scholarly journals Experimental Investigation of Formulation and Field Performance of Formate Based Drilling Fluid System for Vertical Well Drilling

2016 ◽  
Vol 2 (2) ◽  
Keyword(s):  
Experimental Investigation ◽  
Drilling Fluid ◽  
Field Performance ◽  
Fluid System ◽  
Well Drilling ◽  
Vertical Well

scholarly journals Experimental investigation of bio-enhancer drilling fluid additive: Can palm tree leaves be utilized as a supportive eco-friendly additive in water-based drilling fluid system?

2019 ◽  
Vol 10 (2) ◽  
pp. 595-603 ◽  
Author(s):  
Abo Taleb T. Al-Hameedi ◽  
Husam H. Alkinani ◽  
Shari Dunn-Norman ◽  
Mustafa A. Al-Alwani ◽  
Waleed H. Al-Bazzaz ◽  
...  
Keyword(s):  
Experimental Investigation ◽  
Drilling Fluid ◽  
Palm Tree ◽  
Tree Leaves ◽  
Fluid System ◽  
Water Based

Study of Drilling Fluid System of Resisting the High Temperature of 220 Degrees

2013 ◽  
Vol 753-755 ◽  
pp. 130-133
Author(s):  
Hui Hong Luo ◽  
Ze Hua Wang ◽  
Yu Xue Sun ◽  
Han Jiang
Keyword(s):  
High Temperature ◽  
Drilling Fluid ◽  
Fluid Loss ◽  
Borehole Stability ◽  
Fluid System ◽  
Well Drilling ◽  
Deep Well ◽  
Materials Used ◽  
Loss Control ◽  
Determine System

Focus on the high temperature rheological stability and the fluid loss control of resistance to high temperature drilling fluid system, further determine system formula and the formula of the high temperature drilling fluid system should be optimized. Eventually, a kind of organo-silica drilling fluid system of excellent performance which is resistant to high temperature of 220 degrees has been developed, and the system performances have been evaluated. The high temperature-resistant organo-silica drilling fluid system is of good shale inhibition, lubricity and borehole stability. The fluid loss is low and the filter cake is thin and tight, which can effectively prevent bit balling. The sand-carrying ability is good and the rheological property is easy to control. The performances of drilling fluid remain stable under high salinity and the system can resist the pollution of 6%NaCl and 0.5%CaC12. The materials used in this system are non-toxic, non-fluorescent and suitable for deep well drilling.

MEG and its Application in Drilling Fluid

2011 ◽  
Vol 287-290 ◽  
pp. 2088-2093
Author(s):  
Yu Xue Sun ◽  
Yu Ning Xie ◽  
Chang Xiao
Keyword(s):  
Horizontal Well ◽  
Drilling Fluid ◽  
Poor Performance ◽  
Horizontal Wells ◽  
Drilling Fluids ◽  
Structure And Properties ◽  
Fluid System ◽  
Well Drilling ◽  
Drilling Waste ◽  
Treatment Agent

Recently, oil-based drilling fluids are used mainly in horizontal wells, which are highly cost and have a poor performance to carry cuttings and may result in environmental problems because of the ineffective dispose of drilling waste. Therefore, a study is commenced to develop a water-based drilling fluid system (MEG drilling fluid system) that can satisfy the needs of horizontal well. The study begins with the molecular structure and properties of monomers about MEG. Then it selected the treatment agent which has a good compatibility with MEG, and confirms a best formula of MEG drilling fluid system. By the comparison between MEG and other drilling fluids, the former has evident advantages in cave preventing, lubricity, solid carrying and formation damage controlling; also it can minimize the environmental effects. The above proves that MEG drilling fluid system can well meet the need for horizontal well drilling.

The Application of PEM Drilling Fluid System in Environmentally Sensitivity Area

2001 ◽  
Author(s):  
Xu Shaocheng ◽  
Xiaojian Jin ◽  
Li Zili ◽  
Xinjing Xiang
Keyword(s):  
Drilling Fluid ◽  
Fluid System

Low ECD High Performance Invert Emulsion Drilling Fluids: Lab Development and Field Deployment

2021 ◽  
Author(s):  
Vikrant Wagle ◽  
Abdullah Yami ◽  
Michael Onoriode ◽  
Jacques Butcher ◽  
Nivika Gupta
Keyword(s):  
High Performance ◽  
Filter Cake ◽  
Drilling Fluid ◽  
Field Performance ◽  
Superior Performance ◽  
Core Material ◽  
Drilling Fluids ◽  
Invert Emulsion ◽  
Field Deployment ◽  
Permeability Studies

