scholarly journals AN EXPERIMENTAL INVESTIGATION OF HEAT TRANSFER CAPABILITY AND THERMAL PERFORMANCE OF CLOSED LOOP PULSATING HEAT PIPE WITH A HYDROCARBON AS WORKING FLUID

2016 ◽  
Vol 6 ◽  
Author(s):  
Roshan D. Bhagat ◽  
Kiran M. Watt
Keyword(s):  
Heat Transfer ◽  
Experimental Investigation ◽  
Heat Pipe ◽  
Thermal Performance ◽  
Closed Loop ◽  
Working Fluid ◽  
Pulsating Heat Pipe ◽  
Transfer Capability ◽  
Heat Transfer Capability

Thermal Performance of the Mini-Loop Heat Pipe (LHP)

2009 ◽  
Author(s):  
K. Tanaka ◽  
M. Katsuta ◽  
Y. Ohuchi ◽  
K. Saitho
Keyword(s):  
Heat Transfer ◽  
Heat Pipe ◽  
Thermal Performance ◽  
Physical Development ◽  
Working Fluid ◽  
Loop Heat Pipe ◽  
Transfer Capability ◽  
Heat Transfer Capability ◽  
Basic Equations ◽  
Test Result

In this paper, we describe the outline of experimental manufacture of the LHP. This LHP is made of a copper. The evaporator is φ19×95mm, the vapor tube is φ5×300mm, the condenser is φ3.5×600mm and the liquid tube is φ 3.5×300mm. The wick is made of the sintering copper. The working fluid is methanol. Second, we describe the test result of heat transfer capability of this LHP. Finally, I describe the basic equations that resolve the physical development of the LHP and how to estimate the each temperatures of the LHP.

Experimental Investigations on Thermal Performance of a Multi-Turn Closed Loop Pulsating Heat Pipe

2012 ◽  
Vol 433-440 ◽  
pp. 5854-5860 ◽  
Author(s):  
Yu Wang ◽  
Wei Yi Li
Keyword(s):  
Heat Transfer ◽  
Heat Pipe ◽  
Thermal Performance ◽  
Heat Input ◽  
Closed Loop ◽  
Research Work ◽  
Design Parameters ◽  
Working Fluid ◽  
High Heat Flux ◽  
Pulsating Heat Pipe

Closed loop pulsating heat pipe (CLPHP) is a relatively new two-phase passive heat transfer device to suit present requirement of high heat flux dissipation in modern electronic components. The operating mechanism of CLPHP is not well understood and the present state of the technology cannot predict required design parameters for a given task. The aim of research work presented in this paper is to better understand thermal performance of CLPHP. A series of experimental investigation were conducted on a multi-turn CLPHP made of copper capillary tube of 2-mm inner diameter. Two kinds of working fluids viz. ethanol and acetone were employed. The influence characterization has been studied for the variation of heat input and filling ratio (FR) of the tested CLPHP. Thermal performance of the CLPHP is evaluated by heat transfer and thermal resistance. The results strongly demonstrate the effect of heat input and FR of the working fluid on thermal performance of the device.

Operating Activity Visualization and Thermal Performance Measurement of Pulsating Heat Pipe

2016 ◽  
Vol 369 ◽  
pp. 42-47 ◽  
Author(s):  
Patrik Nemec ◽  
Zuzana Kolková ◽  
Milan Malcho
Keyword(s):  
Heat Transfer ◽  
Performance Measurement ◽  
Heat Pipe ◽  
Thermal Performance ◽  
Vapour Phase ◽  
Working Fluid ◽  
Internal Diameter ◽  
Pulsating Heat Pipe ◽  
Inner Diameter ◽  
Thermo Physical Properties

Heat pipe is well known device which is used to heat transfer phase-change of working fluid. Pulsating heat pipe (PHP) is special type of heat pipe which heat transfer by pulsating movement of working fluid. Article deals about operating activity and thermal performance measurement of this special heat pipe. Operating activity visualization of PHP was performed with PHP made from glass. The two types of PHPs were made. The first PHP has internal diameter of tube 1 mm, second PHP has internal diameter of tube 1.5 mm and both PHPs have eleven meanders. The working fluids used in PHP were water and Fluorinert FC-72. These fluids were chose for their different thermo-physical properties and the visualization observe formation of liquid and vapour phase working fluid during filling process and working operation.Next, the article describes thermal performance measurement of PHP depending on working fluid amount and heat source temperature. Measurement was performed with PHP made from copper tube with inner diameter 1.5 mm curved to the twenty one meanders and filled with water. The results give us image about formation and distribution of working fluid in pulsating heat pipe and about influence of working fluid amount on the heat transfer ability of pulsating heat pipe.

