Real-Time Implementation of Starting Current Limitation Method for Cereals Milling Systems Using dSPACE R&D Controller Board

The modern combustion engines and their systems are getting more complicated and sophisticated nowadays. It is no more possible to verify their function or actual technical state directly. Thus various methods of indirect diagnostics are being developed more and more rapidly. The on-board diagnostics is being increasingly applied to monitor and measure suitable diagnostic signals during operation, deviations from required or expected values are then recorded. This trend requires the application of completely disassembly-free techniques of measurements and the real-time analyzing of measured figures. This paper presents the results of the research on relation between the starter’s starting current and the engine combustion chamber tightness. The experiments were carried out for common four-cylinder engine.

Download Full-text

Design and Real Time Simulation of Artificial Intelligent Based MPP Tracker for Photo-Voltaic System

Volume 6B: Energy ◽

10.1115/imece2014-37967 ◽

2014 ◽

Author(s):

Shimi Sudha Letha ◽

Tilak Thakur ◽

Jagdish Kumar ◽

Dnyaneshwar Karanjkar ◽

Santanu Chatterji

Keyword(s):

Real Time ◽

Fuzzy Inference ◽

Resistive Load ◽

Pv System ◽

Inference System ◽

Artificial Intelligent ◽

Point Tracking ◽

Dspace 1104 ◽

Photo Voltaic ◽

Controller Board

This paper presents an Artificial Intelligent based Maximum Power Point Tracking (MPPT) of a photo-voltaic system implementation using dSPACE 1104. The paper also proposes a novel Adaptive Neuro-Fuzzy Inference System (ANFIS) / Constant Voltage Tracker (CVT) for a photovoltaic (PV) powered multilevel inverter which requires a fixed constant dc voltage at its input. The MPPT algorithms viz. perturb and observe, incremental conductance, neural network, ANFIS and ANFIS/CVT have been designed and implemented on laboratory prototype. The modeling of various MPPT algorithms have been done on MATLAB/SIMULINK platform. Real time simulations have been carried out using dSPACE R&D controller board and CONTROLDESK software. The performance comparisons of various MPPT techniques applied to stand-alone PV system with resistive load have been presented for varying solar radiation conditions. The authors hope that the comparative analysis presented in this work will be helpful for further research.

Download Full-text

Real-Time Lighting Control System for Smart Home Applications

Computer Engineering and Applications Journal ◽

10.18495/comengapp.v7i3.267 ◽

2018 ◽

Vol 7 (3) ◽

Author(s):

Dimas Budianto ◽

Siti Nurmaini ◽

Bambang Tutuko ◽

Sarifah Putri Raflesia

Keyword(s):

Control System ◽

Real Time ◽

Smart Home ◽

Human Life ◽

Simple Algorithm ◽

Lighting System ◽

Real Time Control ◽

Time Control ◽

Automation Equipment ◽

Controller Board

The use of pervasive computing in the context of home automation equipment will greatly facilitate life. Several building still use manual switch to turn on or turn off the lighting system. It becomes ineffective if the house has a lot of lights, due to it sometimes forget to turn off. Hence, the real-time control system for automatic lighting processing is desirable. An automatic control system will allow to control the illumination and it will decrease the energy costs. In this paper, the Fuzzy logic system-based Mamdani style is used to adjust the intensity of the lights. Based on simple algorithm the controller board is working in a real-time condition. As a result found, the implementation is successfully to control the lighting system with good performance. Thus, the fuzzy system can be built smart home concept that facilitate the human life.

Download Full-text

A new real time approach using dSPACE R&D Controller Board for reactive power control by SVC in autonomous wind-diesel hybrid power systems

International Journal of Engineering Science and Technology ◽

10.4314/ijest.v3i5.68565 ◽

2011 ◽

Vol 3 (5) ◽

Cited By ~ 2

Author(s):

P Sivachandran ◽

P Venkatesh ◽

S Balamurugan

Keyword(s):

Power Systems ◽

Power Control ◽

Real Time ◽

Reactive Power ◽

Hybrid Power Systems ◽

Reactive Power Control ◽

Hybrid Power ◽

Controller Board

Download Full-text

Direct torque control and current limitation method in start up of an induction machine

Seventh International Conference on Power Electronics and Variable Speed Drives ◽

10.1049/cp:19980568 ◽

1998 ◽

Cited By ~ 8

Author(s):

Y.A. Chapuis

Keyword(s):

Direct Torque Control ◽

Induction Machine ◽

Torque Control ◽

Current Limitation ◽

Start Up ◽

Limitation Method

Download Full-text

The development of real-time communication network based on Zigbee and Ethernet for Photovoltaic systems

Science and Technology Development Journal ◽

10.32508/stdj.v17i1.1265 ◽

2014 ◽

Vol 17 (1) ◽

pp. 5-15

Author(s):

Dung Quoc Phan ◽

Dat Ngoc Dao ◽

Hiep Chi Le

Keyword(s):

Communication Network ◽

Real Time ◽

High Speed ◽

Large Scale ◽

Low Cost ◽

Photovoltaic System ◽

Solar Inverter ◽

Ethernet Controller ◽

Controller Board ◽

High Level

In a large system with a lot of distribution solar sources which are all connected to the national grid, a communication system becomes the important part for data acquisition in order to control the whole system stable and efficiency. To deal with this challenge, this paper presents a solution based on Zigbee and Ethernet communication standard. Zigbee standard was created to be a specification of a high level wireless communication protocol which is not only secure, reliable, simple but also low cost and low power. With Zigbee, we can create a communication network for hundreds to thousands of mini solar sources in a large scale of photovoltaic system. Ethernet is a high speed wired communication technology that is used widely in industrial and automatic applications. Together Zigbee and Ethernet bring to us a real-time communication solution for the system. In the experiment prototype of this paper, we use the CC2530ZNP-Mini Kit to create a simple network includes one coordinate and one end device for the first step. The end device was configured to get current and voltage values from a 3-phase grid-connected solar inverter 800Wpk and then sends the values to the coordinate. After the coordinate received data, it would send them to an Ethernet controller board. To display the data through Ethernet, we embedded a web server on the Ethernet controller board. By this way, the data was easy to visualize and supervised by using any web browser.

Download Full-text