scholarly journals Laboratory testing of a shuttle car canopy air curtain for respirable coal mine dust control

2018 ◽  
Vol 5 (3) ◽  
pp. 305-314 ◽  
Author(s):  
W. R. Reed ◽  
Y. Zheng ◽  
M. Yekich ◽  
G. Ross ◽  
A. Salem
2019 ◽  
Vol 29 (5) ◽  
pp. 711-720 ◽  
Author(s):  
W.R. Reed ◽  
S. Klima ◽  
M. Shahan ◽  
G.J.H. Ross ◽  
K. Singh ◽  
...  

2019 ◽  
Vol 7 (1) ◽  
pp. 79-87 ◽  
Author(s):  
W. R. Reed ◽  
M. Shahan ◽  
S. Klima ◽  
G. Ross ◽  
K. Singh ◽  
...  

AbstractA 3rd generation roof bolter canopy air curtain (CAC) has been developed and constructed by J.H. Fletcher & Co., Inc. As with the previous generation of the CAC, this design uses the principle of providing uniform airflow across the canopy area as recommended by the National Institute for Occupational Safety and Health. The new modifications include a plenum that is constructed of a single flat aluminum plate, smaller-diameter airflow openings, and a single row of perimeter nozzles designed to prevent mine air contaminated by respirable dust from entering the CAC protection zone. Field testing was conducted on this new 3rd generation design showing reductions in coal mine respirable dust exposure for roof bolter operators. Dust control efficiencies for the CAC for the left bolter operator (intake side) ranged from approximately 26%–60%, while the efficiencies for the CAC for the right bolter operator (return side) ranged from 3% to 47%.


Transactions ◽  
2016 ◽  
Vol 340 (1) ◽  
pp. 38-47
Author(s):  
J. Organiscak ◽  
J. Noll ◽  
D. Yantek

2017 ◽  
Vol 69 (1) ◽  
pp. 33-39 ◽  
Author(s):  
W.R. Reed ◽  
G.J. Joy ◽  
B. Kendall ◽  
A. Bailey ◽  
Y. Zheng

2011 ◽  
Vol 328-330 ◽  
pp. 372-375
Author(s):  
He Tang Wang ◽  
De Ming Wang ◽  
Wan Xing Ren

In order to overcvome the shortage of current dust control technology in coal mine, especially the traditional water spray method, a two-phase foam materials preparation experimental system was established based on the simulation of water and air conditions in underground coal mine. And a new technique which can prepare high-performance foam was proposed, and the main technical parameters and application conditions to implement foam dedusting were determined through plenty of experimental. Then, the new technique had been applied in two large underground coal mine. The results show that its dedusting efficiency to total dust and respirable dust reached 90.5% and 85.4% in the fully-mechanized excavated face, as 1.97 times and 1.88 times higher than water spray respectively. However, its water consumption is only as 10% to 20% as conventional water spray. It is proved that this new technique for preparation of foam can reduce mine dust concentration remarkably and improved the working environment obviously, and has a broad application prospect and promotion value to control dust in underground coal mines and other related industry.


Minerals ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 426
Author(s):  
Behrooz Abbasi ◽  
Xiaoliang Wang ◽  
Judith C. Chow ◽  
John G. Watson ◽  
Bijan Peik ◽  
...  

Respirable coal mine dust (RCMD) exposure is associated with black lung and silicosis diseases in underground miners. Although only RCMD mass and silica concentrations are regulated, it is possible that particle size, surface area, and other chemical constituents also contribute to its adverse health effects. This review summarizes measurement technologies for RCMD mass concentrations, morphology, size distributions, and chemical compositions, with examples from published efforts where these methods have been applied. Some state-of-the-art technologies presented in this paper have not been certified as intrinsically safe, and caution should be exerted for their use in explosive environments. RCMD mass concentrations are most often obtained by filter sampling followed by gravimetric analysis, but recent requirements for real-time monitoring by continuous personal dust monitors (CPDM) enable quicker exposure risk assessments. Emerging low-cost photometers provide an opportunity for a wider deployment of real-time exposure assessment. Particle size distributions can be determined by microscopy, cascade impactors, aerodynamic spectrometers, optical particle counters, and electrical mobility analyzers, each with unique advantages and limitations. Different filter media are required to collect integrated samples over working shifts for comprehensive chemical analysis. Teflon membrane filters are used for mass by gravimetry, elements by energy dispersive X-ray fluorescence, rare-earth elements by inductively coupled plasma-mass spectrometry and mineralogy by X-ray diffraction. Quartz fiber filters are analyzed for organic, elemental, and brown carbon by thermal/optical methods and non-polar organics by thermal desorption-gas chromatography-mass spectrometry. Polycarbonate-membrane filters are analyzed for morphology and elements by scanning electron microscopy (SEM) with energy dispersive X-ray, and quartz content by Fourier-transform infrared spectroscopy and Raman spectroscopy.


Sign in / Sign up

Export Citation Format

Share Document