Effects of Surface Coating of Nanoparticles on Thermal Performance of Open Loop Pulsating Heat Pipes

2012 ◽  
Author(s):  
Mehdi Taslimifar ◽  
Maziar Mohammadi ◽  
Ali Adibnia ◽  
Hossein Afshin ◽  
Mohammad Hassan Saidi ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Heat Pipe ◽  
Thermal Performance ◽  
Surface Coating ◽  
Heat Pipes ◽  
Open Loop ◽  
Working Fluid ◽  
Pulsating Heat Pipe ◽  
Performance Of Heat Transfer

Homogenous dispersing of nanoparticles in a base fluid is an excellent way to increase the thermal performance of heat transfer devices especially Heat Pipes (HPs). As a wickless, cheap and efficient heat pipe, Pulsating Heat Pipes (PHPs) are important candidates for thermal application considerations. In the present research an Open Loop Pulsating Heat Pipe (OLPHP) is fabricated and tested experimentally. The effects of working fluid namely, water, Silica Coated ferrofluid (SC ferrofluid), and ferrofluid without surface coating of nanoparticles (ferrofluid), charging ratio, heat input, and application of magnetic field on the overall thermal performance of the OLPHPs are investigated. Experimental results show that ferrofluid has better heat transport capability relative to SC ferrofluid. Furthermore, application of magnetic field improves the heat transfer performance of OLPHPs charged with both ferrofluids.

Thermal Performance of an Open Loop Pulsating Heat Pipe With Ferrofluid (Magnetic Nano-Fluid)

2012 ◽  
Author(s):  
Mehdi Taslimifar ◽  
Maziar Mohammadi ◽  
Mohammad Hassan Saidi ◽  
Hossein Afshin ◽  
Mohammad Behshad Shafii ◽  
...  
Keyword(s):  
Thermal Resistance ◽  
Heat Pipe ◽  
Thermal Performance ◽  
Inclination Angle ◽  
Open Loop ◽  
Working Fluid ◽  
Pulsating Heat Pipe ◽  
Degree Relative ◽  
Nano Fluid ◽  
Transfer Capability

In the present research an experimental investigation is performed to explore the effects of working fluid, heat input, ferrofluid concentration, magnets location, and inclination angle on the thermal performance of an Open Loop Pulsating Heat Pipe (OLPHP). Obtained results show that using ferrofluid can improve the thermal performance and applying a magnetic field on the water based ferrofluid decreases the thermal resistance. It shows that at an inclination angle of the OLPHP to be zero, the thermal performance of the present OLPHP reduces. Best heat transfer capability was achieved at 67.5 degree relative to horizontal axis for all of working fluids. Variation of the magnets location leads to a different thermal resistance in the OLPHP charged with ferrofluid.

Modeling for Fluid Flow and Heat Transfer in Closed Loop Pulsating Heat Pipe

2020 ◽  
pp. 1-34
Author(s):  
Radhakanta Sarangi ◽  
Satya Prakash Kar ◽  
Abhilas Swain ◽  
Lalit Kumar Pothal
Keyword(s):  
Heat Transfer ◽  
Heat Pipe ◽  
Vapor Bubble ◽  
Closed Loop ◽  
Working Fluid ◽  
Vapour Bubble ◽  
Pulsating Heat Pipe ◽  
Time Step ◽  
Liquid Plug ◽  
Evaporation And Condensation

Abstract Numerical modelling of multi turn Closed Loop Pulsating Heat Pipe (CLPHP) is presented in this paper for ethanol as working fluid. Modelling is carried out for 1mm and 2mm ID PHP for different number of turns, different orientations and at constant wall temperature boundary conditions. Momentum and heat transfer variations with time are investigated numerically solving the one dimensional governing equations for vapor bubble and liquid plugs. Evaporation and condensation takes place by heat transfer through liquid film present around the vapour bubble. The code takes into account the realistic phenomena such as vapour bubble generation, liquid plug merging and super heating of vapor bubbles above its saturation temperature. During merging of liquid plugs, a time step adaptive scheme is implemented and this minimum time step was found to be 10−7 s. Nature of flow is investigated by momentum variation plot. Model results are compared with the experimental results from literature for nine different cases. Maximum variation in heat transfer for all these cases is found to be below ±34%. Keywords: Closed Loop Pulsating Heat Pipe, Liquid Plug, Plug momentum, Vapor Bubble, Heat Transfer, Thin Film Evaporation and Condensation

Experimental Investigations on the Thermal Performance of a Single Closed Loop Pulsating Heat Pipe Using TiO2 Nanofluid

