scholarly journals Improved Current Doubler Rectifier

Author(s):  
Mihail Antchev

It is widespread to examine and explain the functioning of the standard “Current Doubler Rectifier” as strictly symmetrical according to the electrical current through the two inductances. The present work challenges this consideration and proposes a new version of the electrical circuit daigram where the current symmetry is improved. The proposed circuit is called “Improved Current Doubler Rectifier”.

Author(s):  
Dedi Riyan Rizaldi ◽  
Kasmah Harwati ◽  
Ziadatul Fatimah ◽  
Muh. Makhrus

Learning physics is of course a part of science and should be able to facilitate students to do lab sessions or experiments to prove the concepts learned. One of them relates to dynamic electricity at the secondary level. However, there are still many schools that do not have practical tools that can assist students in learning dynamic electricity equipment. Therefore, the writing of this article is to explain the process of making a simple KIT dynamic electrical circuit as the final product in the science practicum course. The process to create this KIT consists of three stages, namely preparation, implementation and testing. Based on the work carried out, this appears 1). The process of making a dynamic electrical circuit KIT is divided into two parts, namely making tool sets and storage boxes, and 2). Practical activities that can use this electrical circuit KIT include measuring the size of GGL on the battery, measuring the voltage and electrical current, as well as series and parallel circuits


2021 ◽  
Vol 3 (2) ◽  
pp. 155-164
Author(s):  
Susilo Hadi ◽  
Asep Yoyo Wardaya ◽  
Zaenul Muhlisin ◽  
Jatmiko Endro Suseno ◽  
Pandji Triadyaksa ◽  
...  

Research has been conducted on the comparison of the I-V characteristic curve between mathematical study and experiment of the generation of negative DC corona discharge in the Gradient Line-to-Plane (GL-P) electrode configuration. The reason for this research is to calculate the suitability of the corona discharge electrical current between the mathematical and experimental study. The active electrode used has length 2 cm and height 4 cm. This research is conducted with variations in the sharpness angle of the active electrode (θ) 300, 450, and 600 and variations in the distance between the electrodes () 2 cm, 3 cm, and 4 cm. The mathematical formulation of the value of the corona discharge electrical current in the configuration of the GL-P electrode is obtained by using the geometric concept approach, which is the formulation of the capacitance value of the ordinary electrical circuit, with the addition of the multiplication factor value k in the sharp area of the active electrode, because in that area the greatest plasma flow distance is obtained. The value of the multiplication factor  is obtained by fitting the curve between mathematical study and experiments. The I-V curve between the mathematical study and the corona discharge generation experiment has a high degree of similarity with the smallest percentage contacting point of 37.50%.The value of the multiplication factor  is influenced by the sharpness angle of the active electrode shape and the distance between the electrodes.


Author(s):  
Richard D. Brugger

Many Electrical Wiring Systems Include Ground Fault Circuit Interrupters (Gfci) As Protective Elements. The Application Is For Avoidance Of Electric Shock Injuries To A Person In The Event That Their Body Becomes Part Of An Electrical Circuit Path From A Live Wire And Ground. The Theory Behind The Device Is That If There Is A Difference In Electrical Current Flowing Through The Live (120 Volt Ac) Wire And The Neutral Wire, Then The Difference Current Is Flowing To Ground And Is Potentially Hazardous To A Person. Functionally, The Gfci Should Automatically Open The Electrical Circuit Above A Certain Ground Current Value. This Paper Explores How The Circuit May Fail To Provide The Protection For Which It Is Intended, And Result In An Electric Shock.


Energies ◽  
2018 ◽  
Vol 11 (9) ◽  
pp. 2485 ◽  
Author(s):  
Mihail Antchev

It is widely accepted to examine and explain the functioning of the standard “Current Doubler Rectifier” as strictly symmetrical according to the electrical current through the two inductances. The present work challenges this consideration and proposes a new version of the electrical circuit diagram where the current symmetry is improved. The proposed circuit is called the “Improved Current Doubler Rectifier”.