Abstract The present paper describes the results of the formulation of an acid-soluble low ECD organoclay-free invert emulsion drilling fluid formulated with acid soluble manganese tetroxide and a specially designed bridging package. The paper also presents a short summary of field applications to date. The novel, non-damaging fluid has superior rheology resulting in lower ECD, excellent suspension properties for effective hole cleaning and barite-sag resistance while also reducing the risk of stuck pipe in high over balance applications. 95pcf high performance invert emulsion fluid (HPIEF) was formulated using an engineered bridging package comprising of acid-soluble bridging agents and an acid-soluble weighting agent viz. manganese tetroxide. The paper describes the filtration and rheological properties of the HPIEF after hot rolling at 300oF. Different tests such as contamination testing, sag-factor analysis, high temperature-high pressure rheology measurements and filter-cake breaking studies at 300oF were performed on the HPIEF. The 95pcf fluid was also subjected to particle plugging experiments to determine the invasion characteristics and the non-damaging nature of the fluids. The 95pcf HPIEF exhibited optimal filtration properties at high overbalance conditions. The low PV values and rheological profile support low ECDs while drilling. The static aging tests performed on the 95pcf HPIEF resulted in a sag factor of less than 0.53, qualifying the inherent stability for expected downhole conditions. The HPIEF demonstrated resilience to contamination testing with negligible change in properties. Filter-cake breaking experiments performed using a specially designed breaker fluid system gave high filter-cake breaking efficiency. Return permeability studies were performed with the HPIEF against synthetic core material, results of which confirmed the non-damaging design of the fluid. The paper thus demonstrates the superior performance of the HPIEF in achieving the desired lab and field performance.

Pipe stick problems of deep well drilling

2021 ◽  
Vol 66 (05) ◽  
pp. 192-195
Author(s):  
Rövşən Azər oğlu İsmayılov ◽  
Keyword(s):  
Drilling Fluid ◽  
Drill Pipe ◽  
Drill String ◽  
Differential Pressure ◽  
Drilling Mud ◽  
Fluid Circulation ◽  
Well Drilling ◽  
Deep Well ◽  
Pressure Pipe ◽  
Bottomhole Pressure

The aricle is about the pipe stick problems of deep well drilling. Pipe stick problem is one of the drilling problems. There are two types of pipe stick problems exist. One of them is differential pressure pipe sticking. Another one of them is mechanical pipe sticking. There are a lot of reasons for pipe stick problems. Indigators of differential pressure sticking are increase in torque and drug forces, inability to reciprocate drill string and uninterrupted drilling fluid circulation. Key words: pipe stick, mecanical pipe stick,difference of pressure, drill pipe, drilling mud, bottomhole pressure, formation pressure

Application of Benzotriazole Corrosion Inhibitor in Synthetic-Based Drilling Fluid and its Overall Impact in Improving Drilling Fluid Functionality

2021 ◽  
Author(s):  
Zhao Xionghu ◽  
Saviour Bassey Egwu ◽  
Deng Jingen ◽  
Miao Liujie
Keyword(s):  
Corrosion Rate ◽  
Corrosion Inhibitor ◽  
Coefficient Of Friction ◽  
Hot Rolling ◽  
Drilling Fluid ◽  
Effect Of Temperature ◽  
Fluid Loss ◽  
Fluid Composition ◽  
Fluid System ◽  
Before And After

Abstract The effect of corrosion inhibitor Benzotriazole on synthetic-based mud system was studied. Rheological performance of the benzotriazole enhanced synthetic-based fluid system was studied and compared against the base mud. To study its effect on dynamic wellbore conditions, different drilling fluid compositions were placed in a hot rolling oven for 16 hours at temperatures 150 °C and 170°C and the effect of temperature on mud properties were studied. Tests carried out include rheological test (before and after hot rolling), filtrate pH, lubricity test, and fluid loss test. The corrosion penetration rate was studied using the weight loss method. Based on experiment results, the synthetic-based mud system which comprised of benzotriazole displayed a reduction in coefficient of friction up to 95.93%. At ambient condition, optimal ratio of mineral oil:benzotriazole (M:B) which gives best lubricity performance on synthetic-based mud system is 80:20. This leads to improved corrosion inhibition and lubricity of the synthetic-based fluid by reducing the coefficient of friction up to 90.13%. Increased temperature led to further decrease in coefficient of friction with a % torque reduction of 95.93 displayed by the 80:20 ratio M:B mud composition at 170 °C. Significant alterations of the mud composition rheological and fluid loss parameters before and after exposure to high temperature in hot rolling oven were not observed. pH values were maintained ≥7 at the dynamic conditions highlighting solubility of the formulated fluid composition and absence of contaminants which can pose significant threats to the rates of corrosion in drill pipes. Increasing the concentration of Benzotriazole led to a reduction in corrosion rate. However, as the temperature effect increased, the corrosion rate elevated. Based on results from this investigation, it was concluded that Benzotriazole can be applied as a corrosion inhibitor in a synthetic-based drilling fluid system as an alternative corrosion inhibitor without significant alteration of the base mud properties. Benefits of this will be the optimization of extended reach well drilling operations due to excellent lubricity performance, corrosion rate reduction, compatibility with HPHT wellbore condition and fluid loss control.

New Chemical Package Produces an Improved Shale Inhibitive Water-Based Drilling Fluid System

1987 ◽  
Author(s):  
J.A. Wingrave ◽  
E. Kubena ◽  
C.F. Douty ◽  
D.L. Whitfill ◽  
D.P. Cords
Keyword(s):  
Drilling Fluid ◽  
Fluid System ◽  
Water Based
Sign in / Sign up

Export Citation Format

Share Document