scholarly journals Solution of Reynolds lubrication equation on evolving surfaces

2020 ◽  
pp. 1-20
Author(s):  
Elizaveta Vyacheslavovna Zipunova ◽  
Anton Valerievich Ivanov ◽  
Evgeny Borisovich Savenkov
Keyword(s):  
Lubrication Equation ◽  
Evolving Surfaces

Influence of new surface micro-structures on the performance behaviours of fluid film tilting pad thrust bearings

2021 ◽  
pp. 095440622110309
Author(s):  
JC Atwal ◽  
RK Pandey
Keyword(s):  
Mass Conservation ◽  
Performance Parameters ◽  
Algebraic Equations ◽  
The Finite Element Method ◽  
Thrust Bearings ◽  
Lubrication Equation ◽  
Tilting Pad ◽  
Minimum Film Thickness ◽  
Newton Raphson ◽  
Micro Structures

Performance parameters such as power loss, minimum film thickness, and maximum oil temperature of the sector-shaped tilting pad thrust bearings employing the new micro-structural geometries on pad surfaces have been investigated. The lubrication equation incorporating the mass-conservation issue is discretized using the finite element method and the solution of resulting algebraic equations is obtained employing a Newton-Schur method. The pad equilibrium in the analysis is established using the Newton-Raphson and Braydon methods. The influence of attributes of micro-structures such as depth, circumferential and radial positioning extents have been explored on the performance behaviours. It is found that with the new micro-structured pad surfaces, the performance parameters significantly improved in comparison to conventional plain and conventional rectangular pocketed pads.

Study on Water Cushion Belt Conveyor

2014 ◽  
Vol 1016 ◽  
pp. 14-18
Author(s):  
Xian Wei Liu ◽  
Jia Sheng Wang ◽  
Lan Tao Wu ◽  
Xin Zhang ◽  
Hua Cheng
Keyword(s):  
Reynolds Equation ◽  
Belt Conveyor ◽  
Working Mechanism ◽  
Film Properties ◽  
Practical Applications ◽  
Lubrication Equation ◽  
Start Up ◽  
New Type ◽  
Air Cushion ◽  
Lubricating Mechanism

Based on air cushion belt conveyor, a new type of belt conveyor named water cushion belt conveyor is proposed. It has a wide scope of applications for its features such as stability and reliability, capability of full load start-up, and environment-friendliness. This paper studies the working mechanism and lubricating mechanism of the water cushion belt conveyor. The basic lubrication equation of the water cushion is deduced from the universal form of the Reynolds equation used to study the pressure film properties of the water cushion. The design of the key part of the water cushion device is described in details. The research can be taken as a reference in practical applications.

Experimental and Theoretical Rotordynamic Characteristics of a Hybrid Journal Bearing

1997 ◽  
Vol 119 (1) ◽  
pp. 132-141 ◽  
Author(s):  
J. T. Sawicki ◽  
R. J. Capaldi ◽  
M. L. Adams
Keyword(s):  
Journal Bearing ◽  
Operating Conditions ◽  
Dynamic Force ◽  
Test Results ◽  
Force Measurements ◽  
Lubrication Equation ◽  
Load Cells ◽  
Theoretical Predictions ◽  
Stiffness And Damping

This paper describes an experimental and theoretical investigation of a four-pocket, oil-fed, orifice-compensated hydrostatic bearing including the hybrid effects of journal rotation. The test apparatus incorporates a double-spool-shaft spindle which permits independent control over the journal spin speed and the frequency of an adjustable-magnitude circular orbit, for both forward and backward whirling. This configuration yields data that enables determination of the full linear anisotropic rotordynamic model. The dynamic force measurements were made simultaneously with two independent systems, one with piezoelectric load cells and the other with strain gage load cells. Theoretical predictions are made for the same configuration and operating conditions as the test matrix using a finite-difference solver of Reynolds lubrication equation. The computational results agree well with test results, theoretical predictions of stiffness and damping coefficients are typically within thirty percent of the experimental results.

