scholarly journals Study Regarding Accounting Treatment of Green Certificates in Romania

2021 ◽  
Vol 9 (12) ◽  
pp. 2761-2764
Author(s):  
Monica OCNEAN
Keyword(s):  
Public Finance ◽  
Renewable Energy ◽  
Electric Energy ◽  
Electrical Energy ◽  
Energy Regulation ◽  
Renewable Electricity ◽  
National Agency ◽  
System Operator ◽  
Green Certificates ◽  
The Cost

Accounting regulations approved through Order 1802/2014 makes remarks regarding the reflection of green certificates in accounting.      Green certificates are titles that attest the production of a quantity of electrical energy from renewable sources. These can be traded distinctly from the amount of electrical energy that they represent. A.N.R.E. (National Agency of Energy Regulation) rewards producers of renewable electricity to benefit the promotion of sustainable energy through green certificates. Electricity providers and some producers are required to purchase a number of green certificates on a quarterly basis. They are then required to transmit to the National Agency of Energy Regulation, in the specified format and by the deadline set by them, the quantities of electrical energy for which they need to purchase green certificates, in conformity with law 220/2008. The cost of green certificates is billed separately from the price of electric energy inaccounting tratament the invoice sent to the final customers. Providers or producers that do not meet the yearly quota must pay the value of green certificates not acquired in said timespan. According to the ministry’s of public finance Order 1802/2014, producers of renewable energy, that benefit from green certificates provided by the transport and system operator must register the green certificates received into their accountings using specific accounting accounts

scholarly journals An Augmented Virtuality Based Solar Energy Power Calculator in Electrical Engineering

2015 ◽  
Vol 5 (1) ◽  
pp. 4 ◽  
Author(s):  
Clement Ehimika Ohireime Onime ◽  
James Uhomoibhi ◽  
Ermanno Pietrosemoli
Keyword(s):  
Power Generation ◽  
Renewable Energy ◽  
Solar Energy ◽  
Renewable Energy Sources ◽  
Electrical Energy ◽  
Photovoltaic Panel ◽  
Augmented Virtuality ◽  
Hands On ◽  
Electrical Engineers ◽  
The Cost

It is becoming increasingly important to include information about power generation from renewable energy sources in the training of electrical engineers. Solar energy is arguably the most common renewable energy source in use today. Providing practical hands-on training on solar energy power generation today requires the use of photovoltaic panel devices which are used for transforming solar energy into electrical energy. In many developing countries, practical hands-on training on solar power generation is limited due to the cost of photovoltaic panel devices and so the training consists of theoretical and tutorial classes sometimes supported by remote and virtual laboratories. This paper presents an augmented virtuality tool where real-time information from a mobile device’s sensors is used directly within a virtual or computer generated environment. The tool provides a practical context for hands-on tutorial exercises on solar energy power generation.

scholarly journals Energies and Its Worldwide Research

Energies ◽  
2020 ◽  
Vol 13 (24) ◽  
pp. 6700
Author(s):  
Nuria Novas ◽  
Alfredo Alcayde ◽  
Isabel Robalo ◽  
Francisco Manzano-Agugliaro ◽  
Francisco G. Montoya
Keyword(s):  
Energy Efficiency ◽  
Renewable Energy ◽  
Energy Storage ◽  
Power Systems ◽  
Smart Grids ◽  
High Efficiency ◽  
Scientific Journal ◽  
Electric Energy ◽  
Electrical Energy ◽  
Energy Research