1990 ◽  
Vol 29 (04) ◽  
pp. 282-288 ◽  
Author(s):  
A. van Oosterom

AbstractThis paper introduces some levels at which the computer has been incorporated in the research into the basis of electrocardiography. The emphasis lies on the modeling of the heart as an electrical current generator and of the properties of the body as a volume conductor, both playing a major role in the shaping of the electrocardiographic waveforms recorded at the body surface. It is claimed that the Forward-Problem of electrocardiography is no longer a problem. Several source models of cardiac electrical activity are considered, one of which can be directly interpreted in terms of the underlying electrophysiology (the depolarization sequence of the ventricles). The importance of using tailored rather than textbook geometry in inverse procedures is stressed.


2020 ◽  
Vol 25 (3) ◽  
pp. 415-423
Author(s):  
Ahmed Lachhab ◽  
El Mehdi Benyassine ◽  
Mohamed Rouai ◽  
Abdelilah Dekayir ◽  
Jean C. Parisot ◽  
...  

The tailings of Zeida's abandoned mine are found near the city of Midelt, in the middle of the high Moulouya watershed between the Middle and the High Atlas of Morocco. The tailings occupy an area of about 100 ha and are stored either in large mining pit lakes with clay-marl substratum or directly on a heavily fractured granite bedrock. The high contents of lead and arsenic in these tailings have transformed them into sources of pollution that disperse by wind, runoff, and seepage to the aquifer through faults and fractures. In this work, the main goal is to identify the pathways of contaminated water with heavy metals and arsenic to the local aquifers, water ponds, and Moulouya River. For this reason, geophysical surveys including electrical resistivity tomography (ERT), seismic refraction tomography (SRT) and very low-frequency electromagnetic (VLF-EM) methods were carried out over the tailings, and directly on the substratum outside the tailings. The result obtained from combining these methods has shown that pollutants were funneled through fractures, faults, and subsurface paleochannels and contaminated the hydrological system connecting groundwater, ponds, and the river. The ERT profiles have successfully shown the location of fractures, some of which extend throughout the upper formation to depths reaching the granite. The ERT was not successful in identifying fractures directly beneath the tailings due to their low resistivity which inhibits electrical current from propagating deeper. The seismic refraction surveys have provided valuable details on the local geology, and clearly identified the thickness of the tailings and explicitly marked the boundary between the Triassic formation and the granite. It also aided in the identification of paleochannels. The tailings materials were easily identified by both their low resistivity and low P-wave velocity values. Also, both resistivity and seismic velocity values rapidly increased beneath the tailings due to the compaction of the material and lack of moisture and have proven to be effective in identifying the upper limit of the granite. Faults were found to lie along the bottom of paleochannels, which suggest that the locations of these channels were caused by these same faults. The VLF-EM surveys have shown tilt angle anomalies over fractured areas which were also evinced by low resistivity area in ERT profiles. Finally, this study showed that the three geophysical methods were complementary and in good agreement in revealing the pathways of contamination from the tailings to the local aquifer, nearby ponds and Moulouya River.


2021 ◽  
Vol 67 (1 Jan-Feb) ◽  
pp. 91
Author(s):  
N. Sene

This paper revisits Chua's electrical circuit in the context of the Caputo derivative. We introduce the Caputo derivative into the modeling of the electrical circuit. The solutions of the new model are proposed using numerical discretizations. The discretizations use the numerical scheme of the Riemann-Liouville integral. We have determined the equilibrium points and study their local stability. The existence of the chaotic behaviors with the used fractional-order has been characterized by the determination of the maximal Lyapunov exponent value. The variations of the parameters of the model into the Chua's electrical circuit have been quantified using the bifurcation concept. We also propose adaptive controls under which the master and the slave fractional Chua's electrical circuits go in the same way. The graphical representations have supported all the main results of the paper.


Sign in / Sign up

Export Citation Format

Share Document