2019 ◽  
Vol 141 (9) ◽  
Author(s):  
G. V. Pradeep ◽  
K. Rama Narasimha
Keyword(s):  
Heat Transfer ◽  
Heat Pipe ◽  
Thermal Performance ◽  
Closed Loop ◽  
Experimental Investigations ◽  
Pulsating Heat Pipe ◽  
Vertical Orientation ◽  
Stable Suspension ◽  
Bottom Heating ◽  
Heating Mode

This paper describes the experimental investigations conducted on a closed loop pulsating heat pipe (CLPHP) for assessing the thermal performance. The pulsating heat pipe has a single closed loop made of copper. The working fluids used are water and titanium dioxide nanofluids with varying concentrations of TiO2 nanoparticles (1.5% and 1%) on weight basis. The TiO2 particles are mixed in water to form a stable suspension using a sonicator. The heat input is varied between 40 W and 100 W in steps of 20 W. All experiments are conducted in the bottom heating mode (evaporator at the top) in the vertical and horizontal orientations. The parameters considered for evaluating the thermal performance are the temperature difference between evaporator and condenser, thermal resistance, heat transfer coefficient, and thermal conductivity. The results of the investigation reveal that the vertical orientation and increase in nanoparticle concentration favors better heat transfer performance of the single closed loop pulsating heat pipe.

Experimental Investigation of a Flat-Plate Closed-Loop Pulsating Heat Pipe

2019 ◽  
Vol 141 (9) ◽  
Author(s):  
Wessel W. Wits ◽  
Gerben Groeneveld ◽  
Henk Jan van Gerner
Keyword(s):  
Experimental Investigation ◽  
Flat Plate ◽  
Heat Pipe ◽  
Closed Loop ◽  
Electronics Cooling ◽  
Power Input ◽  
Working Fluid ◽  
Pulsating Heat Pipe ◽  
Thermo Electric ◽  
Temperature And Pressure

The thermal performance and operating modi of a flat-plate closed-loop pulsating heat pipe (PHP) are experimentally observed. The PHP is manufactured through computer numerical controlled milling and vacuum brazing of stainless steel 316 L. Next to a plain closed-loop PHP, also one that promotes fluid circulation through passive Tesla-type valves was developed. Each channel has a 2 × 2 mm2 square cross section, and in total, 12 parallel channels fit within the 50 × 200 mm2 effective area. During the experimental investigation, the power input was increased from 20 W to 100 W, while cooling was performed using a thermo-electric cooler (TEC) and thermostat bath. Three working fluids were assessed: water, methanol, and ammonia. The PHP was charged with a 40% filling ratio. Thermal resistances were obtained for different inclination angles. It was observed that the PHP operates well in vertical evaporator-down orientation but not horizontally. Moreover, experiments show that the minimum operating orientation is between 15 and 30 deg. Two operating modi are observed, namely, the thermosyphon modus, without excessive fluctuations, and the pulsating modus, in which both the temperature and pressure responses oscillate frequently and violently. Overall thermal resistances were determined as low as 0.15 K/W (ammonia) up to 0.28 and 0.48 K/W (water and methanol, respectively) at a power input of 100 W in the vertical evaporator-down orientation. Infrared thermography was used to visualize the working fluid behavior within the PHPs. Infrared observations correlated well with temperature and pressure measurements. The experimental results demonstrated that the developed flat-plate PHP design, suitable for high-volume production, is a promising candidate for electronics cooling applications.

Experimental Investigation and Performance Evaluation of a Multi Turn Closed Loop Pulsating Heat Pipe

2014 ◽  
Vol 592-594 ◽  
pp. 1554-1558 ◽  
Author(s):  
N. Narendra Babu ◽  
Rudra Naik
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Thermal Resistance ◽  
Transfer Coefficient ◽  
Heat Pipe ◽  
Closed Loop ◽  
Experimental Result ◽  
Working Fluid ◽  
Pulsating Heat Pipe ◽  
Working Fluids

Pulsating heat pipe (PHP) is a passive heat transfer device, which transfers heat from one region to another with exceptional heat transfer capacity. It utilizes the latent heat of vaporization of the working fluid as well as the sensible heat. As a result, the effective thermal conductivity is higher than that of the conductors. An experimental study on three turn closed loop pulsating heat pipe with three different working fluids viz., Acetone, Methanol, Heptane and distilled water were employed. The PHP is made up of brass material with an inner diameter of 1.95mm, with a total length of 1150 mm for different fill ratios (FR) was employed .The PHP is tested for the thermal resistance and the heat transfer coefficient. The experimental result strongly demonstrates that acetone is a better working fluid among the working fluids considered in terms of higher heat transfer coefficient and lower thermal resistance.

Sign in / Sign up

Export Citation Format

Share Document