations to predict the thermal performance of the vertical and a horizontal closed-loop pulsating heat pipe. The heat pipes were made of long copper capillary tubes with 26 meandering turns and both the ends were connected together to form a loop. R123, R141b, acetone, ethanol, and water were chosen as variable working fluids with a constant filling ratio of 50% by total volume. The inlet temperature of the heating medium and the adiabatic section temperature were constantly controlled and maintained at 80?C and 50?C, respectively. The thermal performance was represented in terms of the Kutateladze number. It can be concluded that when the Prandtl number of the liquid working fluid, as well as the Karman number, increases, the thermal performance increases. On the other hand, when the Bond number, the Jacob number, and the Aspect ratio increase, the thermal performance decreases. These effects of the dimensionless numbers on the thermal performance are valid for both the heat pipes, except in the case of Bond number which has no effect on the thermal performance as far as the horizontal heat pipe is concerned. Moreover, correlations to predict thermal performance have been successfully established.

Sign in / Sign up

Export Citation Format

Share Document