Static Determinacy in the Theory of Finite Width Foil Bearings

1974 ◽  
Vol 41 (1) ◽  
pp. 51-54 ◽  
Author(s):  
W. E. Langlois
Keyword(s):  
Force Balance ◽  
Finite Width ◽  
Foil Bearings ◽  
Lubrication Equation ◽  
Foil Bearing ◽  
Edge Conditions ◽  
Single Force ◽  
Static Determinacy ◽  
Force Balance Equation ◽  
Determinate Problem

The assumption of “perfect flexibility” is shown to be self-consistent in an important class of finite-width foil bearing problems. When the membrane equations are written in the “stretched coordinates” of foil bearing theory, the usual edge conditions on the tape result in a statically determinate problem. The tape dynamics couples to the Reynolds lubrication equation through a single force-balance equation which does not entail the elastic strain.

scholarly journals Numerical Bifurcation Analysis of a Film Flowing over a Patterned Surface through Enhanced Lubrication Theory

Fluids ◽  
2021 ◽  
Vol 6 (11) ◽  
pp. 405
Author(s):  
Nicola Suzzi ◽  
Giulio Croce
Keyword(s):  
Contact Angle ◽  
Bifurcation Analysis ◽  
Dynamic Contact Angle ◽  
Flow Characteristics ◽  
Dynamic Contact ◽  
Contact Angles ◽  
Inclined Plate ◽  
Lubrication Equation ◽  
Static Contact ◽  
Numerical Bifurcation

The bifurcation analysis of a film falling down an hybrid surface is conducted via the numerical solution of the governing lubrication equation. Instability phenomena, that lead to film breakage and growth of fingers, are induced by multiple contamination spots. Contact angles up to 75∘ are investigated due to the full implementation of the free surface curvature, which replaces the small slope approximation, accurate for film slope lower than 30∘. The dynamic contact angle is first verified with the Hoffman–Voinov–Tanner law in case of a stable film down an inclined plate with uniform surface wettability. Then, contamination spots, characterized by an increased value of the static contact angle, are considered in order to induce film instability and several parametric computations are run, with different film patterns observed. The effects of the flow characteristics and of the hybrid pattern geometry are investigated and the corresponding bifurcation diagram with the number of observed rivulets is built. The long term evolution of induced film instabilities shows a complex behavior: different flow regimes can be observed at the same flow characteristics under slightly different hybrid configurations. This suggest the possibility of controlling the rivulet/film transition via a proper design of the surfaces, thus opening the way for relevant practical application.

Numerical evidence of persisting surface roughness when deposition stops

2022 ◽  
Vol 2022 (1) ◽  
pp. 013202
Author(s):  
Chuan Wang ◽  
Hui Xia
Keyword(s):  
Stochastic Models ◽  
Sand Dune ◽  
Angle Of Repose ◽  
Scaling Properties ◽  
Interesting Issue ◽  
Material Deposition ◽  
Evolving Surface ◽  
Qualitative Exploration ◽  
Flattening Process ◽  
Evolving Surfaces

Abstract Do evolving surfaces become flat or not with time evolving when material deposition stops? As one qualitative exploration of this interesting issue, modified stochastic models for persisting roughness have been proposed by Schwartz and Edwards (2004 Phys. Rev. E 70 061602). In this work, we perform numerical simulations on the modified versions of Edwards–Wilkinson (EW) and Kardar–Parisi–Zhang (KPZ) systems when the angle of repose is introduced. Our results show that the evolving surface always presents persisting roughness during the flattening process, and sand dune-like morphology could gradually appear, even when the angle of repose is very small. Nontrivial scaling properties and differences of evolving surfaces between the modified EW and KPZ systems are also discussed.

Sign in / Sign up

Export Citation Format

Share Document