Energy efficiency and management is certainly one of the key drivers of human progress. Thus, the trends in the energy research are a topic of interest for the scientific community. The aim of this study is to highlight global research trends in this field through the analysis of a scientific journal indexed exclusively in the energy and fuels category. For this purpose, a journal has been selected that is in the center of the category considering its impact factor, which is only indexed in this category and of open access, Energies of the publisher MDPI. Therefore, a bibliometric analysis of all the contents of the journal between 2008 and 2020, 13,740 documents published, has been carried out. Analyzing the articles that are linked to each other by their citations, 14 clusters or research topics have been detected: smart grids; climate change–electric energy community; energy storage; bioenergy sources; prediction algorithms applied to power; optimization of the grid link for renewable energy; wind power; sustainability of power systems; hydrocarbon improvements; conversion of thermal/electrical energy; electric motor advancements; marine renewable energy; hydropower and energy storage; and preventive techniques in power transformers. The main keywords found were electric vehicle, renewable energy, microgrid, smart grid, and energy efficiency. In short, energy research remains necessary to meet the future challenge of sustainable energy with high efficiency and the exploration of new renewable resources, all for increasingly sustainable cities.

scholarly journals Increasing the energy efficiency of an enterprise by point compensating of power quality distortions

2019 ◽  
Vol 140 ◽  
pp. 04010 ◽  
Author(s):  
Egor Zamyatin ◽  
Irina Voytyuk ◽  
Elena Zamyatina
Keyword(s):  
Power Quality ◽  
Electric Energy ◽  
Electrical Energy ◽  
Implementation Costs ◽  
Three Stages ◽  
Pareto Method ◽  
Compensating Devices ◽  
Quality Of Electrical Energy ◽  
The Cost

The cost of any product includes the cost of electrical energy in its production. Enterprises use various methods to reduce the cost of electric energy. One of the most common methods is to reduce the loss of active power in the distribution network of an enterprise. This is achieved by compensating for distortions in the power quality of electrical energy using compensating devices. The method presented in the article offers point compensation of distortions in the power quality indicators of electric energy. Point connection of compensating devices allows their small number to be used. But, at the same time, a greater effect is achieved. The connection points of compensating devices are determined by the developed method. The method includes three stages: collecting data on consumers of electric energy at an enterprise and on the topology of the distribution electric network, analyzing the results obtained using the developed algorithm, and determining connection points using the Pareto method. Also, the developed method was compared with the classical ones according to the criterion of the ratio of implementation costs to the effect of its application.

ANÁLISE COMPARATIVA DO CUSTO PARA APLICAÇÃO DE UMA LÂMINA DE IRRIGAÇÃO UTILIZANDO ENERGIA ELÉTRICA E DIESEL

2016 ◽  
Vol 31 (3) ◽  
pp. 259
Author(s):  
Arionaldo De Sá Júnior ◽  
Jacinto de Assunção Carvalho
Keyword(s):  
Low Voltage ◽  
Electric Energy ◽  
Electrical Energy ◽  
Minas Gerais ◽  
Linear Increase ◽  
Energy Company ◽  
Cost Of Energy ◽  
Irrigation Depth ◽  
Tariff Rates ◽  
The Cost

Objetivou-se com a realização deste trabalho, estimar o custo com energia elétrica e à diesel para aplicação de 1 milímetro de lâmina de irrigação em uma área de 1 hectare. O grupo tarifário considerado foi o “B” para baixa tensão e subgrupo “B2 - Rural”. Os valores tarifários aplicados foram obtidos na Companhia energética de Minas Gerais – CEMIG. O valor adotado para o diesel foi respectivo à média observada na região sul de Minas Gerais no segundo semestre de 2012. Para efeito de cálculos, os rendimentos globais do conjunto motobomba e alturas manométricas totais adotadas foram, respectivamente; 60%, 65%, 70%, 75% e 10, 25, 75, 100, 125, 150, 175 e 200 m.c.a. Para o cálculo do custo total com a aplicação da lâmina de 1mm ha-1 foi considerado que o custo com a energia na atividade de irrigação representa 65% e 75% para elétrica e diesel, respectivamente. Os resultados obtidos mostram um crescimento linear dos custos com energia com o aumento da altura manométrica total. A utilização de sistemas motobomba mais eficientes reduz o custo com energia elétrica na ordem de 7% a 20% e diesel entre 4% a 16%, para as situações propostas.Em todos os casos a energia elétrica é mais favorável com relação ao custo.Palavras-chave: Lâmina de irrigação, Motobomba, Tarifa, Grupo tarifário.COMPARATIVE ANALYSIS OF THE COST OF AN IRRIGATION DEPTH USING ELECTRIC ENERGY AND DIESELABSTRACT: The aim of this study was to estimate the cost of electricity and diesel use for application of 1 mm water depth in an area of 1 hectare. The tariff group considered was "B" for low voltage and subgroup "B2 - Rural". The applied tariff rates were obtained from the energy company of Minas Gerais - CEMIG. The value adopted for a liter of diesel fuel was the average observed in the southern region of Minas Gerais in the second semester  of 2012. To do the  calculation, the overall yields adopted for  the whole pump and manometer total elevation  were, respectively, 60%, 65%, 70%, 75% and 10, 25, 75, 100, 125, 150, 175, 200 meters of water column. To calculate the total cost of 1mm ha-1 application, it was considered that the cost of energy on irrigation activity represents 65% and 75% for electricity and diesel, respectively. The results showed a linear increase of energy costs by increasing the manometer total elevation. The use of more efficient pump systems reduces the cost of electric power in the range of 7% to 20% and of diesel by 4% to 16% considering the proposed situations. In all cases, the electrical energy is more advantageous regarding the cost.Keywords: Depth irrigation, Motor-pump, Tariff, Tariff Group.

