scholarly journals Development of a roof bolter canopy air curtain for respirable dust control

2017 ◽  
Vol 69 (1) ◽  
pp. 33-39 ◽  
Author(s):  
W.R. Reed ◽  
G.J. Joy ◽  
B. Kendall ◽  
A. Bailey ◽  
Y. Zheng
2019 ◽  
Vol 7 (1) ◽  
pp. 79-87 ◽  
Author(s):  
W. R. Reed ◽  
M. Shahan ◽  
S. Klima ◽  
G. Ross ◽  
K. Singh ◽  
...  

AbstractA 3rd generation roof bolter canopy air curtain (CAC) has been developed and constructed by J.H. Fletcher & Co., Inc. As with the previous generation of the CAC, this design uses the principle of providing uniform airflow across the canopy area as recommended by the National Institute for Occupational Safety and Health. The new modifications include a plenum that is constructed of a single flat aluminum plate, smaller-diameter airflow openings, and a single row of perimeter nozzles designed to prevent mine air contaminated by respirable dust from entering the CAC protection zone. Field testing was conducted on this new 3rd generation design showing reductions in coal mine respirable dust exposure for roof bolter operators. Dust control efficiencies for the CAC for the left bolter operator (intake side) ranged from approximately 26%–60%, while the efficiencies for the CAC for the right bolter operator (return side) ranged from 3% to 47%.


2019 ◽  
Vol 29 (5) ◽  
pp. 711-720 ◽  
Author(s):  
W.R. Reed ◽  
S. Klima ◽  
M. Shahan ◽  
G.J.H. Ross ◽  
K. Singh ◽  
...  

2014 ◽  
Vol 955-959 ◽  
pp. 1020-1023 ◽  
Author(s):  
Wen Nie ◽  
Nai Guo Wang ◽  
Wei Min Cheng ◽  
You Ying Ma ◽  
Ya Ru Sun

To prevent high concentration dust on whole-rock comprehensive mechanization driving face efficiently, air curtain dust drawing and purification system were developed. This system is consisted of two sections, air curtain dust drawing device and dust purification system device. It determines optimized parameters of air curtain drawing dust device by combining site actual conditions and has realized short distance 3d dust absorbing and random movement. After using the efficient dust control system for whole-rock comprehensive mechanization driving face on south main return way,the average dust-laying rate of total coal dust and respirable dust in manually operation department, respectively reach 91.6% and 90.5%.It shows that this system is a efficient means for dust control of whole-rock comprehensive mechanization driving face.


Author(s):  
William R. Reed ◽  
Michael Shahan ◽  
Vasu Gangrade ◽  
Garron Ross ◽  
Kunal Singh ◽  
...  

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Kuan Wu ◽  
Shiliang Shi ◽  
Yijie Shi ◽  
Yong Chen

Dust is one of the main pollutants in coal mines, which seriously affects the physical and mental health of workers, as well as the safe production in underground mines. Dual-radial swirl shielding ventilation is a new ventilation method for a fully mechanized excavation face and can effectively reduce the dust concentration in the underground. The dust control effect of dual-radial swirl shielding ventilation is mainly affected by the thickness and integrity of the shielding air curtain, as well as the disturbance of the flow field near the air curtain. By changing the blowing and suction air volume ratio of the air duct, the strength of the radial air curtain can be improved, and the dust control effect of the dual-radial swirl shielding ventilation system can be effectively improved. In order to determine the optimal operating parameters of the dual-radial swirl shielding ventilation system, a numerical simulation method was used to conduct an in-depth study on the blowing and suction air volume ratio of the system. The results showed that when the blowing and suction air volume ratio of the air duct was 1.5, the radial air curtain had the highest strength. Under this condition, the dust concentration at the driver’s position of the roadheader was the lowest, and the dual-radial swirl shielding ventilation system can achieve an ideal dust control effect.


Sign in / Sign up

Export Citation Format

Share Document