scholarly journals Effect of Hydrogen and Hydrogen Enriched Compressed Natural Gas Induction on the Performance of Rubber Seed Oil Methy Ester Fuelled Common Rail Direct Injection (CRDi) Dual Fuel Engines

Author(s):  
N. R. Banapurmath ◽  
Mallikarjun Bhovi ◽  
S. V. Khandal ◽  
V. S. Yaliwal
2018 ◽  
Vol 16 (4) ◽  
pp. 485 ◽  
Author(s):  
J.S. Femilda Josephin ◽  
V. Edwin Geo ◽  
Ankit Sonthalia ◽  
C. Bharatiraja ◽  
Fethi Aloui

2020 ◽  
Vol 6 ◽  
Author(s):  
Shouvik Dev ◽  
Hongsheng Guo ◽  
Brian Liko

Diesel fueled compression ignition engines are widely used in power generation and freight transport owing to their high fuel conversion efficiency and ability to operate reliably for long periods of time at high loads. However, such engines generate significant amounts of carbon dioxide (CO2), nitrogen oxides (NOx), and particulate matter (PM) emissions. One solution to reduce the CO2 and particulate matter emissions of diesel engines while maintaining their efficiency and reliability is natural gas (NG)-diesel dual-fuel combustion. In addition to methane emissions, the temperatures of the diesel injector tip and exhaust gas can also be concerns for dual-fuel engines at medium and high load operating conditions. In this study, a single cylinder NG-diesel dual-fuel research engine is operated at two high load conditions (75% and 100% load). NG fraction and diesel direct injection (DI) timing are two of the simplest control parameters for optimization of diesel engines converted to dual-fuel engines. In addition to studying the combined impact of these parameters on combustion and emissions performance, another unique aspect of this research is the measurement of the diesel injector tip temperature which can predict potential coking issues in dual-fuel engines. Results show that increasing NG fraction and advancing diesel direct injection timing can increase the injector tip temperature. With increasing NG fraction, while the methane emissions increase, the equivalent CO2 emissions (cumulative greenhouse gas effect of CO2 and CH4) of the engine decrease. Increasing NG fraction also improves the brake thermal efficiency of the engine though NOx emissions increase. By optimizing the combustion phasing through control of the DI timing, brake thermal efficiencies of the order of ∼42% can be achieved. At high loads, advanced diesel DI timings typically correspond to the higher maximum cylinder pressure, maximum pressure rise rate, brake thermal efficiency and NOx emissions, and lower soot, CO, and CO2-equivalent emissions.


2018 ◽  
Vol 16 (4) ◽  
pp. 485
Author(s):  
C. Bharatiraja ◽  
Fethi Aloui ◽  
J.S. Femilda Josephin ◽  
Ankit Sonthalia ◽  
V. Edwin Geo

Energy ◽  
2021 ◽  
Vol 216 ◽  
pp. 118957
Author(s):  
Hassan Sadah Muhssen ◽  
Siti Ujila Masuri ◽  
Barkawi Bin Sahari ◽  
Abdul Aziz Hairuddin

Author(s):  
Carrie M Hall ◽  
Michael Pamminger ◽  
James Sevik ◽  
Thomas Wallner

Recent increases in natural gas supply have led to a desire to leverage this fuel in the transportation sector. Dual fuel engines provide a platform on which to use natural gas efficiently; these engines, however, require new hardware and new control strategies to properly utilize two fuels simultaneously. This paper explores the impact of implementing dual fuel capabilities on a sedan and demonstrates that a dual fuel E10 and compressed natural gas engine is able to improve the average engine efficiency by up to 6.5% compared to a single fuel engine on standard drive cycles. An optimal control technique is also developed, and the proposed approach allows factors including fuel cost and fuel availability to be taken into account. Optimization at each time instant is investigated and contrasted with optimization over the entire cycle. Cycle optimization is shown to have particular value for cases in which the level in one fuel tank is low.


Sign in / Sign up

Export Citation Format

Share Document