scholarly journals Simulation and Prototype Implementation of Hybrid H-bridge MLI with Minimum Switches

2019 ◽  
Vol 8 (6S2) ◽  
pp. 845-851
Keyword(s):  
Renewable Energy ◽  
Renewable Energy Sources ◽  
Electrical Energy ◽  
Power Supplies ◽  
Energy Sources ◽  
Multilevel Inverters ◽  
Switching Losses ◽  
Different Types ◽  
Continuous Power ◽  
The Cost

As the demand for electrical energy increases continuously, we cannot rely on the existing conventional source for continuous power supply, as they are diminishing fast. The renewable energy sources are the best alternative for this energy crisis. We have different types of renewable energy sources and choice of source depends on location and load requirement. The most prominent source is the solar energy because of its own advantages. The nature of supply from this source is DC and it is to be converted into AC for supply to consumers. However, inverters are used for this conversion but produces harmonics. The Multilevel inverters are the alternate choice over conventional inverters due to the advantages of Low dv/dt and lower switching losses. Out of various multilevel inverters, cascaded H bridge (CHB) MLI topology is a well known solution for reducing the harmonics, which needs more number of switches and isolation power supplies which further increases the cost. This paper describes a proposed hybrid H-bridge topology with reduced switches. The proposed topology is implemented in Matlab/Simulink and results for 5, 7, 9 and 11 level are analyzed with their THD in output voltage. Hardware model for 5-level inverter is developed using 8051 micro-controller and results are presented

USING FAN COIL UNITS TO REDUCE ELECTRIC ENERGY CONSUMPTION FOR THE FAN DRIVE

2021 ◽  
pp. 28-36
Author(s):  
Борис Петрович Новосельцев ◽  
Ирина Игоревна Шамилова
Keyword(s):  
Energy Consumption ◽  
Ventilation System ◽  
Electric Energy ◽  
Electrical Energy ◽  
Industrial Building ◽  
Electric Energy Consumption ◽  
Traditional Scheme ◽  
The Cost ◽  
Ventilation Systems

Объём потребления энергии, в том числе и электрической, в нашей стране непрерывно увеличивается. В связи с этим возникает необходимость максимального снижения затрат электрической энергии. В статье рассматривается возможность снижения электрической энергии в приточных системах вентиляции за счёт использования вентиляторов-доводчиков. Приведены результаты аэродинамического расчета двух вариантов приточной системы вентиляции промышленного здания. Первый вариант - традиционная схема с одним общим центральным вентилятором. Второй вариант - схема с использованием вентиляторов-доводчиков на отдельных ветвях системы. В результате проведенных расчетов показано, что установка вентиляторов-доводчиков позволит существенно снизить нагрузку на привод центрального вентилятора. The volume of energy consumption, including electricity, in our country is constantly increasing. In this regard, it becomes necessary to reduce the cost of electrical energy as much as possible. The article discusses the possibility of reducing electrical energy in supply ventilation systems through the use of fans. We present the results of the aerodynamic calculation of two variants of the supply ventilation system of an industrial building. The first option is the traditional scheme with one common central fan. The second option is a scheme using fan coil units on separate branches of the system. As a result of the calculations, it is shown that the installation of fan coil units will significantly reduce the load on the central fan drive.

