scholarly journals Detection of Bromide Ions in Water Samples with a Nanomolar Detection Limit using a Potentiometric Ion-selective Electrode

Author(s):  
Lijuan Kou ◽  
2017 ◽  
Vol 7 (1) ◽  
Author(s):  
Lei Li ◽  
Haiwei Yin ◽  
Yang Wang ◽  
Jianhua Zheng ◽  
Huidan Zeng ◽  
...  

Water ◽  
2021 ◽  
Vol 13 (20) ◽  
pp. 2869
Author(s):  
Cecylia Wardak ◽  
Karolina Pietrzak ◽  
Małgorzata Grabarczyk

A new copper sensitive all solid-state ion-selective electrode was prepared using multiwalled carbon nanotubes-ionic liquid (1-butyl-3-methylimidazolium hexafluorophosphate) nanocomposite as an additional membrane component. The effect of nanocomposite content in the membrane on the electrode parameters was investigated. The study compares, among others, detection limits, sensitivity, and the linearity ranges of calibration curves. Content 6 wt.% was considered optimal for obtaining an electrode with a Nernstian response of 29.8 mV/decade. An electrode with an optimal nanocomposite content in the membrane showed a lower limit of detection, a wider linear range and pH range, as well as better selectivity and potential stability compared to the unmodified electrode. It was successfully applied for copper determination in real water samples.


2018 ◽  
Vol 2018 ◽  
pp. 1-18 ◽  
Author(s):  
Aldo J. Kitalika ◽  
Revocatus L. Machunda ◽  
Hans C. Komakech ◽  
Karoli N. Njau

This study reports the variations of fluoride ions in rivers on the slopes of Mount Meru in the northern part of Tanzania. More than 318 water samples were collected from Temi, Nduruma, Tengeru, and Maji ya Chai Rivers in both wet (mid-March and April) and dry (August) seasons. The samples were analyzed for fluoride levels using Ion Selective Electrode (ISE). The minimum and maximum average fluoride levels in the wet season were 0.24±0.03 mg/l and 65.20±0.03 mg/l, respectively, whereas the average lowest and highest levels in the dry season were 1.02±0.02 mg/l and 69.01±0.03 mg/l, respectively. Tengeru River had the lowest fluoride levels in both seasons, whereas Maji ya Chai recorded the highest fluoride levels in both seasons. The headwater of all rivers with the exception of Maji ya Chai met the World Health Organization’s (WHO) maximum acceptable fluoride levels of 1.50 mg/l and the downstream environment qualified for Tanzania Bureau of Standards (TBS) maximum permissible fluoride concentration in drinking water of 4.00 mg/l. Also, the laboratory experiments showed that fluoride containing rocks exposed to pH above 7.6 display high leaching of F− in solution which gradually increased with the increase in pH, indicating that dissolution of fluoride in water is a function of pH.


1977 ◽  
Vol 60 (3) ◽  
pp. 625-627
Author(s):  
Ivan Sekerka ◽  
Josef F Lechner ◽  
Les Harrison

Abstract A rapid, simple, sensitive, and reliable determination of parts per billion (ppb) levels of chloride ion is described for high purity water or heavy water of pressurized and high temperature reactors, steam generators, and cooling systems by mercurous chloride-mercuric sulfide ion selective electrode. The method has been applied to heavy water samples of CANDU-type nuclear reactors as well as to the water of conventional steam generators. The manual method consists of treating 100 ml aliquots of standard solutions and water samples with 1 ml 2M HNO3. A calibration curve is constructed from the millivolt readings obtained in the standard solutions, and chloride ion concentration of the samples is determined by comparing the mv reading of the sample with the calibration graph. The automated and computerized version provides all operations automatically, together with a direct printout of the concentration and indexing. The electrode displays near-Nernstian response for the range 0.05–3.500 ppm chloride and can be used for concentrations as low as 0.02 ppm. Comparative tests and coefficients of variation are highly satisfactory.


Sign in / Sign up

Export Citation Format

Share Document