scholarly journals Perhitungan Kebutuhan Daya Listrik untuk Penggerak Perahu Nelayan Bertenaga Surya

CYCLOTRON ◽  
2020 ◽  
Vol 3 (1) ◽  
Author(s):  
Radiratu K ◽  
Belly Yan Dewantara
Keyword(s):  
Free Energy ◽  
Renewable Energy ◽  
Solar Energy ◽  
Electric Energy ◽  
Electrical Energy ◽  
Energy System ◽  
Energy Requirements ◽  
Solar Panels ◽  
Fishing Boat ◽  
Body Design

Abstrak - Perahu merupakan salah satu armada yang digunakan para nelayan untuk mencari mata pencaharian. Namun pada umumnya pada saat perahu nelayan beropesi mengandalkan bahan bakar sebagai penggerak kapal, hal ini sangatlah tidak menguntungkan mengingat harga bahan bakar semakin mahal. Pada penelitian ini akan membahas desain dan perhitungan daya listrik penggerak perahu nelayan dimana enegi listrik didapat dari energi surya. Dengan adanya sistem pemanfaatan energi surya ini akan menghemat pengeluaran nelayan bahkan bisa dikatakan bahwa energi ini merupakan energi cuma-cuma atau gratis. Pada penelitian ini akan dihitung desain bodi perahu dengan kapasitas 2-3 orang, perhitungan kebutuhan alat penggerak, perhitungan kebutuhan energi listrik dan perhitungan panel surya yang akan digunakan. Hasil dari penelelitian ini dapat dijadikan kajian untuk pengembangan perahu ramah lingkungan, ekonomis, dan pemanfatan enegi surya yang merupakan energi terbarukan. Kapal yang dirancang mempunyai dimensi 3 meter dan lebar 1,33 meter dengan kecepatan 3-4 knot dan menggunakan panel surya dengan spesifikasi 150Wp sebanyak 3 buah.Kata kunci: perahu nelayan, energi penggerak kapal, panel surya, energi terbarukan, MPPTAbstract—Boat is one of the fleets that fishermen use livelihoods. But in general, when fishing boats oppose relying on fuel as a boat propeller, this is very unprofitable given the increasingly expensive. In this study will discuss the design and calculation of electric power driving a fishing boat where the electric energy is obtained from solar energy. Solar energy system will save fishermen's expenses. It can even be said that this energy is free energy. In this study the boat body design will be design with a capacity of 2-3 people, calculation of propulsion requirements, calculation of electrical energy requirements and calculation of solar panels to be used. The results of this research can be used as a study for the development of environmentally friendly, economical boats and the utilization of solar energy which is renewable energy. The ship was designed to have dimensions of 3 meters and 1.33 meters wide with a speed of 3-4 knots and uses 3 solar panels with capasity 150Wp.Keywords: fishing boat, boat propulsion energy, solar panel, renewable energy, MPPT

scholarly journals Rancang Bangun Passive Photovoltaic 50 Wp Di Laboratorium Energi Terbarukan Politeknik Negeri Malang

2020 ◽  
Vol 7 (3) ◽  
pp. 21-26
Author(s):  
Mohammad Noor Hidayat ◽  
Ahmad Hermawan ◽  
Afriana Viro Fadilla ◽  
Muhammad Aden Herry Prakoso ◽  
Nurhayati
Keyword(s):  
Power Generation ◽  
Renewable Energy ◽  
System Design ◽  
Solar Power ◽  
Electrical Energy ◽  
Solar Panels ◽  
Renewable Electricity ◽  
Generation System ◽  
Solar Power Generation ◽  
Power Generation System

Electrical energy is a very important part of human activity at this time. At present a very popular source of renewable electricity is energy (solar) through the use of solar power generation system. "Design Passive Photovoltaic 50 Wp in Renewable Energy Laboratory State Polytechnic of Malang" aims to plan and analyze the solar power generation system (PLTS), namely a capacity of 50 wp,so that it can be used as a guideline when going to design or implement PLTS on a larger scale. Based on the analysis and testing carried out, namely testing of 50 Wp passive solar panels under normal (clean) angles of 0º, 15º, 30º and shading angles of 0º, as well as the fouling angle of 0º produces the highest energy of 210.7 Wh when the condition of the solar panels is at an angle of normal 30º.

scholarly journals STUDI KELAYAKAN PEMBANGKIT LISTRIK TENAGA SURYA UNTUK PENERANGAN DI LOKASI WISATA PANTAI GEMAH TULUNGAGUNG JAWA TIMUR

INFO-TEKNIK ◽  
2021 ◽  
Vol 21 (2) ◽  
pp. 155
Author(s):  
Pondi Udianto ◽  
Asrori Asrori ◽  
Eko Yudianto
Keyword(s):  
Renewable Energy ◽  
Electric Energy ◽  
Electrical Energy ◽  
South Coast ◽  
Solar Panels ◽  
The South ◽  
Total Load ◽  
Calculation Results ◽  
Generating Capacity ◽  
In Series

The condition of electric energy at Gemah beach on the south coast of Tulungagung has not been fully supplied by PLN, so it is necessary to take advantage of renewable energy. This study aims to calculate the need for electrical energy at Gemah beach and calculate the number of solar panels and the required generating capacity. From the calculation results obtained: Total load energy per day 17392 Wh, Total load Ah requirement per day = 362 Ah, and need battery with capacity = 1358 Ah, capacity of selected battery in Amp-hour is 800 Ah, batteries in parallel is 2, Number of batteries in series = 24, Total number of batteries = 48, capacity of total battery is 1600 Ah, Total kilowatt-hour capacity of battery = 76.8 kWh. Meanwhile, for the purposes of generation required: The number of solar modules to meet the load requirements = 28 modules. Generating capacity = 5.6 kWp, rounded off to 6 kWp

scholarly journals Resource and Energy Efficient Method of Dried Fish Production

2020 ◽  
Author(s):  
Mikhail Ershov ◽  
Alexander Ershov ◽  
Ilya Selyakov
Keyword(s):  
Surface Layer ◽  
Electric Energy ◽  
Electrical Energy ◽  
Raw Material ◽  
Circulation Rate ◽  
Dehydration Process ◽  
Surface Layers ◽  
Fish Products ◽  
Lower Temperature ◽  
The Cost

The authors of the article propose a method of convective dehydration of fish products, which has an intermittent nature of implementation. The dehydration process consists of the continuous initial phase and following combined periods consisting of phases of drying and relaxation of dehydrated surface layer of the raw material. The necessity of applying relaxation is due to the fact that during the drying process the surface layers that have lost some of the moisture are significantly densified. The size of the capillaries for moisture passing through the surface layers is reduced. Near the surface a layer is formed, which lacks the significant mass of moisture and has low diffusion properties. As a result, the dehydration process of the entire sample slows down. The rational use of relaxation leads to restoring the moisture-conducting properties of the surface layer of fish. The supply of electrical energy to the heating elements is stopped during the relaxation. The minimum circulation rate of the drying agent is maintained in the drying installation. Fresh air with a lower temperature and higher relative humidity than the drying agent is supplied to the drying agent. The conditions in the drying installation restrain external mass transfer and facilitate to the relaxation of the dehydrated surface layer, that is, to the redistribution of moisture in the thickness of the fish. The proposed method of dehydration of fish raw material reduces the cost of electric energy in the production of dried products and provides more rational coolant usage. The final fish products have more attractive appearance due to reduction of tissue deformation as a result of applying the relaxation of dehydrated surface layer.

Sign in / Sign up

Export Citation Format

Share Document